Search the Community
Showing results for tags 'active'.
-
Hello, this became a “known problem” after the release of SU11. However, one of your fellow customers has discovered that in fact it is the updated "Working Title GNS 430/530" that is interacting with the PAC autopilot. You can try the temporary solution, which is to use the Content Manager to temporarily remove the Working Title GNS 430/530. You will find that the PAC autopilot then works. I also have this feedback: The pms50-gns530 and autopilot are working great together- 1 reply
-
- 1
-
-
Hi Folks, My most recent system build includes an ASUS ROG Maximus XII Formula Z490 motherboard and i7-10700K CPU. (My basic system specs are included below). I have 5 internally mounted SSDs. 4 are 500GB and 1 is a 1TB equally partitioned in half to about 500GB each. I’ve never tried any of the M.2 SSDs but can’t ignore the speeds they are capable of. I am using the motherboard’s built-in cooling loop and from what I’ve read, that would help when using M.2 drives because of the heat. However, I’ve been ignoring these drives because they all seem to require displacing two or more the SATA drive ports. I may have to change out some of my 500GB SSDs and install 1TB SSDs with partitions to make up for the displaced drives. I’ll be talking to ASUS techs tomorrow about specific alternatives I may have regarding my board so I’m not looking for an answer about that here. However, my question for the Orbx community has to do with the best application and utilization of an M.2 drive if I were to install one. (Also, it should be made clear that I have not installed FS2020 in my computer yet.) I presently have Windows 10 Pro installed and I will be installing MS FS2020 soon. Therefore, if I were to install an M.2 drive, (I’m presently looking at a 1TB Seagate Firecuda M.2 PCIe Gen4 ×4 NVMe 1.4), would I have better flight-sim performance by partitioning the M.2 drive and sharing it with the O/S? I would first transfer the Windows 10 Pro O/S from its present Sata SSD location to one of the two partitions that I would create on the M.2. Then I would make a fresh installation FS2020 on the remaining partitioned space? Would that be the best way to go if I stall only a single, 1TB M.2 drive? I originally planned to install FS2020 on a dedicated SSD and may still do that, but it depends on what suggestions I get here. Thank you, Rich Basic System Specs: O/S: Windows 10 Pro 64-bit Motherboard: ASUS ROG Z490 Maximus XII Formula LGA 1200 RAM: T-Force XTreem 3600MHz, 32GB (2 x 16 gb) PSU: EVGA Supernova 1300G2 1300W PSU CPU: Intel i7–10700K (OC’d 5.2 GHz) GPU: EVGA RTX-2070 Super
-
Hello, captains, It's too soon my question, I just want to know if we have any chance of chaseplane for MFS2020, Sorry my English isn't very good a hug..
-
This is my first addon onto my xplane as i have just bought a fresh version. I have 800GB available. I have upload my log. I was told by email from Orbx: To resolve this issue please follow these steps: 1 - Open Orbx Central and go to Settings > Downloader 2 - Click on [Clear] under temporary location. 3 - If you made a backup, temporarily move it out of its folder. 4 - Open the specific product page and press [Verify files]. Nothing has changed and i have tried uninstalling it and installing it! Help would be great thanks central log.zip
-
Hello, I have been experiencing blurry textures with TE Florida in P3D V5.3 HF2 with default F-16. I have lowered my settings to no avail. When I first take off all the scenery is clear and crisp. As I come around over the lake south of KMCO the textures get blurry. It also happens just north of KMCO near downtown. My Specs are I9 9900k @5.0ghz no HT, Nvidia 2080ti (12 gigs VRAM), Win 10, 32 gig RAM. I do have T2G KMCO v2. installed. I have tried deactivating T2G Terrain just in case and it is still blurry. Any suggestion would be greatly appreciated. Thanks in advance all! Arclight -
I thought when I finally got hold of a RTX 3080 my fligh simming would be smooth sailing for a while. I tried flying out of EGLC but I run out of vram before I can even taxi on to the runway. This really suprised me. With my 1080 GTX it was almost a slide show but at least P3Dv5.3 didn't CTD. I don't have settings anywhere near maxed out. Has any one with similar system specs been more successful in this very dense scenery? Jerry System specs: Gigabyte Z390 Aorus Pro WiFi Intel Motherboard Intel Core i9-9900K Coffee Lake 3.6 GHz(5.0 GHz Turbo) EVGA CLC 240 Liquid CPU Cooler CORSAIR Vengeance LPX 32GB 3600 Gigabyte RTX 3080 10GB EVGA 850W Gold psu Windows 10, P3Dv5.3, Prosim737 Opencockpits mcp, 2efis, 2fmc, Ovhd, Stand radios
-
Hi I cannot land, start here as the aircraft instantly crashes. Real airport elevation 495 ft. If I slew in P3dv4.3 to the airport, at ground level elevation shows 509.5. All airport scenes are correct, AI operate at ground level, and my attempts using AEC have not solved it. Searching for any bgl's for LHBP have show files within Orbx Vector, but no other airport bgls. Editing the airport bgl has not produced a change, so it seems the LHSimulation airport and my Orbx files are in conflict. -
Hi there! Just took off from RWY 02L and there are massive trees on the RWY. Also on taxuway V there were a lot of trees. Anybody aware of this issues? I also have Singapore city pack installed and for the rest nothing in this area. Also not a season add-on or something that affects the trees.
-
Hi there, Recently got the new Orbx EGNT for Xplane11 and I'm finding that my frames seem to drop from about 60-70 to 30 when coming into the gate. There also seems to be a large bump at either end of the runway (worst on 07) making it quite difficult to landing without getting airborne again!! Is there any possible way to fix this? Thanks.thumb.png.0e6bec13bb7499e3e819b926d0b9d4a4.png)
-
Hello, I do have some issues with the runway textures in Samos! The RWY 09 start portion is only "satellite" image with no pavement over. Someone knows what happened? Scenario bought through Orbx Central. Thank you
-
Eastern part of airport has some elevation/texture issues. P3D v5.3 HF2 Open LC Europe Vector I tried reinstalling the scenery and veryfing the files with no luck.
-
I just bought EPMO for MSFS and can't see static planes at the gates. I reinstalled the scenery, deleted the content file and SceneryIndexes. Unfortunately, nothing helped. The only difference when switching between static and non-static is the more parking spaces available. I asked on the Drzewiecki forum, but they asked me to report here as it could be the Orbx installer fault. Thanks -
Apparently I got a problem that was fixed via patch in P3Dv3 - Snow on the airport does not match the surrounding area at all. What I tried: - Disabling all shader add-ons - Reinstalling the scenery (after verifying Norway files and doing the VECTOR elevation setup) - Making sure my insertion points are set up correctly (and the required files from Norway are set off) - Making sure I have the recommended texture settings enabled - Changing seasons (does work, only problematic with snow)
-
Hi, I have a short question. Stockholm Bromma ESSB not making P3D V5.xx? Maybe I read in Orbx 2021 Roadmap that it will be P3D Maybe Marcus, can you tell me more about this ... (?) Thanks and regards, Peter
-
active Sydney cityscape causing CTD
Muzza2022 posted a topic in Microsoft Flight Simulator Support Forum
I have just done a reinstall of MSFS and have updated everything including the new Australia update. I am running the software with no add ons besides Orbx cityscape Sydney. When loading into the game after the menu section I get a crash to desktop. I deleted Sydney cityscape and now no issues so any suggestions how I can get my much moved Orbx add ons working ? -
Hello Just curious, Orbx Sydney city, Brisbane and Adelaide sceneries have been out for a while on marketplace but not released for xbox Im just wondering what the hold up is? waiting for The Australia world update? would love to have these great sceneries that PC have because default xbox Australia is all Autogen. if anyone knows.. thanks -
Do Orbx 787 and 737 Immersion make landing & taxi lights become more intense, changing for better visiibilty at night? Tks
-
Hi, for some reason I'm having this problem again. Everything is maxed out in P3Dv4.5+ using Win Pro. Please help. Thank you.
-
Looks like I'm missing an apron texture. This occurs at EGLC (and with the odd other airport) - with all sceneries/mods etc. removed from the Community folder. Any ideas which texture it might be? It's probably a core MSFS texture, as reinstalling and/or verifying EGLC didn't fix it. H-E-L-P!! Adam. -
https://www.prepar3d.com/news/announcements/2021/12/120925/
-
I don't mean to stir the pot as Orbx have been excellent with all your offerings and I appreciate the work your team(s) have done, very high quality work. I understand the business aspect, and I see Orbx is shifting somewhat to a Publishing company also ... but P3D kept Orbx viable for almost a decade and if MSFS sales are as good as some are claiming, it would be appreciated if you could allocate some resources to updating existing P3D products with PBR and/or dynamic lights and/or sloped runways. Cheers, Rob.
- 9 replies
-
- 11
-
-
-
-
Hello everyone, I bought bluemarble but the problem is (as you can see in the picture) that Orbx LC somehow interfers with it. Of course OpenLC is must have and should stand above BlueMarble, but BlueMarble gives realistic seasons. As an example in the picture, I am flying over Yugoslavia and according to BlueMarble there should be snow (January), but Orbx LC gives snow. Maybe I wasnt careful enough when buying. Is there any sense in having BlueMarble when Orbx LC overwrites it anyway?
-
I am getting "black sided buildings" near Randolph AFB. When I get further away from the airport everything seems fine though. I already resynced the sim and verified Buildings HD. Global Base, Vector, OpenLC NA is installed. I also use Envshade and Envtex. Many thanks in advance for any advice on this issue!
-
Hi The Sode permission to load pops up every time I start the sim. That can't be right? Win 10
-
This is happening in P3D v4 at the moment. When I had FSX pre the update that caused the crashes with the ground, it was working well.
.thumb.jpg.471e4e6e5f509ff01d575c1dea7d2343.jpg)
.png.f320a5ae738364f2d31bce593d83f1ff.png)
