guuggul Posted December 16, 2019 Share Posted December 16, 2019 Anyone know what these are? They are on the runway of Bear Gulch (WA38). And can I remove them? Thank you Link to comment Share on other sites More sharing options...
bvdboomen Posted December 17, 2019 Share Posted December 17, 2019 You are missing 3D objects. There should be a bridge of which that shadow is. Also the house on the end of the runway is missing. In other cases, Objectflow is missing in the simulator. I don't know if this is the case in your situation. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 17, 2019 Share Posted December 17, 2019 Here's what you should be seeing. Link to comment Share on other sites More sharing options...
guuggul Posted December 18, 2019 Author Share Posted December 18, 2019 Interesting. I just bought the airport the same day. Any ideas what could be wrong? Should I open a support ticket? Almost forgot to mention that I have Global, Vector, Trees, Buildings, NA Land Class, PNW, etc. installed. And... I'm using Orbx Central. I'm assuming that these have all been automatically updated since I just installed them at the beginning of the sale. I also have almost 2 TB of SSD space available. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2019 Share Posted December 18, 2019 Hello, please don't open a support ticket, here is where support is provided. The missing objects are controlled by objectflow. It has to be installed, using Orbx Central and it must be installed into an Orbx Central Library, created by you. You will find the guide on creating a library in the Orbx Central user guide and the objectflow installer in your Orbx Central product list. Of course you must also have installed the Orbx Libraries, as I expect that you have already. Link to comment Share on other sites More sharing options...
guuggul Posted December 18, 2019 Author Share Posted December 18, 2019 Yes, I have Orbx Libraries in a folder called ORB and my flight simulator in P3D. I have almost 3 dozen Orbx airports (I lost count). I am using Orbx Central. How would I know if I have the libraries and objectflow installed correctly and updated? I just installed almost everything at the beginning of this sale. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2019 Share Posted December 18, 2019 Hello, please take a look in your product list, you will see objectflow in the My Products\Misc category. If you have used FTX Central before, you might also wish to check this topic. Link to comment Share on other sites More sharing options...
guuggul Posted December 18, 2019 Author Share Posted December 18, 2019 @Nick, I checked and : 1. I don't see an Orbx ObjectFlow2 folder in the "Documents\Prepar3D v4 Add-ons\" 2. I verified the files for KCMW 3. I verified the files for ObjectFlow I then launched P3D, slewed to the same problem area but didn't see any improvement or corrections. The shadow instead of bridge is still there. I'm using Win 10, 16 GB of 3200 Mhz RAM, NVMe bootdrive (lots of space), 1070ti card, etc. Any other ideas what could be wrong? Thanks. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2019 Share Posted December 18, 2019 Could your scenery complexity slider be set very low? Link to comment Share on other sites More sharing options...
guuggul Posted December 18, 2019 Author Share Posted December 18, 2019 Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2019 Share Posted December 18, 2019 Thanks. It must be objectflow, can you try verify files for it please? Link to comment Share on other sites More sharing options...
guuggul Posted December 18, 2019 Author Share Posted December 18, 2019 I verified the ObjectFlow files twice a few minutes ago. Each time after, I re-started P3D and the problem has not changed. I also rebooted the PC just to make sure there are no cache file or memory of some sort lingering somewhere. There's still a shadow instead of a bridge. Now I'm thinking, maybe I should uninstall KCMW and ObjectFlow. But if I uninstall ObjectFlow, how do I re-install? By the way, I noticed you have a shadow instead of a bridge show up in your first picture in your reply above which is the problem I'm having. How did you manage to do that? Also, just to be sure I'm doing it right, how does one verify ObjectFlow? I verified mine by going to the Misc section of Orbx Central and selecting 'Orbx ObjectFlow' and 'Verify files', and after verification, a check mark appears to the right of 'Verify files' (see below). I hope I'm doing it right. Thanks. Link to comment Share on other sites More sharing options...
Stewart Hobson Posted December 18, 2019 Share Posted December 18, 2019 It appears to this casual observer that the op's ObjectFlow file is installed in the sim's Main Library. It should actually be installed in an Orbx Central Library as outlined in Nick's post #5 above: "It has to be installed, using Orbx Central and it must be installed into an Orbx Central Library, created by you." Link to comment Share on other sites More sharing options...
guuggul Posted December 19, 2019 Author Share Posted December 19, 2019 Thanks for chime-ing in. I uninstalled KCMW. No change. I then uninstalled ObjectFlow and re-installed it to the library created by me. There is a slight change in the graphic, but it is still wrong. Now instead of being flat, the shadow has elevation. See below. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 19, 2019 Share Posted December 19, 2019 Hello, about the only visible difference between your installation and mine seems to be that KCMW is installed into an Orbx Central Library. Could you, as a test, uninstall it and reinstall it inside the P3D root folder and see if that makes it work? If it does not, it is very easily migrated back out. Thanks. Link to comment Share on other sites More sharing options...
guuggul Posted December 19, 2019 Author Share Posted December 19, 2019 @Nick , I uninstalled KCMW and re-installed by downloading it from Orbx Central (I initially manually installed it from the *.c4 file). The elevation is gone but the shadow problem in the bridge is still there. For what it's worth... I have about 1.5 TB of free space in my SSD P3D drive, over 300 GB of free space on my Win 10 Pro NVMe drive, a GTX 1070ti, and an 8700k with 16 GB of 3200 Mhz RAM. Lots of ORBX PNW and Northern California sceneries installed. I built the PC just this month after having the parts for a long time not having had the time until now. The other sceneries seem ok (how can I verify that I don't have a similar problem in the other sceneries)? An idea: is installing older versions of KCMW, ORBX library, or ObjectFlow an option? Will these work in Orbx Central? Will an older version work with the other ORBX modules? The other ORBX modules are probably the latest versions available since these were just bought during this sale. Thanks. P.S. I'm in a different time zone than you are in. I'm in San Francisco, California, US (Pacific time). Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted December 20, 2019 Share Posted December 20, 2019 Hi Please uninstall the Orbx Libraries from your F:\ORB\p3dv4 folder and reinstall them to the root simulator folder. Link to comment Share on other sites More sharing options...
guuggul Posted December 20, 2019 Author Share Posted December 20, 2019 @Doug Sawatzky , thanks. But it didn't help. Same problem. I uninstalled, re-downloaded, and installed the Orbx Library; this time into the main P3D folder.@Nick , was able to duplicate the missing bridge problem. What did he do? What makes that bridge object different from other objects in the KCMW module? Thanks. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 20, 2019 Share Posted December 20, 2019 Hello, you can see that in each screen shot is shown the objectflow status. The bridge is not the only missing object, it is the only missing object in the picture, there are many others. The bridge is not the only missing object, it is the only missing object in the picture, there are many others. Link to comment Share on other sites More sharing options...
guuggul Posted December 20, 2019 Author Share Posted December 20, 2019 @Nick Sorry, but I'm not seeing the others in the two pictures above that could be missing. They are probably in the other areas not in the picture. I repeat, how did you duplicate the problem? Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 20, 2019 Share Posted December 20, 2019 Hello, I had hoped that the black banners in the middle of the pictures would have shown you that one picture is with objectflow disabled, the box is not ticked and the second with objectflow enabled. The box is ticked. Can you check the status of the box in the add-ons menu in your copy of P3D v4 please. Link to comment Share on other sites More sharing options...
guuggul Posted December 20, 2019 Author Share Posted December 20, 2019 Here you go: Link to comment Share on other sites More sharing options...
guuggul Posted December 20, 2019 Author Share Posted December 20, 2019 Link to comment Share on other sites More sharing options...
guuggul Posted December 20, 2019 Author Share Posted December 20, 2019 Norton Security Online and the free Malwarebytes version are also disabled. Link to comment Share on other sites More sharing options...
guuggul Posted December 20, 2019 Author Share Posted December 20, 2019 Maybe this is significant. I just noticed that there are two bridges in the KCMW module's Bear Gutch Airport. The lower bridge in the picture shows up okay. So how is that different from the problematic bridge on the top of the picture? Thanks. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 21, 2019 Share Posted December 21, 2019 Hello, the troublesome wooden bridge is added by objectflow, so that it can be covered in snow in hard winter. The other bridge is a simple extrusion model which remains the same regardless of the time of year. Link to comment Share on other sites More sharing options...
guuggul Posted December 21, 2019 Author Share Posted December 21, 2019 Is this problem unique to me? I posted my PC specs the other day and I imagine lots of other people have similar setups. I can't think of anything unusual about the hardware I'm using. Also, does it only happen to KCMW? I have a lot of ORBX installed but this is the only one I've noticed so far. Link to comment Share on other sites More sharing options...
bvdboomen Posted December 22, 2019 Share Posted December 22, 2019 Do you have the Realair Scout? There is a version of Beer Gulch coming with it, which could interfere with the ORBX version. Link to comment Share on other sites More sharing options...
guuggul Posted December 23, 2019 Author Share Posted December 23, 2019 @bvdbbomen, thanks, but no I don't. This is a new pc build. The only gaming software I've installed in this so far is P3D and DCS (A10-C, Huey and two maps). I'm tempted to install FSX SE and ORBX just to test KCMW but I already have FSX SE installed in my laptop and I don't know if it's okay to install FSX SE in the desktop also. While it may be okay to install FSX SE in both laptop and desktop as long as it's not used simultaneously, I'm not sure, and I'd rather not deal with DRM issues if possible. Link to comment Share on other sites More sharing options...
guuggul Posted January 2, 2020 Author Share Posted January 2, 2020 I still have this issue unresolved. I can't believe I'm the only one in ORBX world that has this issue. Please help. Thank you. Link to comment Share on other sites More sharing options...
Nick Cooper Posted January 3, 2020 Share Posted January 3, 2020 Hello, it must be that something is stopping objectflow from working. The question is what is doing so. Link to comment Share on other sites More sharing options...
John Dow Posted January 3, 2020 Share Posted January 3, 2020 Is it possible it's a permissions issue with one or more folders? Are you running P3D as administrator? Try going into your various folders linked to P3D and maximise permissions and security and sharing right across the board. Including any in your User account folder(s). Other than that, I know during testing of objectflow there were instances where Objectflow just didn't work despite the xml entries etc appearing to be spot on. Final question, do you allow ORBX installers to install sceneries etc in default paths and to your library without any input such as from downloaded zips etc? From what I see across the forums, if you let the ORBX installers do everything (you do have to choose the location in Orbx Central, yes) then unexplained problems don't seem to occur. I know in my case I have every ORBX product installed, some to P3D floder and some to a library location and they all work perfectly ( apart from the odd mesh or update issue). Good luck with this, what a pain! Link to comment Share on other sites More sharing options...
guuggul Posted January 3, 2020 Author Share Posted January 3, 2020 @Nick Cooper I'm not sure that it is ObjectFlow though because I see (admire the animation actually) going round and round in front of the cabin and never stopping to rest. Doesn't she ever get tired? :-) By the way, I went ahead and installed FSX SE on the same PC with nothing else installed except PNW and KCMW. The same result! What is wrong with that bridge!! (I don't think I may have installed the orbx libraries or objectflow for FSX SE though). I also tried switching the weather to Winter in both FSX SE and P3D. Same problem. That bridge just refuses to show up. A thought: under what file is that bridge located in? If you send me the hash tag of the file (or I can send mine to you), I can run a checksum (http://onlinemd5.com/) to see if we are using the exact same file.@John Dow thanks for chiming in. Yes, I'm logged into Win 10 as admin ('Dadmin' actually), and run P3D as 'administrator'. With regards to auto install, I downloaded the *.C4 file and installed from there, but I will try your suggestion and uninstall the module and install directly from Orbx Central without using the *.c4 file. And, I will post back. I am not feeling hopeful though considering I have about 50+ Orbx stuff installed already in this month-old PC and all except S43 (another topic) apparently working fine. Thank you. Link to comment Share on other sites More sharing options...
guuggul Posted January 3, 2020 Author Share Posted January 3, 2020 Problem solved!@John Dow thank you, thank you, thank you. Your suggestion about not using any input when installing and letting the installer do its thing was the solution. The bridge magically appeared when the module is installed in the P3D folder (not the 'main library') without manual installation. This is one really really weird, weird problem. Why does the module behave like that... (rhetorical question... I'm not expecting an answer, but if I was a programmer I'd be curious to find out, and single step and trace the root cause of that problem). This is a great example of adding a feature (being able to install modules in another location and using a c4 file) results in a new issue. @John Dow , @Nick Cooper owes you a cigar. :-) P.s. I don't know how to label this issue as 'solved'. Am I supposed to? Link to comment Share on other sites More sharing options...
bvdboomen Posted January 3, 2020 Share Posted January 3, 2020 guuggul, you still have the elevated water under the bridge. Maybe you can solve that by entering the scenery library in P3D and directly press OK without changing anything. In many cases that solves elevation problems of this kind. Link to comment Share on other sites More sharing options...
guuggul Posted January 3, 2020 Author Share Posted January 3, 2020 4 minutes ago, bvdboomen said: guuggul, you still have the elevated water under the bridge. Maybe you can solve that by entering the scenery library in P3D and directly press OK without changing anything. In many cases that solves elevation problems of this kind. Another magic show... that fixed it. Beautiful! I hope Nick Cooper has a boxful of cigars because he owes you one too. Thank you @bvdboomen! Link to comment Share on other sites More sharing options...
Nick Cooper Posted January 3, 2020 Share Posted January 3, 2020 On 12/18/2019 at 8:56 AM, Nick Cooper said: Hello, please don't open a support ticket, here is where support is provided. The missing objects are controlled by objectflow. It has to be installed, using Orbx Central and it must be installed into an Orbx Central Library, created by you. You will find the guide on creating a library in the Orbx Central user guide and the objectflow installer in your Orbx Central product list. Of course you must also have installed the Orbx Libraries, as I expect that you have already. Hello, kind of you to offer me that chance to give away cigars but the answer is still the same. One can see that you have already had the product installed in the P3D root folder in your screen shot here: Perhaps the advice from John not to interfere with the installation was the key, but as we are not able to stand over customers and see what they are actually doing, versus what they say they are doing, we are at a constant disadvantage. I am delighted that you have finally installed the same version as all the other customers, perhaps you can now apply the same approach to your other problem. Link to comment Share on other sites More sharing options...
guuggul Posted January 4, 2020 Author Share Posted January 4, 2020 @Nick Cooper, I followed the advise on my other problem. The elevation issue was resolved, but a new problem on the same airport came up. See details there please. Thank you. Link to comment Share on other sites More sharing options...
John Dow Posted January 4, 2020 Share Posted January 4, 2020 One final (I hope) note on this topic. Can you try a landing and see if the bridge is landable? Mine isn't, the aircraft sinks through the decking... @Nick Cooper Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.