skyhawk21 Posted December 15, 2018 Share Posted December 15, 2018 After installing the newest fix that included newer .dll files for objectflow 2, one pre 4.3 for Prepar3D and one for Prepar3D 4.3 and newer, KSFF scenery from ORBX is broken again. Anything that uses objectflow version 2 and maybe older versions as well as the people library does not work anymore with this scenery. im assuming it’s because the original scenery has not been updated to support all the newer .dll library files for people flow and objectflow. is there going to be a fix in the works or coming soon or do customers get a refund since it will never be fixed? whats broken at the KSFF airport is roof and building walls missing textures, also all objects and people are missing at the airport that use to be there before all the newer ftx updates and objectflow .dll library files. Currently using Prepar3D 4.3 with all orbx addons, using the correct regions and most up to date airport scenery’s from orbx. objectflow 2 is enabled because it works for most airports just not KSFF anymore. thank you. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 15, 2018 Share Posted December 15, 2018 Hello, If you are seeing no roofs at KSFF, than objectflow is not working for you. Despite your assertions, objectflow works just as it should in P3D. Please ensure that yours is using the correct version for your version of P3D and that it is ticked in both FTX Central and P3D add-ons. Whether or not you see people at this or other airports does not indicate that objectflow is working or not, peopleflow is something quite different. No roofs at KSFF has only one cause. Link to comment Share on other sites More sharing options...
skyhawk21 Posted December 17, 2018 Author Share Posted December 17, 2018 Once again as stated, objectflow2 is enabled like always in ftx central and in Prepar3D 4.3 under addons and its using the correct .dll file. KSFF is broken and it has had this problem for quite some time after all the updates made to objectflow libraries which broke support from the scenery. on a test system install al p3d 4.3 full install clean, then install ftx central, then install orbx libraries, then run p3d, then when it asks to enable objectflow v2, click ok or yes. Quit p3d, run ftx central, install ftx global, lc, vector, correct regions then KSFF. then go take off at main default runway and direction, hit “y” for slew mode, go place aircraft over tower and hanger area and observe all people flow and objectflow objects missing. search your own forums and other customers have the same problem recently and backdated to 2016 or so.. so if it won’t be fixed or repaired, I would like a refund please for a faulty product... as well as other customers.. thank you. Link to comment Share on other sites More sharing options...
Eugene Kremlev Posted December 17, 2018 Share Posted December 17, 2018 @Nick Cooper hello, I don't want to create topic if I get a solution here)). I upgraded on v4.4 (client, content, scenery) and really no roofs, though on v4.3 is OK. App (verify files) something downloaded but not fix this problem - no roofs. What's problem in v4.4? Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 17, 2018 Share Posted December 17, 2018 Hello, If you are seeing no roofs at KSFF, than objectflow is not working for you. P3D v 4.4 Link to comment Share on other sites More sharing options...
Eugene Kremlev Posted December 17, 2018 Share Posted December 17, 2018 @Nick Cooper What's problem still? Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 17, 2018 Share Posted December 17, 2018 Hello, the problem to explore is why objectflow is not working for you. Can you attach C:\Users\kreml\Documents\Prepar3D v4 Add-ons\Orbx ObjectFlow 2\add-ons.xml and C:\Users\kreml\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-0ns.cfg please? Also, if possible, a screen shot of C:\Users\kreml\AppData\Local\Orbx\FTXCentral\v3.3.2.2. Also, is your user account an administrator? Thanks. Link to comment Share on other sites More sharing options...
Eugene Kremlev Posted December 17, 2018 Share Posted December 17, 2018 1 hour ago, Nick Cooper said: Hello, the problem to explore is why objectflow is not working for you. Can you attach C:\Users\kreml\Documents\Prepar3D v4 Add-ons\Orbx ObjectFlow 2\add-ons.xml and C:\Users\kreml\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-0ns.cfg please? Also, if possible, a screen shot of C:\Users\kreml\AppData\Local\Orbx\FTXCentral\v3.3.2.2. Also, is your user account an administrator? Thanks. Yes, acc an admin add-on.xml add-ons.cfg Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 17, 2018 Share Posted December 17, 2018 Thanks. I see nothing obvious wrong. How does ENNK look? Link to comment Share on other sites More sharing options...
Eugene Kremlev Posted December 17, 2018 Share Posted December 17, 2018 1 hour ago, Nick Cooper said: Thanks. I see nothing obvious wrong. How does ENNK look? Now don't installed scenery Norway, but Northern Rockies and KSFF was install after removed Norway and scenerys EN... Could this be the reason? Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 17, 2018 Share Posted December 17, 2018 Most unlikely but you could try reinstalling KSFF. Link to comment Share on other sites More sharing options...
Eugene Kremlev Posted December 18, 2018 Share Posted December 18, 2018 13 hours ago, Nick Cooper said: Most unlikely but you could try reinstalling KSFF. Hello, Nick, reinstall the KSFF positive results did not give — no roofs Other airports NRM and CRM — OK. AU — OK. If the objectflow was not connected - other airports would show it. Any ideas? Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2018 Share Posted December 18, 2018 If you install ENNK, you will either see it as the developer intended or not, depending on whther or not objectflow is working. I don't think that the KSFF airport model is defective, since it works here, as shown in the screen shots and on thousands of other computers. Link to comment Share on other sites More sharing options...
Eugene Kremlev Posted December 18, 2018 Share Posted December 18, 2018 1 hour ago, Nick Cooper said: If you install ENNK, you will either see it as the developer intended or not, depending on whther or not objectflow is working. I don't think that the KSFF airport model is defective, since it works here, as shown in the screen shots and on thousands of other computers. mmmm.... Nick, Narvik - OK So, the problem is found. If use the summer landscape, then everything is in order. If it is winter, then the problem will appear again. Nick, switch to winter. ENNK in winter — OK. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2018 Share Posted December 18, 2018 Thanks. I have run out of ideas but I will ask the developer of KSFF to take a look at this topic. Link to comment Share on other sites More sharing options...
John Dow Posted December 18, 2018 Share Posted December 18, 2018 Well dang me... he's right. Winter selection makes the roofs disappear! Can confirm. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2018 Share Posted December 18, 2018 Thanks to you both, I am in touch with the developer who will be here soon. Link to comment Share on other sites More sharing options...
Jarrad Marshall Posted December 18, 2018 Share Posted December 18, 2018 Hi guys, Could you please try this fix: 1. Download the attached file 2. Place it in the KSFF scenery folder: Lockheed Martin\Prepar3D v4\ORBX\FTX_NA\FTX_AA_KSFF\Scenery 3. This file will replace an older version of the same file. Test it at KSFF during any month of the year, it should fix the issue. Let me know how you go, Cheers, Jarrad Westsim_Spokane_Placement_Roof_ObjectFlow.xml Link to comment Share on other sites More sharing options...
Friedi Gulder Posted December 18, 2018 Share Posted December 18, 2018 thank you Jarrad, looks good now. KSFF in July KSFF in February Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 18, 2018 Share Posted December 18, 2018 Fix developed, beta tested and published in two hours. Thanks to Jarrad and Friedi and to Eugene for pinpointing the problem. Link to comment Share on other sites More sharing options...
Stewart Hobson Posted December 18, 2018 Share Posted December 18, 2018 I remember a similar fix for KSFF being posted several months ago. Since installing that fix, I've had winter roofs at KSFF. Link to comment Share on other sites More sharing options...
Eugene Kremlev Posted December 18, 2018 Share Posted December 18, 2018 Thanks, guys! Now all OK! Link to comment Share on other sites More sharing options...
Stewart Hobson Posted December 18, 2018 Share Posted December 18, 2018 Sorry, Nick. I would have thought the fix would have been incorporated into an update by now. Guess not... Link to comment Share on other sites More sharing options...
PhugoidEffect Posted January 6, 2019 Share Posted January 6, 2019 Is it possible to release this correction into scenery update so that the Orbx tool may advise us to update it? Thanks. Link to comment Share on other sites More sharing options...
purduekev Posted January 13, 2019 Share Posted January 13, 2019 On 1/6/2019 at 2:31 AM, PhugoidEffect said: Is it possible to release this correction into scenery update so that the Orbx tool may advise us to update it? Thanks. I have to agree - it would seem that with FTX Central it would be preferable to push this fix out to users as an update so we did not have to do this manually. I would not have known about this fix until I tried to fly into KSFF yesterday and saw the missing roofs problem (flying in winter), and then came here to do a manual search as to what the problem might be. It would be much less hassle if this was rolled out as an official update. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.