jamiequest Posted February 3, 2020 Share Posted February 3, 2020 Hello My ORBX England is acting weird. the Sea textures that are loaded are made of grass and on the coastline, the earth texture has leaked over. When I disable the file shown in the image, the problem is solved but the airports act weird. Please help! Thanks Link to comment Share on other sites More sharing options...
Stewart Hobson Posted February 4, 2020 Share Posted February 4, 2020 Shouldn't that last item in your scenery library in your screenshot be "checked"? Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted February 4, 2020 Share Posted February 4, 2020 Hi Also, please uninstall the Orbx Libs from the external library folder and install them to the simulator root ORBX folder. Link to comment Share on other sites More sharing options...
Bastlwastl Posted February 4, 2020 Share Posted February 4, 2020 56 minutes ago, Doug Sawatzky said: Hi Also, please uninstall the Orbx Libs from the external library folder and install them to the simulator root ORBX folder. Is that a general recommendation? If yes, why does Orbx Central offer the possibility to install it into a library? thank you regards Sebastian Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted February 4, 2020 Share Posted February 4, 2020 It is if you are having issues, for some reason not all are having issues of this nature....but seeing as how it is part of the Global base installation and Global base can not be installed outside the simulator folder, it only makes sense to install the Orbx Libraries in the same location. Maybe if you do not have Global base installed the Orbx Libs will work just fine in the external library configuration, but that is just a theory of mine and not tested. Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 On 2/4/2020 at 12:11 AM, Stewart Hobson said: Shouldn't that last item in your scenery library in your screenshot be "checked"? I said if its disabled, the grass problem goes away but it makes other problems. Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 On 2/3/2020 at 6:54 PM, Doug Sawatzky said: It is if you are having issues, for some reason not all are having issues of this nature....but seeing as how it is part of the Global base installation and Global base can not be installed outside the simulator folder, it only makes sense to install the Orbx Libraries in the same location. Maybe if you do not have Global base installed the Orbx Libs will work just fine in the external library configuration, but that is just a theory of mine and not tested. I moved it into the root p3d folder and it did nothing Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 Please help I need help urgently Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 Hello, can you now attach a copy of your scenery.cfg file please? Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 8 hours ago, Nick Cooper said: Hello, can you now attach a copy of your scenery.cfg file please? Sure Here it is: Be aware, I have FTX England unchecked/uninstalled in the scenery library scenery.cfg Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 Thanks. I see in it and in your previous image that you need to reset the insertion point so that your open LC products are below your airports and regions. I see also that EU England is not presently in the scenery library. Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 Just now, Nick Cooper said: Thanks. I see in it and in your previous image that you need to reset the insertion point so that your open LC products are below your airports and regions. I see also that EU England is not presently in the scenery library. ill try that now see if it fixes the problem. Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 3 minutes ago, Nick Cooper said: Thanks. I see in it and in your previous image that you need to reset the insertion point so that your open LC products are below your airports and regions. I see also that EU England is not presently in the scenery library. What do the files of EU England look like? Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 The two at the bottom in your image, there are two more, 07 and 08. Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 Just now, Nick Cooper said: The two at the bottom in your image, there are two more, 07 and 08. Ahh I see. The only thing rearranging my Scenery library so that ORBX!OPENLC_... products so that they are below my regions and global did was this Didnt fix the issue, if anything made it worse... please help ! Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 You don't seem to have any regions installed. Or are they installed using the add-ons method? Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 Just now, Nick Cooper said: You don't seem to have any regions installed. Or are they installed using the add-ons method? By regions do you mean FTX England? Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 2 minutes ago, Nick Cooper said: You don't seem to have any regions installed. Or are they installed using the add-ons method? scenery.cfg Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 3 minutes ago, Nick Cooper said: You don't seem to have any regions installed. Or are they installed using the add-ons method? Should I try migrating to the Library? I just really need to fix this. It was all fine up until a few weeks ago where I modded my texture folder then deleted it and used content and client repair tools to replace it. Not sure if that has anything to do with it. I have tried doing the P3D setup repair and ''Delete Generated Files'' shortcut. Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 Is your copy of EU England installed inside the P3D v4 \ ORBX folder or outside, in an Orbx Central Library? Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 Just now, Nick Cooper said: Is your copy of EU England installed inside the P3D v4 \ ORBX folder or outside, in an Orbx Central Library? Inside the ORBX folder in P3D root Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 Thanks, then it should appear in the scenery.cfg file but apparently does not. Can you first do this: 1. Delete (Your P3D root folder)\Scenery\BASE\Scenery\lclookup.bgl. 2. Delete C:\ProgramData\Lockheed Martin\Prepar3D v4\terrain.cfg 3. Run P3D v4 once, which will replace the file with a default version, then close P3D v4 again. Then run Verify Files for each of your products and the Orbx Libraries, then run Sync Simulator. That should effectively fix all the Orbx products, so then try P3D v4 again. Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 12 minutes ago, Nick Cooper said: Thanks, then it should appear in the scenery.cfg file but apparently does not. Can you first do this: 1. Delete (Your P3D root folder)\Scenery\BASE\Scenery\lclookup.bgl. 2. Delete C:\ProgramData\Lockheed Martin\Prepar3D v4\terrain.cfg 3. Run P3D v4 once, which will replace the file with a default version, then close P3D v4 again. Then run Verify Files for each of your products and the Orbx Libraries, then run Sync Simulator. That should effectively fix all the Orbx products, so then try P3D v4 again. Hello After doing that, P3D wont start up. It gets to scenario selection screen then shuts off completely Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 Thanks, can you post a copy of your scenery.cfg file as it is now please Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 Edit: Uploaded newer one scenery.cfg Link to comment Share on other sites More sharing options...
jamiequest Posted February 8, 2020 Author Share Posted February 8, 2020 52 minutes ago, Nick Cooper said: Thanks, then it should appear in the scenery.cfg file but apparently does not. Can you first do this: 1. Delete (Your P3D root folder)\Scenery\BASE\Scenery\lclookup.bgl. 2. Delete C:\ProgramData\Lockheed Martin\Prepar3D v4\terrain.cfg 3. Run P3D v4 once, which will replace the file with a default version, then close P3D v4 again. Then run Verify Files for each of your products and the Orbx Libraries, then run Sync Simulator. That should effectively fix all the Orbx products, so then try P3D v4 again. Got the sim to start again. I followed these steps and the issue has been resolved Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 8, 2020 Share Posted February 8, 2020 Good news, thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.