connieflyer Posted April 30, 2015 Share Posted April 30, 2015 I had to reinstall fsx and all software after hard drive crash, I have all the ftx products reinstalled but the Nature Flow (grass and tree movement) no longer shows up. I have checked the dll.xml file for orphans and reinstalled several airports as well as Na blue but nothing brings back movement. Also made sure all libraries have been updated. The People Flow works fine and I see the Orcas and bird's flying. Stumpped. Thank you. Order #FSS0110761 for Na blue and other titles. Installed Orbx ProductsREGIONCentral Rockies FTX NA CRM Central Rocky Mountains V1.00 Patch 004 February 2015Northern Rockies FTX NA NRM Northern Rocky Mountains V1.00 PATCH 004 April 2014Pacific Fjords FTX NA PFJ Pacific Fjords V1.1 Patch 004 April 2014Pacific Northwest FTX NA PNW PACIFIC NORTHWEST V1.0 PATCH 008 February 2014AIRPORT0S9 FTX US 0S9 Jefferson County Intl Version 1.1 - January 20122S1 FTX US 2S1 VASHON ISLAND VERSION 1.1 - June 201074S FTX US 74S ANACORTES AIRPORT VERSION 1.00 - 13th October 20117S3 FTX US 7S3 STARK'S TWIN OAKS VERSION 1.00 (PATCH 002) - Jan 20117WA3 FTX NA 7WA3 West Wind Airfield Version 1.00CEF4 FTX CA CEF4 AIRDRIE AIRPORT VERSION 1.10 AUG 2013CEJ4 FTX CAN CEJ4 CLARESHOLM INDUSTRIAL VERSION 2.00CEN4 FTX CAN CEN4 HIGH RIVER REGIONAL AIRPORT VERSION 2.10CZST FTX NA CZST STEWART AIRPORT VERSION 1.10 January 2014KBVS FTX US KBVS SKAGIT REGIONAL AIRPORT - Version 1.1 - January 2012KHQM FTX NA KHQM BOWERMAN AIRPORT VERSION 1.0KORS FTX US KORS ORCAS EASTSOUND AIRPORT VERSION 1.20 October 2014KTVL FTX US KTVL LAKE TAHOE AIRPORT VERSION 1.10 February 2015KWYS FTX US KWYS WEST YELLOWSTONE AIRPORT VERSION 1.10 NOV 2012WA56 FTX US WA56 ISRAEL'S FARM VERSION 1.05 - November 2014WA79 FTX US WA79 WALTER SUTTON'S VERSION 1.1 - April 2011OTHERNorth America Freeware Packs FTX GLOBAL FREEWARE AIRPORTS NORTH AMERICA PACKS 1 to 21 March 2015North American AI Traffic FTX NA GA AI Traffic V1.20 March 2014Orbx Libraries FTX AA ORBX LIBRARIES VER 150331 31st MARCH 2015Yosemite National Park FTX US YOSEMITE VALLEY VERSION 1.00 - September 2014UNKNOWNFTX_GLOBAL_FREEWARE_NA10 FTX GLOBAL FREEWARE AIRPORTS NORTH AMERICA PACK 10 - March 2014FTX_NA_CBB7 FTX CA CBB7 TIPELLA AIRPORT 1.00 JULY 2013 Link to comment Share on other sites More sharing options...
Stewart Hobson Posted April 30, 2015 Share Posted April 30, 2015 To the best of my knowledge, not all of the places have Nature Flow. Some places the trees move; other places they don't. If the people are moving, then I would assume you are ok. Stew Link to comment Share on other sites More sharing options...
connieflyer Posted April 30, 2015 Author Share Posted April 30, 2015 Isreal's Farm the grass used to move and the trees did also, the birds are still present and take flight no people though. No vegitation movement anywhere. Link to comment Share on other sites More sharing options...
jabble Posted April 30, 2015 Share Posted April 30, 2015 Check your scenery sliders - AFAIK some of the features only happen when they're towards the right. Link to comment Share on other sites More sharing options...
Holger Sandmann Posted April 30, 2015 Share Posted April 30, 2015 Hi connieflyer, I'm pretty sure that there's no "moving vegetation" at WA56, these dynamic objects are only used at some of the payware airports; in your case you should the moving trees at CZST and both moving grass and trees at CEF4. Cheers, Holger Link to comment Share on other sites More sharing options...
connieflyer Posted May 25, 2015 Author Share Posted May 25, 2015 I have all the sliders to the right and checking the payware airports that I have, none of the sites have the moving vegitation anymore. Link to comment Share on other sites More sharing options...
Bruce Hamilton Posted May 25, 2015 Share Posted May 25, 2015 Have you checked to make sure Advanced Animations is active? Link to comment Share on other sites More sharing options...
connieflyer Posted May 25, 2015 Author Share Posted May 25, 2015 Yes checked advanced animations, also went into all control panels and made all animations both default and then maximum. Just boughtw16 Monroe and s45 Sliletz Bay they both have advanced flow tech none of the vegitation or animal, insects show up. Hope I don't have to delete everything and start over, I will be pissed Link to comment Share on other sites More sharing options...
Ed Correia Posted May 25, 2015 Share Posted May 25, 2015 I believe Holger answered this, there is no moving vegetation to be seen at Israel's Farm. Link to comment Share on other sites More sharing options...
connieflyer Posted May 26, 2015 Author Share Posted May 26, 2015 Check the earlier threads that show all the orbx software including the last two I just purchased today, some have moving vegetation, the order today even have butterflies, dogs, and other moving objects. None of these are working Ed. Link to comment Share on other sites More sharing options...
Ed Correia Posted May 26, 2015 Share Posted May 26, 2015 Ok, so you have Orbxlibs up to date and ObjectFlow present and active in the DLL.xml, correct? Check the individual airport control panel options and check if there are options to enable or disable these extra features. With all these confirmed you will see these features where they are placed. I cannot help on that, the individual developed will need to chime in as they can confirm what they have placed and where and if they are only active at certain times/seasons. Link to comment Share on other sites More sharing options...
connieflyer Posted May 27, 2015 Author Share Posted May 27, 2015 ED all orbxlibs up to date objectflow prestn an tive in dll.xml. I do get some tree movements, people movement, ai aircraft moving, but none of the grass moves like it did in the past, opened all control panels, went through and re clicked module installer where one was available. I guess this is the best it will get now. Still have the old hard drive with everything installed may re-install that and try that, or may try running it from one of the image files. Thank you for your help Link to comment Share on other sites More sharing options...
Ed Correia Posted May 27, 2015 Share Posted May 27, 2015 From you list of installed products, I cannot pull up order numbers for: 0S9 FTX US 0S9 Jefferson County Intl Version 1.1 - January 2012 7S3 FTX US 7S3 STARK'S TWIN OAKS VERSION 1.00 (PATCH 002) - Jan 2011 CEF4 FTX CA CEF4 AIRDRIE AIRPORT VERSION 1.10 AUG 2013 CZST FTX NA CZST STEWART AIRPORT VERSION 1.10 January 2014 KTVL FTX US KTVL LAKE TAHOE AIRPORT VERSION 1.10 February 2015 KWYS FTX US KWYS WEST YELLOWSTONE AIRPORT VERSION 1.10 NOV 2012 WA79 FTX US WA79 WALTER SUTTON'S VERSION 1.1 - April 2011 Do you have any numbers for those? Link to comment Share on other sites More sharing options...
connieflyer Posted May 28, 2015 Author Share Posted May 28, 2015 http://i179.photobucket.com/albums/w295/dharris1_photo/Dynamig.jpg http://i179.photobucket.com/albums/w295/dharris1_photo/S43.jpg http://i179.photobucket.com/albums/w295/dharris1_photo/KWYS.jpg http://i179.photobucket.com/albums/w295/dharris1_photo/Stark.jpg http://i179.photobucket.com/albums/w295/dharris1_photo/CEF4.jpg This is what I get when trying to check options. Link to comment Share on other sites More sharing options...
connieflyer Posted May 28, 2015 Author Share Posted May 28, 2015 Only thing left to do is uninstall all orbx products, and if I make it through surgery next month try to reinstall one at a time to see what it is. at this point I guess it does not matter that much. Link to comment Share on other sites More sharing options...
Ron Attwood Posted May 29, 2015 Share Posted May 29, 2015 Another happy customer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.