mikee Posted July 15, 2020 Share Posted July 15, 2020 Hello , I have just finish Installing my Prepar3DV5 and also All of my Orbx Compatible products ! In my first flight i realized that i am missing All of the Buildings plus grass at 11S !! I tried to Uninstall the Airport but still the same issue ! I have also tried to Uninstall and Reinstall Orbx People flow ( Which is correct Installed into my C: Users : Mike : Orbx library !! ) Any idea what is going On ? Thank you , Mike Link to comment Share on other sites More sharing options...
BrianV Posted July 15, 2020 Share Posted July 15, 2020 11S has played tricks with several of us: In my case, it is working fine now, thankfully, after having problems similar to yours. You might want to try some of the suggestions in the above link. Also, make sure you have no conflicting sceneries from other developers. Some time ago, Kos caused problems and a few others but I think most of this has been sorted now. Link to comment Share on other sites More sharing options...
Nick Cooper Posted July 15, 2020 Share Posted July 15, 2020 Hello, missing buildings and runway textures are inevitably the result of a non-working objectflow. Please have a look here. Link to comment Share on other sites More sharing options...
mikee Posted July 15, 2020 Author Share Posted July 15, 2020 Hello Nick and Brian ! I have a folder into my C: Users : Mike : Orbx Library : P3DV5 which contains : 5 folders : 1 ) Global TerraFlora v2 2 ) KSUN Friedman Memorial Airport 3) LGKO Kos International Airport 4) Orbx ObjectFlow And 5) SODE SimObject Display Engine Total of 8.18 gb's ! My Libraries are Installed into C: Users\Mike\Orbx Library 8.2gb My 11s is Installed into my C: Program Files : LM : Prepar3DV5 : Orbx : FTX_NA Folder !! What am i doing wrong and i cannot see any buildings ? I read through the topic you just sent to me , but i am still Unable to fix my Issue !! I Just Run Orbx Central and In the Insertion Point and into Orbx Airports and Regions and Also into Orbx Global openLC There are No Orbx Products Visible !! I have Installed Almost all of them ! I can see Everything Installed into my C:Drive and into my P3DV5 Root , Orbx folder ! And also into my P3DV5 Scenery Library ! Thank you , Mike Link to comment Share on other sites More sharing options...
Nick Cooper Posted July 15, 2020 Share Posted July 15, 2020 Hello, please try this: Create a new Orbx Central Library at C:\Orbx Central Library. Then uninstall objectflow from C: Users\Mike\Orbx Library and instead, install it into C:\Orbx Central Library. Then try 11S again. Thanks. Link to comment Share on other sites More sharing options...
mikee Posted July 15, 2020 Author Share Posted July 15, 2020 33 minutes ago, Nick Cooper said: Hello, please try this: Create a new Orbx Central Library at C:\Orbx Central Library. Then uninstall objectflow from C: Users\Mike\Orbx Library and instead, install it into C:\Orbx Central Library. Then try 11S again. Thanks. Hello Nick , Just followed your suggestion , Still No Buildings ! I have No Other Addons from Any Other Developers ! Mike Link to comment Share on other sites More sharing options...
Nick Cooper Posted July 15, 2020 Share Posted July 15, 2020 Can you see objectflow in your add-ons list and is it ticked? You say "There are No Orbx Products Visible !!" but your first shot shows Orbx 11S is there, but has some elements missing. Link to comment Share on other sites More sharing options...
mikee Posted July 15, 2020 Author Share Posted July 15, 2020 Nope ! Link to comment Share on other sites More sharing options...
Nick Cooper Posted July 15, 2020 Share Posted July 15, 2020 Please try running Sync Simulator, see if that helps. Link to comment Share on other sites More sharing options...
mikee Posted July 15, 2020 Author Share Posted July 15, 2020 Something is definitely wrong Nick ! I run Sync Simulator and now Object flow is enable and ticked , but Still No buildings at 11s ! And yes all of my Orbx Products are Installed and Visible in my Scenery Library in my Sim ! But when i checked into my Orbx Central and into Insertion Point , there are No Orbx Product visible there ! Other than the default Ones plus Traffic Global and FSGlobal 2020 ! Is this Normal ? Mike Link to comment Share on other sites More sharing options...
Nick Cooper Posted July 15, 2020 Share Posted July 15, 2020 Hello, yes, it is perfectly normal. Orbx products do not show up individually, but collectively, as Airports and Regions. They will show up in your scenery library in the game. Link to comment Share on other sites More sharing options...
mikee Posted July 15, 2020 Author Share Posted July 15, 2020 16 minutes ago, Nick Cooper said: Hello, yes, it is perfectly normal. Orbx products do not show up individually, but collectively, as Airports and Regions. They will show up in your scenery library in the game. Ok thanks Nick ! Anything else i should do regarding my issue ? Link to comment Share on other sites More sharing options...
mikee Posted July 15, 2020 Author Share Posted July 15, 2020 Hello Nick , I checked Other Airports as well : S45 05S Vernonia : And there is No Object Flow either ! Thank you ! Link to comment Share on other sites More sharing options...
Sniper31 Posted July 15, 2020 Share Posted July 15, 2020 8 hours ago, BrianV said: 11S has played tricks with several of us: In my case, it is working fine now, thankfully, after having problems similar to yours. You might want to try some of the suggestions in the above link. Also, make sure you have no conflicting sceneries from other developers. Some time ago, Kos caused problems and a few others but I think most of this has been sorted now. In my case, as already noted by myself and Nick, my situation is that half of my buildings AND terrain AND vegetation is missing from the airport and surrounding area. Also noted, is I have NO scenery, I repeat NO scenery from ANYONE besides Orbx....none, nada, zilch. In any case, thank you for trying to help me. Cheers! Link to comment Share on other sites More sharing options...
mikee Posted July 15, 2020 Author Share Posted July 15, 2020 Hello , Whatever i do Nothing works ! I have realized that i am missing Buildings and Object flow in many Airport's ! I have Uninstalled and Reinstalled my Libraries and also People flow , but No Luck up to now ! Are my Libraries correct Installed or am i missing anything ? Am i missing Orbx Libraries from Addons ? Link to comment Share on other sites More sharing options...
Smudger Posted July 15, 2020 Share Posted July 15, 2020 Hello Mike, you will need to create a new library for your Object Flow in a folder any place you choose, but, away from Windows. You are currently in C:\Users, another drive or partition or if it must be on C: create a new folder it will use 7mb. Uninstall Object Flow and reinstall to your new location. Link to comment Share on other sites More sharing options...
mikee Posted July 16, 2020 Author Share Posted July 16, 2020 Hello , I was about to give up , but i finally managed to solve my OF issues ! At first i followed Nick advice to : [ Create a new Orbx Central Library at C:\Orbx Central Library. Then uninstall objectflow from C: Users\Mike\Orbx Library and instead, install it into C:\Orbx Central Library. Then try 11S again. ] But It Did Not worked !! Then i tried Several times to Uninstall Reinstall Libraries and OF but still Nothing Worked ! And Today i followed one Last time Smudger's Advice ! ( By the Way OF uses 2.35mb ) . It Worked I am Very Happy ! Thank you all for your Help , much appreciated !! Link to comment Share on other sites More sharing options...
Nick Cooper Posted July 16, 2020 Share Posted July 16, 2020 Interesting, as Smudger's advice is exactly the same as mine. Good news that it is now working. Link to comment Share on other sites More sharing options...
mikee Posted July 18, 2020 Author Share Posted July 18, 2020 On 7/16/2020 at 9:47 AM, Nick Cooper said: Interesting, as Smudger's advice is exactly the same as mine. Good news that it is now working. Indeed ! No idea why it did not work the first time ! I appreciate your help Nick Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.