Ed Correia

Not as yet, still needing time to investigate.

Hi all, a new update for the F-35 Lightning II is now available on OrbX Central. GENERAL STABILITY UPDATE (NEW HMD), NEW REPAINTS AND MISCELLANEOUS FIXES/IMPROVEMENTS - (Old HMD) Removed obsolete Javascript code for HUD collimation - (Old HMD) Removed obsolete Javascript code for Flight Director functions - (Old HMD) Removed unused Javascript code for Boeing FMA, ILS and Vertical Speed indicator - (Old HMD) Improved symbology collimation - NEW HMD: Entirely rewritten on the basis of the F/A-18E HUD from Asobo, with several improvements and customizations - Changed engine sound samples and modified volume - Added VMFA-314 livery for the F-35C (courtesy of Richard Luycx) - Added VMFA-211 high and low viz liveries for F-35B (courtesy of Richard Luycx) - Added VMFA-122 high and low viz liveries for F-35B (courtesy of Richard Luycx) - Fixed texture mirroring issue on F-35B NLG Doors - Fixed US roundel position on F-35C wings lower surfaces - Fixed incorrect painting of air intakes inner surfaces (all models) - Added different downwash effects (neutral, water and dust) for F-35B when in STOVL mode - Improved Low Altitude warning logic - Fixed incorrect material assignment in F-35C intakes (virtual cockpit only) - Fixed visual hole in aircraft ground shadow (when viewed from the Virtual Cockpit) - Added several sounds missing from the virtual cockpit (safety ribbons, ejection seat lever and some switches) - Added "click" sound to PCD interaction for improved feedback - Minor fix to ICAO codes and model names - Reworked pilot visibility conditions (hopefully this shoudl work in multiplayer) - Automatic speedbrake retraction if throttle is above 85% - Automatic speedbrake extension during landing ground roll - Added "radio noise" filtering to LSO voices - Improved "Prandtl-Glauert" singularity visibility conditions - Special Effects are now visible from the cockpit * * - NOTE: due to a glitch in the sim, if you change view when an effect is playing it may stick to "on" condition on the new view. Cycling views will typically fix the glitch. IMPORTANT – Due to several reports of random CTD issues, we have identified the HMD code to be a cause of potential instability on some systems. To fix the problem we have created a new HMD basing it on the Asobo Super Hornet code – however it is missing some functionalities of the “complete” version. The new HMD is the default, the old one can be re-activated by following the instructions at the end of the panel.cfg file in the F-35A panel folder. DO NOT ATTEMPT to change this is you are not familiar with .cfg file editing, although backup .cfgs are included.

We have excludes in place that "may" exclude the photogrammetry for that product, though I doubt it will be compatible. We tend to steer clear of these GE photogrammetry products so its untested.

Issue appears localised to the immediate area of KRND, so we will be chatting with LM about this.

I'll need to go to LM as we saw this in one of the 5.x betas and the new PBR changes made with autogen.

Confirming that there is no interior modelling for this product.

AccuSeason and AIG traffic are used in the screenshots.

Hi all, Aeroplane Heaven have provided another update to the P-51 and is now available on Orbx Central. Changelog 1. Coolant and oil safety radiator flaps correctly keep the selector in auto when clicked up or down. 2. Internal pitch trim wheel animation reversed. 3. Trim indicators textures on the interior reversed. 4. External rudder trim tweak. 5. Added the correct test for the rear fuel gauge and is working.

Not sure what is going on as the only change was those agn files. Need to check the source files with Holger later next week.

It should be resolved now (for a variety of DD XPlane products), the apt.dat file was not in the various configurations, verify files will resolve this.

Hi all, a new update for SoFly Weather Preset Pro is now available on Orbx Central. Due to the change in how this product is delivered, you will not see an update notification but instead it will show as not being installed. Simply click on the Install button to have 1.3.0 installed. The product previously had a bespoke installer that configured the presets, hence this change in process for this update. New presets: Epic Clouds 1 Epic Clouds 2 Epic High Level Clouds Epic Low Level Clouds Epic Overcast Epic Rolling Clouds Epic Snow Clouds Epic Storm Clouds Epic Ultra High Level Clouds Epic Waves

It’s out now. And also, it’s a public holiday here as well today.

Hi all, we have some updates from FSimStudios that are now available on Orbx Central. CYVR Vancouver 1.2.1 Adding parking positions to CAM9 and CYHC Fixed elevation issues at CAM9 CYXU London 1.2.0 Fixing issues with jetways CYLW Kelowna 1.2.0 Fixing issues with jetways

Hi all, an update for the Aeroplane Heaven P-51 is now available on Orbx Central. Changes 1. Fuel gauge corrections to show correct amount of fuel. 2. Altitude needle maths changed to correctly indicate 10000 , 1000 , 100 ft increments. 3. Addition of the missing repaint texture - Factory used 4. Addition of a super chrome restored texture. 5. Settings for the stock Asobo jet fighter bone dome pilot (readme found in the documentation folder). 6. Added the missing page to the manual on the take off procedures. 7. Tweaked the spinner shape. 8. Corrected the bands on "Old crow" spinner.

Hi all, updates to Seafront Simulations Vessels:Core, Global Shipping and Enhanced AI is now available on Orbx Central. Changes: Switched from having Enhanced AI as the prerequisite to the free Vessels Core Library. Enhanced AI will remain standalone and doesn’t need the Vessels Core Library. New wakes in here as well as some minor LOD changes

FTX_EU_NOR_08_CUSTOM.zip Can you extract these into the FTX_EU_NOR_08_CUSTOM/texture folder and see if the issue still persists?

Hi all, an update to FS Academy VFR is now available on Orbx Central. 1.3.0 Changelog -Onscreen objectives -Visible Markers -Trigger enhancements, refinements and additions -Added map for lesson 4 -Intro and Outro cinematics -Instructor now notices excessive bank, pitch etc

Out now

Working on it now

The airport scene is one combined model so therefore not possible to disable/remove them. There are no plans at the moment to make any changes.

Great feedback, thanks. We are looking at how to standardise overall. As you can imagine, we’ve been so used to the airport ICAO as a standard and now with various product types now on offer we need to think of how best to handle and cater for the unknown too.

Hi all, there have a been a few updates for the Grumman F3F-2 with the latest (1.2.0) now available on Orbx Central. 1.2.0 The CTD issue some people are getting should be fixed now. This also cures a frame rate issue that others were getting. Stick issue is corrected. Quickview cameras are edited to match the stock implementation. VR camera has been reset. 1.1.27 Elevator issue on the Gulfhawk variant. Remapped internal canopy structure.

Available to purchase is the LHA(R) America Class Amphibious Assault Ship for Microsoft Flight Simulator. This package contains static, landable objects for the America class ships and is primarily meant as a companion of IndiaFoxtEcho F-35 aircraft for STOVL operation. https://orbxdirect.com/product/indiafoxtecho-lha-america

Hi all, an update has been available for KAWO Arlington for X-Plane by Airfoillabs. Fixes Added Animated and Remotely controlled Airfoillabs Hangar. Compatibility with C172 NG DIGITAL product. Graphically represented 3d navigation patterns for all 5 airports. Toggle Arrows help to locate visually airports and landing spots. Added 2 Gravel Riverbank adventure landing spots with 3D content. Corrected Ortho and Exclusion zones. Compatibility with ORBX - TrueEarth US Washington. Minor fixes.

Ok, for those that purchased on the weekend and that ran into this issue, you can now verify files in Orbx Central to complete the registration/install process. Thanks for your patience!