Dieter Posted September 26, 2013 Share Posted September 26, 2013 I second this request from Carlyle explicitly!I am also affected by this phenomenon. Link to comment Share on other sites More sharing options...
BrunoSilva Posted September 27, 2013 Share Posted September 27, 2013 Hello! For what is worth, I've been drawn to this thread by the exact same reason: Trees in Vagar Beeing Vagar one of my favourite destinations, this is really a spoiler for me I hope that the FTX team can find a quick solution to this. Thank you and keep up the good work. FTXG is still great stuff! Bruno Silva Link to comment Share on other sites More sharing options...
csharpe Posted September 27, 2013 Share Posted September 27, 2013 Has anyone from ORBX installed the grass LC "test" from AVSIM to see what we are seeing? So far, everyone that has contacted me is seeing trees mixed with their grass under FTXG. Thanks, Carlyle Link to comment Share on other sites More sharing options...
iwn Posted September 28, 2013 Share Posted September 28, 2013 I had a flight southward from Eugene, Oregon. PNW and UTX active, no Global, Eugene taxiways were full of houses and trees, runway was fortunately open. I had just installed new libraries, that's all. Link to comment Share on other sites More sharing options...
Jean-Paul Mes Posted September 29, 2013 Share Posted September 29, 2013 Hello! For what is worth, I've been drawn to this thread by the exact same reason: Trees in Vagar Beeing Vagar one of my favourite destinations, this is really a spoiler for me I hope that the FTX team can find a quick solution to this. Thank you and keep up the good work. FTXG is still great stuff! Bruno Silva Holger's workaround solved my issues for the Faroes addon (including V.5) : In the meantime you could look for a file named 128b2an1.agn in \Scenery\World\texture; renaming it to .off might be a temporary fix though its effect would be global meaning all locations that use that particular landclass will no longer show autogen. Link to comment Share on other sites More sharing options...
BrunoSilva Posted September 29, 2013 Share Posted September 29, 2013 Holger's workaround solved my issues for the Faroes addon (including V.5) : Thanks Jean-Paul! That did the trick in the Faroes. Now...lets brief again that dreaded LLZ/DME offset approach into RW12 Bruno Silva Link to comment Share on other sites More sharing options...
csharpe Posted October 5, 2013 Share Posted October 5, 2013 These are at MGTK - I have FTXG (and all UTX at the moment ) VPA250, I went back and checked, and indeed, Microsoft forgot to include the airport background/mask for MGTK. Yesterday, I went in and added the background and corrected the placement of the taxiways, runway, and buildings. The updated airport can be found here, and it was designed with UTX in mind: http://library.avsim.net/search.php?SearchTerm=mgtk-mgmm_mundo_maya.zip&CatID=root&Go=Search Best, Carlyle Link to comment Share on other sites More sharing options...
csharpe Posted October 6, 2013 Share Posted October 6, 2013 After reading Holger Sandmann's initial findings shared in his post dated 11 August, I have difficulty accepting his suggestion that the fault behind the issue is that certain addons use non-standard class for their airport grass polygons. Where FTXG has been installed, the 'tree' issue can also be found in certain default FSX airports. See the screenshot below entitled 'CYZD Toronto-Downsview'. CYZD Toronto-Downsview (FTXG+UTX-Canada v1.2+FlightOntario's Ontario Lanclass X (Ontario Custom Farmland Landclass and Ontario Default Landclass) Based on this, I doubt very much that the responsibility should be placed on airport scenery developers who have, as I see it, respected for the most part the FSX's SDK either directly or indirectly through the use of third-party scenery tools. Over the years, I've populated my version of FSX with a good number of both freeware and payware versions of Canadian airports. In the next week or so, I hope to have visited and tested every third-party Canadian airport scenery installed in my version of FSX and report my findings on this forum. I will also randomly pick default airports and include anomalies, if any, in my report. All in the spirit of constructive criticism. Regards, JJ JJ, I just saw your post and loaded CYZD (without FTXG), and this issue appears to be with the default version of CYZD itself. Although the trees can be excluded, I'm still working on a solution to get the grass "airport mask" to appear. If you are interested in this workaround, please let me know. It has since been discovered that the standard "grass" LC in FTXG was changed to a texture that was more like that of a "meadow with trees". Although that is not the cause of the issue with this airport, Holger has brought it to the attention of the developers, and they will be addressing it in a future SP. Best, Carlyle Link to comment Share on other sites More sharing options...
csharpe Posted October 6, 2013 Share Posted October 6, 2013 CYZD Toronto-Downsview (FTXG+UTX-Canada v1.2+FlightOntario's Ontario Lanclass X (Ontario Custom Farmland Landclass and Ontario Default Landclass) Regards, JJ JJ, I just took another look at this, and the problem is somewhere in UTX Canada. You should contact them (I know I will) to address this. Something in UTX is hiding this corner of the airport mask. When UT Canada is disabled, the default airport appears correctly. Best, Carlyle Link to comment Share on other sites More sharing options...
Jean-Jacques Posted October 6, 2013 Share Posted October 6, 2013 Carlyle, Thank you for taking time to provide me with your feedback. I would have never thought of UTX as being behind the issue. I'll follow-up. This is much appreciated. Best regards, JJ Link to comment Share on other sites More sharing options...
csharpe Posted October 6, 2013 Share Posted October 6, 2013 Carlyle, Thank you for taking time to provide me with your feedback. I would have never thought of UTX as being behind the issue. I'll follow-up. This is much appreciated. Best regards, JJ No problem, JJ. More specifically, something in "UT Canada Ground Polygons" is preventing a portion of the airport mask for CYZD to display correctly. When "UT Canada Ground Polygons" is disabled, the airport returns to its correct state. Best, Carlyle Link to comment Share on other sites More sharing options...
Richard Oberwinkler Posted October 8, 2013 Share Posted October 8, 2013 Hi, I have some problem with FTX Global and FlyLogic LSZP Biel-Kappelen airport.... there are some trees which I just can't chop, nevermind what I do..... LSZP Biel-Kappelen with FlyLogic's Switzerland X, and KFP6 (different angle) LSZP Biel-Kappelen with FlyLogic's Switzerland X, and KFP6 I have FlyLogics Switzerland X and all other FlyLogic products related to Switzerland installed, funny enough, all other airports/airstrips are fine only LSZP has this issue. .... even if I turn everything of in the Scenery Library (exept default scenery) this bunch of trees is still there.... even after a reload of the sim.....which tells me its a FTX Global issue, since I dont have any other Global addons installed. Same tree group, with only Default turned on.... I tried to create a exclusion area, different landclass, and even overlayed a photo to the default airport, with only default scenery running, no luck all the trees stay whatever I do..... the exact location of this tree ensamble in FSX is: N47° 5,45' E7° 17,58' so please ORBX.... can you send me a lumberjack? regards Richard Oberwinkler Link to comment Share on other sites More sharing options...
NuvolaBianca Posted October 12, 2013 Share Posted October 12, 2013 hello! I find trees in the CRM Bozeman KBZN ( not the Payware). I'm not sure if the trees was there before the CRM SP2 installation... Bye. Link to comment Share on other sites More sharing options...
Jens Peter Posted October 13, 2013 Share Posted October 13, 2013 Guys, you should check out your scenery configuration (open it via scenery library in FSX) I have just re-installed all my airports + UT Alaska, Europe and Canada and i added them first (lowest priority, highest number) and installed all FTX regions + global on the top. Normally FTX place itself on highest priority, but encountering the "Trees everywhere problem" inn the sim. i realized that FTX had placed itself with lowest priority therefore the problem. What a mess it made in my beautiful little FSX World. Editing the scenery library listing, mooving the UT + Scenery Tech files Down with lower priority than FTX solved the issue completely . Take Care JP Link to comment Share on other sites More sharing options...
Dibidut Posted October 13, 2013 Share Posted October 13, 2013 Hi Jens Peter. Something like this:...? Venlig hilsen Henrik Link to comment Share on other sites More sharing options...
Dieter Posted October 13, 2013 Share Posted October 13, 2013 @JPthe FSX priorities settings you described are correct but don't solve all "trees on runway" completely.According to Carlyle Sharpe there seems to be a small "error"-file in FTX Global. (default "grass" texture seems to show as a "grass+tree" texture.)(Did you try his test file?) BTW, my FTX Global installation was correct, put those folders automatically in a higher priority. Link to comment Share on other sites More sharing options...
csharpe Posted October 13, 2013 Share Posted October 13, 2013 Guys, you should check out your scenery configuration (open it via scenery library in FSX) I have just re-installed all my airports + UT Alaska, Europe and Canada and i added them first (lowest priority, highest number) and installed all FTX regions + global on the top. Normally FTX place itself on highest priority, but encountering the "Trees everywhere problem" inn the sim. i realized that FTX had placed itself with lowest priority therefore the problem. What a mess it made in my beautiful little FSX World. Editing the scenery library listing, mooving the UT + Scenery Tech files Down with lower priority than FTX solved the issue completely . Take Care JP Holger confirmed that there is a texture-swapping issue that is leading to trees at airports in some instances. (There will be an SP fix for that in the future.) That discussion is here http://www.orbxsystems.com/forum/topic/61929-ftx-global-what-is-it-all-about/page-6#entry601242 Best, Carlyle Link to comment Share on other sites More sharing options...
Dibidut Posted October 13, 2013 Share Posted October 13, 2013 My Bozeman.: With a Clean FSX and UTX: With FTX and UTX (without FTX Bozeman, payware): Just for comparing. HS Great Carlyle Link to comment Share on other sites More sharing options...
Dieter Posted October 13, 2013 Share Posted October 13, 2013 @HS Your problem at Bozeman will be solved by this patch: - KBZN_Bozeman_fix.zip Read here (German language) http://www.orbxsystems.com/forum/topic/66093-crm-kbzn-orbx-default-b%C3%A4ume-auf-taxiway/?hl=bozeman Posting #6 Link to comment Share on other sites More sharing options...
Dibidut Posted October 13, 2013 Share Posted October 13, 2013 Thanks so mutch Dieter, havent seen this thread. I have just over to days reinstalled all my ORBx Ftx Airports and Regions and this Fix, i havent seen before (as I recall). Its must be the same for NuvolaBianca i guess. Kind regards Henrik Link to comment Share on other sites More sharing options...
Dibidut Posted October 13, 2013 Share Posted October 13, 2013 OK Dieter. From trees on the Airport(runway etc) to (with the FIX) no trees at all is a improvement, i guess, but what about the Dogs (those pure and nice animals) Anyway for one FTX Flyer/Pilot, Bozeman (payware) is a must. Henrik Link to comment Share on other sites More sharing options...
Wolter van der Spoel Posted October 18, 2013 Share Posted October 18, 2013 in case and just out of interest please have a read and look at this post => http://www.orbxsystems.com/forum/topic/65821-ftxg-freeware-na-airport-pack-kmcd-mackinac-island/?p=607644 Link to comment Share on other sites More sharing options...
Dibidut Posted October 18, 2013 Share Posted October 18, 2013 Tanks Wolter. Henrik Link to comment Share on other sites More sharing options...
GOKBUY Posted October 19, 2013 Share Posted October 19, 2013 Lots of trees at the gates and taxi ways of EGLL The plane crashes everytime during taxiing or push back. You can not reach the runways FTX EU England with all patches installed Link to comment Share on other sites More sharing options...
Fabio Anzalone Posted October 30, 2013 Share Posted October 30, 2013 Report Tree in the runway a Berling Tegel from Aerosoft Link to comment Share on other sites More sharing options...
GOKBUY Posted December 17, 2013 Share Posted December 17, 2013 I thinks i have to re send here. I have many trees on the runways and taxi ways of nearlly all the airports of England Region. All the patches and updates are installed. I have not seen these trees isues on the other regions. Is there any way to sort this trees issue of EU Englands No other addon is installed , only FTX Global and EU England Order #FSS0230903 Link to comment Share on other sites More sharing options...
Holger Sandmann Posted December 17, 2013 Share Posted December 17, 2013 Hi GOKBUY, please start a separate support thread about the issue, with EU England in the title. This thread is meant for individual misplaced trees while your issue sounds like a general installation problem with EU ENG. Cheers, Holger Link to comment Share on other sites More sharing options...
Michael M Posted December 18, 2013 Share Posted December 18, 2013 you have tree's at F70 FTX global Link to comment Share on other sites More sharing options...
GOKBUY Posted December 18, 2013 Share Posted December 18, 2013 Hi GOKBUY, please start a separate support thread about the issue, with EU England in the title. This thread is meant for individual misplaced trees while your issue sounds like a general installation problem with EU ENG. Cheers, Holger Hi Holger Have already done that. No reply yet. Link to comment Share on other sites More sharing options...
rpowers46 Posted January 3, 2014 Share Posted January 3, 2014 I did the patch for Bozeman and reinstalled the CRM.002 patch and I still have trees.I have no other KBZN files installed.FS Genesis mesh is disabled.I just go right thru them but would reaaly like to solve the problem.Thanks for any help.Ron Link to comment Share on other sites More sharing options...
Tim Harris Posted January 3, 2014 Share Posted January 3, 2014 I did the patch for Bozeman and reinstalled the CRM.002 patch and I still have trees.I have no other KBZN files installed.FS Genesis mesh is disabled.I just go right thru them but would reaaly like to solve the problem.Thanks for any help.Ron You'll need to create your own support thread, this is only a thread to report errors, and no support is conducted here (too confusing) Link to comment Share on other sites More sharing options...
rpowers46 Posted January 4, 2014 Share Posted January 4, 2014 I do not have Bozeman payware just FTX CRM.I did the patch for Bozeman and reinstalled the CRM.002 patch and I still have trees.I have no other KBZN files installed.FS Genesis mesh is disabled.I just go right thru them but would reaaly like to solve the problem.Thanks for any help.Ron Link to comment Share on other sites More sharing options...
Tim Harris Posted January 4, 2014 Share Posted January 4, 2014 I do not have Bozeman payware just FTX CRM.I did the patch for Bozeman and reinstalled the CRM.002 patch and I still have trees.I have no other KBZN files installed.FS Genesis mesh is disabled.I just go right thru them but would reaaly like to solve the problem.Thanks for any help.Ron You'll need to create your own support thread, this is only a thread to report errors, and no support is conducted here Closing this thread Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.