johnnycrockett Posted January 23, 2017 Share Posted January 23, 2017 Hi there, I tried a search and couldn't find anything that helped me so apologies for having to post. I have just finished installing NZSI, NZMF & NZQN on a new PC with FTXC3. I have got elevation issues at both NZQN & NZMF (sunken) I have run AEC in Orbx Vector but this hasn't fixed it. I remember from a while back the solution was to run NZSI installer again but wonder if that is still the case with FTXC3? Thanks in advance. Link to comment Share on other sites More sharing options...
Adam Banks Posted January 23, 2017 Share Posted January 23, 2017 That's what I did - quicker than searching through the forums to see if there's another solution (I don't think so). Adam. Link to comment Share on other sites More sharing options...
BernieFlyer Posted January 23, 2017 Share Posted January 23, 2017 I did that as well and all was good. re-installed NZSI then reinstalled Milford and Queeny. All was good. I also had some default textures occurring in other parts of South Island. This fixed those as well. Bernie Link to comment Share on other sites More sharing options...
Adam Banks Posted January 23, 2017 Share Posted January 23, 2017 Great - well done!!! Adam. Link to comment Share on other sites More sharing options...
johnnycrockett Posted January 24, 2017 Author Share Posted January 24, 2017 Hmm was hoping there might be another way. I will try a reinstall of NZMF & NZQN and see how that goes! Link to comment Share on other sites More sharing options...
johnnycrockett Posted January 24, 2017 Author Share Posted January 24, 2017 Feel free to mark this one as solved. Thanks for the help Adam. Link to comment Share on other sites More sharing options...
Rob Ainscough Posted February 13, 2017 Share Posted February 13, 2017 I had the same issue, re-install NZSI, NZQN, and NZMF to correct the issue ... I was never able to discover what caused the issue (which bugs me). https://www.youtube.com/my_videos?o=U Cheers, Rob. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.