Mike Franklin Posted March 9, 2016 Share Posted March 9, 2016 Has Orbx Southampton airport been released with a functioning atis frequency? The real frequency is 113.35 which is too low for fsx to tune. This is my local airport but I am reluctant to buy it without working atis. Link to comment Share on other sites More sharing options...
Nick Cooper Posted March 9, 2016 Share Posted March 9, 2016 Hello Mike, Welcome to the forums. No, there is no ATIS and there is none in the default. However, it is easy to add ATIS using the Airport Design Editor. The available frequencies are in the range 118.000 to 136.975. Link to comment Share on other sites More sharing options...
Mike Franklin Posted May 4, 2018 Author Share Posted May 4, 2018 Thanks for the reply. Not a program I know but I'll check it out. Is it easy to work?Sent from my Moto G (5S) using Tapatalk Link to comment Share on other sites More sharing options...
Scott Harmes Posted May 4, 2018 Share Posted May 4, 2018 Hi Mike, Yes it is fairly easy to work out, especially if you have some knowledge of FSX/P3D files structures, but you can work it out even if you don't. Adding an ATIS frequency should be very simple. Just have a flick through the manual to find the process. If you have any issues, you can get info and support from the developer via FSDeveloper. https://www.fsdeveloper.com/forum/forums/airport-design-editor.95/ Cheers, Link to comment Share on other sites More sharing options...
Mike Franklin Posted May 4, 2018 Author Share Posted May 4, 2018 Thanks. I'll give it a go.Sent from my Moto G (5S) using Tapatalk Link to comment Share on other sites More sharing options...
Mike Franklin Posted May 5, 2018 Author Share Posted May 5, 2018 It worked and wasn't that hard with a bit of manual reading, I'm so pleased. Thanks again for the advice!Sent from my Moto G (5S) using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.