Aussieflyer38
-
Posts
4,689 -
Joined
-
Last visited
-
Days Won
23
Posts posted by Aussieflyer38
-
-
On 5/29/2021 at 8:11 PM, Scott Harmes said:
Hi Don,
If you have one throttle then you need to assign throttle to "Throttle axis". Like this:
If you had two throttles then you can assign them to "Engine 1 throttle axis" and "Engine 2 throttle axis". Like this:
Cheers,
Thanks Scott
-
2
-
-
On 5/29/2021 at 4:24 PM, John Heaton said:
Hi Don
I cant suggest a particular solution to you problem - but it might be a problem of mixing controls - and not sure what you mean
with Thrustmaster stick - and which variety -- and the 2 "Sticks" that I have used in the past have a throttle attached or part thereof.
I have just replaced my set up with Honeycomb controls and have a full set of "Saitek Yoke and 2 throttle sets" - matched together -
and are now sitting in my cupboard taking up space
You are welcome to these for zilch - knowing that you are only 3 years younger than me - and probably as broke
All it would take to solve the problem - is for you to make a trip down the M1 to God's Country and have a visit and a chat -and maybe
compare a few notes on how good we were with our PPLs-and controlled crashes
Hi John, Thanks for the offer, wish I had seen it sooner, I purchased the Honeycomb throttle set up, got fully frustrated with how things were going. Haven't had a chance to do anything as yet, just had a week in the hands of the medics. Your offer to visit would be very nice, however have to put it on hold for the moment until I sort out my health problems.
-
1
-
-
Really great shot Mikee
Don
-
Wonderful set Carlos, love everyone of them.
Don
-
4
-
1
-
-
Hi Scott, just got my rig back from the repair shop, so hence the delay in replying.
I managed to reassign my throttle/mix/prop so they all now work correctly as in full travel etc, only thing now that I can't get sorted, is, before they all worked together whether I'm flying a single engine or twin, now in a twin on the aircraft the they only work on one engine. Once again, never had this problem before. Can you help with this please.
Don
-
That's a great shot Martyn, like it a lot.
Don
-
1
-
-
Excellent shots John, particularly like the past one, climbing out.
Don
-
1
-
1
-
-
great shots Adam. What I like about your shots, is almost impossible to tell them from the real thing
Don
-
1
-
-
Great shots Pete, I think you captured that bleak day perfectly.
Don
-
1
-
-
Hi guys,
Had this problem for quite some time and not been able to fix it - need expert advice. After installing MSFS my controls - Thrustmaster stick/ Saitek throttle module, the Saitek module has taken on a new role of it's own accord. The Thrustmaster stick works fine, the Saitek is hopeless, move the throttle and the aircraft rolls and goes into a dive. Checked everything I know and can't find the problem, contacted LM, they told me to logon, when tried to do that, I was told I didn't have an account. Emailed them with my account details including a confirmation from them with my account details, they said they can't find any record. Beats me as I've had no trouble logging in, in the past updating my LM software, anyway to cut a long story short, they are NO help, so any assistance anyone can give me I'd appreciate it. By the way, the controls work fine in MSFS, I'm assuming that there has been some conflict between P3D and MSFS when I installed MSFS. Thanks
Don
-
On 5/21/2021 at 5:36 PM, John Heaton said:
Ahem !! - itsa -----Hawker TYPHOON----
Oops, so it is
-
Magic shot Iain, rally different.
Don
-
2
-
-
Top shot TTM
Don
-
1
-
-
Great shots Mikee, really like the first one.
Don
-
1
-
-
Nice shots TTM, time permitting, I must cross the pond and pay our NZ neighbours a visit
Don
-
1
-
-
Thanks Rodger, for the poem ands making me laugh
Don
-
1
-
-
Nice pics of a great aircraft. Spitty's have a certain magic.
Don
-
G'day John, thanks for dropping by.
Don
-
1
-
-
17 hours ago, gregmorin said:
Don
Use the default P-38 in P3DV4 it is the Milviz P-38. It has been adjusted for v4. Use the liveries created for the Milviz P-38. Search Avsim and sim outhouse for the liveries.
Greg
Thanks Greg, I tried to download/install their freeware one, didn't work. Thought if I didn't have to pay - bargain
I'll give the P3Dv4 default a go. Thanks again
Don
-
Thanks Pete, it's times like this that you find out how many true friends you have here, and I have a LOT, and when things go wrong, it warms my heart to have all this support. I often feel bad that I don't get to post on the forum as much as I would like to, but unfortunately that also is a health issue. I would hate to think that any of friends here think I have abandoned them due to my absence, that would never happen, it's just life taking it's toll.
Don
-
2
-
-
2 hours ago, John Heaton said:
In fact it flies very well and is one of my warbirds - in V4 and 5 - I use it to do the similar Low level flights
in the valleys of The Lake District and the Blue Mountains as the popular one (?) in North Wales
Nice pics John, looks like I'd better make room in the hanger for a new bird
-
4 hours ago, gregmorin said:
Don
The Milviz P-38 is the stock P-38 in P3DV4. It works in both V4 and V5. No need to purchase it for v4.
Greg
Thanks Greg, better warm up my CC
-
1
-
-
Has any Orbx member have the P38 installed in P3Dv4 and working okay? I found it only listed for v3 but on their forum they say it's in v4. Interested if anyone has it installed and working okay. I saw posts that some of the lights don't work, I'm mainly interested in that it fly's okay in v4. Any comments appreciated.
Thanks
Don
-
Really nice shots of a really lovely place Martyn.
Don
-
1
-
1
-
Conflict of controls P3Dv4/MSFS
in General Discussion
Posted
Thanks Mark, that's where the problem was, thanks for your help. Sorry for the late reply, I have been ill.
Don