cessnap Posted February 16, 2021 Share Posted February 16, 2021 Taxi way A1, access to runway 15 is gravel, not paved. The back apron of 15 is missing, not concrete around the whole area. Concrete along runway 26/8 is missing. See attached file. Link to comment Share on other sites More sharing options...
Jon Clarke Posted February 16, 2021 Share Posted February 16, 2021 Welcome to the forums. I have asked the Dev to look at it. Link to comment Share on other sites More sharing options...
Matteo Veneziani Posted February 17, 2021 Share Posted February 17, 2021 Hi, that is not normal. Please may you post an image of the problem so i can understand better? thanks regards Link to comment Share on other sites More sharing options...
cessnap Posted February 22, 2021 Author Share Posted February 22, 2021 Sorry for the delay, here's runway 26 Link to comment Share on other sites More sharing options...
Jon Clarke Posted February 23, 2021 Share Posted February 23, 2021 I have informed Matteo of your response. Hopefully he will take a look and respond shortly. Link to comment Share on other sites More sharing options...
Matteo Veneziani Posted February 23, 2021 Share Posted February 23, 2021 Sorry but this is a misunderstanding, there is no Orbx Kbur scenery available right now. This is not Kbur Orbx scenery. regards Link to comment Share on other sites More sharing options...
cessnap Posted February 23, 2021 Author Share Posted February 23, 2021 My fault, I thought this was part of the overall scenery file. Boy, Orbx is the best out there, hope you are talking directly to x-plane. Link to comment Share on other sites More sharing options...
cessnap Posted February 23, 2021 Author Share Posted February 23, 2021 Just a question, if x-plane controls the runways and scenery at airports, how far toward the airports do Orbx control? It would be helpful to document this to realize how to add on scenery appropriately, if not available from Orbx. Link to comment Share on other sites More sharing options...
niftyneato Posted March 4, 2021 Share Posted March 4, 2021 I've run into this problem as well and did a little digging. While Orbx has not yet released a custom version of KBUR, it is present in the Orbx_A_US_SoCal_Airports library, and it is indeed missing the asphalt as described in the original post. I verified that the problem goes away by disabling the Orbx_A_US_SoCal_Airports after which the missing taxiways reappeared from the default x-plane version of the airport. As a work-around, I used World Editor to create a KBUR scenery, imported KBUR from the gateway, exported it, and updated scenery_packs.ini to make sure my version loads before Orbx_A_US_SoCal_Airports. Hope this helps. Link to comment Share on other sites More sharing options...
Jon Clarke Posted March 4, 2021 Share Posted March 4, 2021 Thanks for your info. It may well help others who have an issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.