bbking Posted December 26, 2020 Share Posted December 26, 2020 Hello there, I just installed TE Canary Islands, but something is not right. It seems that i miss some files. Can you have a look @ my log file and ini file? Thanks!! Kind regards, Bouwe Log.txt scenery_packs.txt Link to comment Share on other sites More sharing options...
CFG278 Posted December 26, 2020 Share Posted December 26, 2020 In the port of Puerto del Rosario (Fuerteventura) there is an image of a cruise ship on the Ortho photo and on it the object of a frigate or something like that. I would have expected that such obvious optical errors - because it's near the airport GCFV - would be fixed before release. Best regards, Gerson Nerger Link to comment Share on other sites More sharing options...
bloggo Posted December 26, 2020 Share Posted December 26, 2020 When I try to display GCLA airport it always displays the default airport. I have checked that no other GCLA airports are in the Custom Scenery folder and have re-installed the package. The package was installed through X-Organiser. Can someone advise what else to check or is this a bug? Link to comment Share on other sites More sharing options...
tommy2010 Posted December 26, 2020 Share Posted December 26, 2020 I am getting the same Link to comment Share on other sites More sharing options...
bloggo Posted December 26, 2020 Share Posted December 26, 2020 Looks like a bug then! Link to comment Share on other sites More sharing options...
BobbieH Posted December 26, 2020 Share Posted December 26, 2020 Open the scenery packs ini file and place this line SCENERY_PACK Custom Scenery/Orbx_A_GCLA_LaPalma/ above this line SCENERY_PACK Custom Scenery/Orbx_A_EU_Spain_Canaries_TE_Airports/ It should look like this SCENERY_PACK Custom Scenery/Orbx_A_GCLA_LaPalma/ SCENERY_PACK Custom Scenery/Orbx_A_EU_Spain_Canaries_TE_Airports/ Save the ini file and you should then see the correct building for the airport. Not being an expert I can only assume that something in the Orbx_A_EU_Spain_Canaries_TE_Airports/ overwrites the airport if the airport is below the Orbx_A_EU_Spain_Canaries_TE_Airports/ in the ini file. Link to comment Share on other sites More sharing options...
bloggo Posted December 26, 2020 Share Posted December 26, 2020 Thanks BobbieH I will try that shortly. Link to comment Share on other sites More sharing options...
tommy2010 Posted December 26, 2020 Share Posted December 26, 2020 It looks like Xorganiser gets it wrong. I have reinstalled true earth canaries loaded it up without Xorganiser and i worked fine. Then to test i opened x organiser and it reverted it back to default Link to comment Share on other sites More sharing options...
BobbieH Posted December 26, 2020 Share Posted December 26, 2020 Xorganiser can be a little bit hit and miss at times that's for sure. As long as the airport itself is above the TE_Airports it should be fine. Both the airport folder and the TE_Airport folder share one thing in common, they both have this file +28-018.dsf. I'm guessing that if the TE_Airports loads after the actual airport it's that dsf file that then shows the default airport. Link to comment Share on other sites More sharing options...
tommy2010 Posted December 26, 2020 Share Posted December 26, 2020 Im just trying to find a way to tell x organiser where to put and leave it there. As i dont want to have the move it around everytime i launch Xorganiser Link to comment Share on other sites More sharing options...
bloggo Posted December 26, 2020 Share Posted December 26, 2020 Sorted, thanks BobbieH and tommy2010 if you find out how to stop xorganiser I would appreciate the answer. Link to comment Share on other sites More sharing options...
bbking Posted December 26, 2020 Author Share Posted December 26, 2020 Forget my first post...I am still missing something: 0:00:40.904 I/SCN: DSF load time: 10072 for file Custom Scenery/Orbx_A_EU_Spain_Canaries_TE_Custom/Earth nav data/+20-020/+27-019.dsf (0 tris, 0 skipped for 0.0 m^2) 0:00:40.904 I/DSF: Warning for missing scenery file: +29-017 0:00:40.904 I/DSF: Warning for missing scenery file: +29-019 0:00:40.904 I/DSF: Warning for missing scenery file: +29-018 0:00:40.904 I/DSF: Warning for missing scenery file: +29-016 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank Greetz, Bouwe Log.txt scenery_packs.ini Link to comment Share on other sites More sharing options...
tommy2010 Posted December 26, 2020 Share Posted December 26, 2020 16 minutes ago, bloggo said: Sorted, thanks BobbieH and tommy2010 if you find out how to stop xorganiser I would appreciate the answer. I believe i have fixed it. In your custom scenery folder you will see where the Orbx cararies is it will have letters A-B-C so on. Because GCLA is A with another, it needs the GCLA needs to be A on its own and the others B-C-D. Basicly move the others down one letter as the picture shows Link to comment Share on other sites More sharing options...
BobbieH Posted December 26, 2020 Share Posted December 26, 2020 You just beat me to it tommy2010. I had done exactly the same thing. Although I did find that renaming the folder Orbx_A_GCLA_LaPalma to Orbx_A_AGCLA_LaPalma had the same result. Either way will make Xorgansier arrange the ini file correctly and X-Plane to load the airport after the TE_Airports. Link to comment Share on other sites More sharing options...
bloggo Posted December 26, 2020 Share Posted December 26, 2020 Thank you both I will try it out! Link to comment Share on other sites More sharing options...
tommy2010 Posted December 26, 2020 Share Posted December 26, 2020 I am getting really bad sea textures though. The squares really stand out. Hopefully thats not related Link to comment Share on other sites More sharing options...
bbking Posted December 26, 2020 Author Share Posted December 26, 2020 2 hours ago, bbking said: Forget my first post...I am still missing something: 0:00:40.904 I/SCN: DSF load time: 10072 for file Custom Scenery/Orbx_A_EU_Spain_Canaries_TE_Custom/Earth nav data/+20-020/+27-019.dsf (0 tris, 0 skipped for 0.0 m^2) 0:00:40.904 I/DSF: Warning for missing scenery file: +29-017 0:00:40.904 I/DSF: Warning for missing scenery file: +29-019 0:00:40.904 I/DSF: Warning for missing scenery file: +29-018 0:00:40.904 I/DSF: Warning for missing scenery file: +29-016 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank 0:00:40.904 W/SCN: Missing object lib_s/trains/F_18.31.obj from package Custom Scenery/Orbx_B_EU_Spain_Canaries_TE_Overlay/roads/; replacing with blank Greetz, Bouwe Log.txt 111.08 kB · 0 downloads scenery_packs.ini 10.09 kB · 2 downloads I searched here on the Orbx forums and missing object from package is normal. Also i get a warning for missing scenery file ( now region TNCM) so i am going to ignore them as well. Everything looks normal. My case is closed! regards. Link to comment Share on other sites More sharing options...
BobbieH Posted December 26, 2020 Share Posted December 26, 2020 Do you use any water enhancement lua scripts or anything else that changes the default water in X-Plane tommy2010 ? I have also seen that issue when using ortho tiles in some cases. I'm not seeing anything like that at all here after changing the folder names. Link to comment Share on other sites More sharing options...
tommy2010 Posted December 26, 2020 Share Posted December 26, 2020 The only one i have is Vivid Water Link to comment Share on other sites More sharing options...
gigabenga Posted December 26, 2020 Share Posted December 26, 2020 UWXP problem with this effect Link to comment Share on other sites More sharing options...
BobbieH Posted December 26, 2020 Share Posted December 26, 2020 https://forums.x-plane.org/index.php?/forums/topic/218827-uwxp-v261-blocky-water/ Link to comment Share on other sites More sharing options...
gigabenga Posted December 26, 2020 Share Posted December 26, 2020 10 minutes ago, BobbieH said: https://forums.x-plane.org/index.php?/forums/topic/218827-uwxp-v261-blocky-water/ And further? The one who can read is in advantage Link to comment Share on other sites More sharing options...
gigabenga Posted December 26, 2020 Share Posted December 26, 2020 Vor 7 Stunden sagte CFG278: Im Hafen von Puerto del Rosario (Fuerteventura) befindet sich auf dem Ortho-Foto ein Bild eines Kreuzfahrtschiffes und darauf das Objekt einer Fregatte oder ähnliches. Ich hätte erwartet, dass solche offensichtlichen optischen Fehler - weil sie sich in der Nähe des Flughafens GCFV befinden - vor der Veröffentlichung behoben werden. Freundliche Grüße, Gerson Nerger But you must have very serious problems if you accuse the developer of such little things. Incredible Link to comment Share on other sites More sharing options...
CFG278 Posted December 26, 2020 Share Posted December 26, 2020 12 minutes ago, gigabenga said: But you must have very serious problems if you accuse the developer of such little things. Incredible Boy, don't get personal. If I want Ortho photos with cruise ships on it, I create a scenery of the Canary Islands myself with Ortho4XP. What I have described is not worthy of a provider of high quality scenery. Link to comment Share on other sites More sharing options...
gigabenga Posted December 26, 2020 Share Posted December 26, 2020 2 minutes ago, CFG278 said: Boy, don't get personal. If I want Ortho photos with cruise ships, I create a scenery of the Canary Islands myself with Ortho4XP. What I have described is not worthy of a provider of high quality scenery. I have everything that Orbx has shown beautiful landscapes and ships. If you can't install, that's not the developer's problem. Or build your own orthophotos as you have already said. And is good Link to comment Share on other sites More sharing options...
CFG278 Posted December 26, 2020 Share Posted December 26, 2020 18 minutes ago, gigabenga said: I have everything that Orbx has shown beautiful landscapes and ships. If you can't install, that's not the developer's problem. Or build your own orthophotos as you have already said. And is good Do you understand what I wrote? At no point did I write that I couldn't install the scenery. Link to comment Share on other sites More sharing options...
gigabenga Posted December 26, 2020 Share Posted December 26, 2020 LPMA from Orbx not shown in Xplane correct install correct Custom Scenery. Link to comment Share on other sites More sharing options...
Tim/Rodeo314 Posted December 27, 2020 Share Posted December 27, 2020 1 hour ago, gigabenga said: LPMA from Orbx not shown in Xplane correct install correct Custom Scenery. There is no Orbx LPMA for X-Plane. Link to comment Share on other sites More sharing options...
gigabenga Posted December 27, 2020 Share Posted December 27, 2020 4 hours ago, Tim/Rodeo314 said: There is no Orbx LPMA for X-Plane. Thanks i mean GCLA Link to comment Share on other sites More sharing options...
Jon Clarke Posted December 27, 2020 Share Posted December 27, 2020 X-Organiser does not work well with Orbx addons. Orbx Central will install the addons as they are supposed to be installed, but unfortunately X-Organiser then overrides the placements. @gigabenga Regarding GCLA, please post your scenery_packs.ini. 6 hours ago, gigabenga said: LPMA from Orbx not shown in Xplane correct install correct Custom Scenery. Regarding GCLA, please post your scenery_packs.ini. Link to comment Share on other sites More sharing options...
bloggo Posted December 27, 2020 Share Posted December 27, 2020 7 hours ago, gigabenga said: Thanks i mean GCLA Read the start of this thread for the answer! Link to comment Share on other sites More sharing options...
Jon Clarke Posted December 27, 2020 Share Posted December 27, 2020 scenery_packs.ini change if you have altered any addon installations, hence my request for the latest one. Looing at the one you submitted in your initial post, it is all incorrectly layered as far as the Orbx addons are concerned. I have corrected them for you in the attached replacement scenery_packs.ini. Be aware that if you are using X-organiswer it may well rearrange the Orbx addon layering . I suggest keeping a copy spare of the attached version. scenery_packs.txt Link to comment Share on other sites More sharing options...
bbking Posted December 28, 2020 Author Share Posted December 28, 2020 Thanks Jon! I have corrected my ini file. I let you know if i get a "error free "log file. Kind regards, Bouwe Link to comment Share on other sites More sharing options...
Jon Clarke Posted December 28, 2020 Share Posted December 28, 2020 Please only pay attention to an On Screen error message. The log file may show some Unable to Find messages but unless they appear On Screen, you can normally ignore them. Link to comment Share on other sites More sharing options...
bbking Posted December 28, 2020 Author Share Posted December 28, 2020 Just checked the log file. The previous errors i got are now gone! Finally a goed ini file. And yes in the past i used Xorganizer but this programme ruined my ini file creating a log file full of errors....pfff. Thanks again Jon for your support!!! Link to comment Share on other sites More sharing options...
Jon Clarke Posted December 28, 2020 Share Posted December 28, 2020 Good news Link to comment Share on other sites More sharing options...
Lexen Posted January 4, 2021 Share Posted January 4, 2021 hello,first of all a new year I wish all. I have read through this thread here and come to no satisfactory result. with me to see that the mountains are cut off, the bridge for cars is not at all to see. I am also at the end of my thoughts about what else it could be. sorry for my bad english A.Lex scenery_packs.ini Log.txt Link to comment Share on other sites More sharing options...
Jon Clarke Posted January 4, 2021 Share Posted January 4, 2021 @Lexen Please make a new post as this topic was resolved. @Nick Cooper please split this. Thanks Lexen, are you using an "organiser" programme because TE Canaries is not installed correctly? Link to comment Share on other sites More sharing options...
Jon Clarke Posted January 4, 2021 Share Posted January 4, 2021 I have corrected your scenery_packs.ini. Also make sure you have "Runways follow terrain contours" enabled in your XP Settings/General scenery_packs.ini Link to comment Share on other sites More sharing options...
Lexen Posted January 4, 2021 Share Posted January 4, 2021 hi Jon, I am amazed that this works perfectly, and yes you are right, because I had disabled "Runways follow terrain contours" the other day, I had totally forgotten. yes I used xOrganizer,but I had renamed and moved the 5 Orbx files to A / B / C / D as above. I thank you very much for your help. greetz A.Lex Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.