HAL34 Posted October 27, 2019 Share Posted October 27, 2019 Hello, I bought your London City airport and TrueEarth South GB. First everithing was working good. But now, the 30 St Mary Axe, the Tower Bridge, the Ferris Wheel and other things didappeard, buildings are replaced by others nd the general quality decreased. See attached file. >> Can you tell me why? >> And what I have to do? Thank you for your help. Link to comment Share on other sites More sharing options...
Nick Cooper Posted October 27, 2019 Share Posted October 27, 2019 Hello, unless London Landmarks are above the product in the ini file, you will not see them, as indeed you are not seeing them. They are X Plane 11 objects and not a part of the Orbx product. Link to comment Share on other sites More sharing options...
HAL34 Posted October 28, 2019 Author Share Posted October 28, 2019 Hello Nick, Thank you for your answer. It seems that London Landmarks is in good position. Could you tell me if you see any problem in the following ini file? Thanks again. Link to comment Share on other sites More sharing options...
Jon Clarke Posted October 28, 2019 Share Posted October 28, 2019 @HAL34 Can you attach your scenery_packs.ini because I don't see any reference to TEGB South being installed in the pic you have attached. Link to comment Share on other sites More sharing options...
HAL34 Posted October 28, 2019 Author Share Posted October 28, 2019 OK Jon. Here is the ini FIle. An also a screenshot of the Custom Scenery folder. Do you remark some problems in the ini file? If you compare, you'll see that he scenery_packs.ini file does not include all of the seneries listed in the Custom Scenery Folder. Do you know why? Do you know what I can do? I explained this problem here:https://forums.x-plane.org/index.php?/forums/topic/193622-problems-with-the-scenery_packini-file/ Everithing was working (TrueErth GB South, London City, etc.) before this problem. scenery_packs.ini.bak Link to comment Share on other sites More sharing options...
Jon Clarke Posted October 28, 2019 Share Posted October 28, 2019 I cannot open the attached file. It is also the backup one not the active one. Looking at your pic your scenery_packs.ini is all messed up. I need you to attach the active scenery pack please. Link to comment Share on other sites More sharing options...
HAL34 Posted October 28, 2019 Author Share Posted October 28, 2019 Good evening Jon, Here is the good scenery_packs.ini, just renewed by XP, in alphabetic order. I still have to arrange it (tomorrow). I have now a new problem in London City: planes on each other (see attached file). My scenery_packs ini 28.10.19 21h.docx Link to comment Share on other sites More sharing options...
Jon Clarke Posted October 29, 2019 Share Posted October 29, 2019 The planes are on top of each other because you are running a Traffic programme and still have static planes activated. You need to open Orbx Central and click on EGLC and scroll down the page until you see Options. Click on Configure and then click on the No static aircraft, as in the pics below. You have to attach your scenery_packs.ini I have looked at the pic of it you attached and it is all wrong. I cannot understand why you cannot attach a copy of it. It should be in the Custom Scenery folder and labelled as scenery_packs.ini, no other fancy name like orbx backup or .bak etc. See my pic below from my Custom Scenery folder. It clearly shows a scenery_packs.ini along with a backup by orbx. I want the one I have highlighted please. If you attach (NOT a pic) the correct one I can help you otherwise I can't. Link to comment Share on other sites More sharing options...
HAL34 Posted October 29, 2019 Author Share Posted October 29, 2019 Hello Jon. All my problems with the London City airport have been solved by a good order in my scenery_packs.ini file. It's a great pleasure. Thank you again for your attention. Link to comment Share on other sites More sharing options...
HAL34 Posted October 29, 2019 Author Share Posted October 29, 2019 Thank you for your information about the possibility to configure London. As I still have problems, but not with the Orbx software (Courchevel, Meigs Field and others), I give you my scenery_packs.ini file. For example: - The boats disappeared in Gibraltar. - The Chicago O’Hare airport I bought was working well but doesn’t anymore. Even the default one doesn’t appear, covered by grass (attached file): - Photos of a bad place under the airport of Warsaw that I bought last week: - Mixed aircrafts taking off together: - Planes at bad places in Dubai (some of them too far on the left, some too close on the right): Below, you'll find my scenery_packs.ini Thank you. scenery_packs.ini Link to comment Share on other sites More sharing options...
HAL34 Posted October 29, 2019 Author Share Posted October 29, 2019 I did purchase Dubai as a payware Airport, without static aircrafts.But I tried now and discover that those aircrafts are the ones of X-Life. Link to comment Share on other sites More sharing options...
Jon Clarke Posted October 29, 2019 Share Posted October 29, 2019 Regarding the function and display of Orbx addons in your XP installation, your scenery_packs.ini shows that they are working well. I cannot comment on all the other 3rd party addons. I have adjusted a couple of entries. As this is an Orbx products support forum, I have ensured that your Orbx addons are layered and working correctly. scenery_packs.ini Link to comment Share on other sites More sharing options...
HAL34 Posted October 29, 2019 Author Share Posted October 29, 2019 And I am very happy with your help. Cardiff and LOWI and ENOV and the others works well also. Thanks to Orbx! Link to comment Share on other sites More sharing options...
HAL34 Posted October 31, 2019 Author Share Posted October 31, 2019 Hello Jon, I solved the issue with the help of Sentry. The problem of my O'Hare Airport (desappearing under the grass) seems to come from the Orbx Meigs Field because it's area is maybe so big that it covers the O'Hare area. I solved the problem by puting the O'Hare scenery upon the Meigs scenery. What do you think? Link to comment Share on other sites More sharing options...
HAL34 Posted October 31, 2019 Author Share Posted October 31, 2019 I have one question about ENOV, I don’t have problems with this scenery. This Orbx product (a nice one) was directly installed by the Orbx Central software, without any help from me. So I trust this installation. But I launched a research (requesting “ENOV” in the Custom scenery folder). I found three folders, including one folder-shortcut (see attached screenshot). Their relations seems logical. What do you think? Link to comment Share on other sites More sharing options...
Jon Clarke Posted October 31, 2019 Share Posted October 31, 2019 It's fine. Link to comment Share on other sites More sharing options...
HAL34 Posted October 31, 2019 Author Share Posted October 31, 2019 Good evening Jon. Do you mean that my ENOV folders are fine like this? Link to comment Share on other sites More sharing options...
Jon Clarke Posted November 1, 2019 Share Posted November 1, 2019 7 hours ago, HAL34 said: Good evening Jon. Do you mean that my ENOV folders are fine like this? I have just uninstalled and reinstalled Orbx ENOV. I have one folder which looks like the pic. I don't have an ENOV Mesh folder. I suggest you just let the installer do it's work and if the scenery is not working then ask for XP support. Where did the z-ENOV Mesh XP11 file come from? Link to comment Share on other sites More sharing options...
HAL34 Posted November 1, 2019 Author Share Posted November 1, 2019 Hello Jon, Everything that I have about ENOV came from the install of Orbx Central. Link to comment Share on other sites More sharing options...
Jon Clarke Posted November 1, 2019 Share Posted November 1, 2019 @Nick Cooper Nick would you oblige and tell me if you have z-ENOV Mesh file? I certainly don't and I have uninstalled, reinstalled, verified files etc. Our friend seems to clearly have a mesh file. Link to comment Share on other sites More sharing options...
Nick Cooper Posted November 1, 2019 Share Posted November 1, 2019 Hello Jon, no I don't have that at all. Link to comment Share on other sites More sharing options...
HAL34 Posted November 1, 2019 Author Share Posted November 1, 2019 But no problem, it works well. And thank you to you both. And to Orbx! Waiting for your California, hoping it works on X-Plane. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.