FSMontie Posted May 3, 2018 Share Posted May 3, 2018 I recently decided to get back into flight simming and was greeted by this broken landclass. Screenshots for Pacific Fjords and Central Rocky's. How do I fix this? Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted May 4, 2018 Share Posted May 4, 2018 Hi, First please, lets start with the basics, Ensure the Orbx Libs are installed and up to date. (is there a blue notification above the settings button in FTXC3?) Ensure all of your 3rd party addons are at the top of your scenery library and above your FTX entries. Then in FTX Central 3 Insertion points, move "FTX entries should be inserted below" just below your last 3rd party addon. Then move the "openLC entries should be inserted below" just below your FTX entries. and click "Save". Then run the "Force Migration" option. Finally Click on the "Clear Temp" button. Then, if you have Vector installed, there is a Vector control panel access button at the bottom of the FTXC3 settings page. When you open it you can select the amount of road coverage etc, be sure to uncheck the "Frozen Surface (in winter only)"option, and check the Australia Add-Ons under the “Settings” tab, then go to the Airport Elevation Correction (AEC tool) tab and run the auto configuration process and be sure to click on "Appy" when it is done scanning. Cheers Doug Link to comment Share on other sites More sharing options...
FSMontie Posted May 5, 2018 Author Share Posted May 5, 2018 Did all that and its still the same... Link to comment Share on other sites More sharing options...
Scott Harmes Posted May 5, 2018 Share Posted May 5, 2018 Hi, It could possibly be a corrupted terrain.cfg file. See the following thread for advice on what to do: Cheers, Link to comment Share on other sites More sharing options...
FSMontie Posted May 6, 2018 Author Share Posted May 6, 2018 Tried it, unfortunately the problem persists. Link to comment Share on other sites More sharing options...
Scott Harmes Posted May 6, 2018 Share Posted May 6, 2018 You will probably need to do a fresh installation of your simulator and then install the sceneries again. Cheers, Link to comment Share on other sites More sharing options...
FSMontie Posted May 6, 2018 Author Share Posted May 6, 2018 Decided to reinstall P3D as everything else failed. Working now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.