Orbxtreme Posted August 27, 2015 Share Posted August 27, 2015 Hi, it would be nice if you could correct few issues with the area near Quebec City. You can see that the ferry is floating in the water on the north side of the seaway But since OLC, the ferry on the south side of the seaway is now beached. A little cut in the ground there would make this ferry available for tourists again The rest of the south shore, close to the ferry, is OK, since Euronav and St-Romuald installations fit perfectly, as before Close to the two main bridges, Quebec Bridge and Pierre-Laporte bridge, for a reason I ignore, the water is now rising vertically along both shores, which makes the bases of the bridges covered with water. As you can see here: The other point is that you carefully designed the power lines on Île d'Orléans, the major island just east of Quebec City. At about the middle of the island, you drew all the major transmission poles (in red) and you also designed the poles receiving the wires on the south shore, across the island. This is a major power line, but there are no wires over the seaway. And this is normally an obstacle that huge boats have to deal with. Maybe you could add few wires, otherwise I will have to draw them on my screen. Many thanks Link to comment Share on other sites More sharing options...
Holger Sandmann Posted August 27, 2015 Share Posted August 27, 2015 Hi Francois, moved here to the Vector subforum as shorelines and powerlines are not placed or altered by openLC NA. Cheers, Holger Link to comment Share on other sites More sharing options...
StefanSchaefer Posted December 23, 2015 Share Posted December 23, 2015 I need exact coordinates for the ferry position please, in order to be able to check if coastlines are correct or not. This could be anywhere. Thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.