Dieter Posted April 15, 2014 Share Posted April 15, 2014 I have successfully installed NCA and latest library. I experienced some texture problems in certain areas. Please see my attached screenshots.When flying over these areas the textures are slowly and permanently changing.Screenshots are taken in Yosemite area heading to KMMH.I don't know if it was like this before installing latest library.Pic00 at KMMHcoordinatesN37° 37.10'W118° 49.66'Pic 02 (should be a lake)N37° 43.33'W119° 10.85'Pic 03 (should be a lake)N37° 42.89'W119° 22.32'Pic04 (should be a lake)N37° 44.31'W119° 24.42' Link to comment Share on other sites More sharing options...
Kasi31 Posted April 15, 2014 Share Posted April 15, 2014 Hello Dieter, you may have a look here: http://www.orbxsystems.com/forum/topic/74183-texture-bleed-thru-at-kmmh-and-surounding-areas/ Link to comment Share on other sites More sharing options...
retep49 Posted April 15, 2014 Share Posted April 15, 2014 Hello Dieter, here are a few shots I have made from the same area, and I don't see any strange textures. Peter Link to comment Share on other sites More sharing options...
Dieter Posted April 15, 2014 Author Share Posted April 15, 2014 Well, quite funny! Forgot to write, my installation is in FSX. I don't have any additional scenery in this area which might cause this error. Link to comment Share on other sites More sharing options...
Dieter Posted April 15, 2014 Author Share Posted April 15, 2014 Oh, well, Kasi, missed your input. Will check that and report back. Link to comment Share on other sites More sharing options...
Dieter Posted April 15, 2014 Author Share Posted April 15, 2014 Problem solved! Thanks for your information. Reason for bad texturing was a wrong position of ORBX!OPENLC_NAMERICA1 and ORBX!OPENLC_BASE. Link to comment Share on other sites More sharing options...
Brito Posted April 15, 2014 Share Posted April 15, 2014 I liked how the issue was handled mainly by feedback topic starter. This is the right way, by being more informative and serves everyone. Thanks to all involved Cheers, Link to comment Share on other sites More sharing options...
Kasi31 Posted April 15, 2014 Share Posted April 15, 2014 Problem solved! Thanks for your information. Reason for bad texturing was a wrong position of ORBX!OPENLC_NAMERICA1 and ORBX!OPENLC_BASE. You`re welcome! I had the same problem a couple of weeks ago. Link to comment Share on other sites More sharing options...
Heronjr Posted April 15, 2014 Share Posted April 15, 2014 Dieter, Excuse me, but how come those ORBX!OPENLC_NAMERICA1 and ORBX!OPENLC_BASE ended in a wrong place. Shouldn't FTX Central order the Library entries position? Thanks and regards, Link to comment Share on other sites More sharing options...
Dieter Posted April 15, 2014 Author Share Posted April 15, 2014 I thought I had positioned them correctly, maybe after FTXGlobal update 1.2 the sequence was changed? But I don't know! Yes, all FTX regions/airports are sorted correctly during installation. But it must be different with the Orbx!OPENLC_xxx stuff . These ones had to be be placed in a priority lower than all other ORBX sceneries. (FTX Global manual, page 14) So this time I cross-checked library and my insertion points to avoid an error again after switching between regions (Hybrod/Oceania/NorthAmerica) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.