dental12 Posted August 4, 2013 Share Posted August 4, 2013 After I just installed ftx global, the airport terminal buildings for most of the airports disappeared.I stilln see the gates and planes. Please help thx lee Link to comment Share on other sites More sharing options...
Tim Harris Posted August 5, 2013 Share Posted August 5, 2013 Hello, For payware support, you'll need to include your purchase order number, more info here on doing that http://www.orbxsystems.com/forum/topic/1157-important-notice-please-add-your-order-to-your-sig-for-support/ Link to comment Share on other sites More sharing options...
lthendrix Posted August 9, 2013 Share Posted August 9, 2013 I am having this issue as well Link to comment Share on other sites More sharing options...
Wolter van der Spoel Posted August 9, 2013 Share Posted August 9, 2013 could you please post up some screenies so we can see what's the issue ? In case of you don't know how to post screenshots on our forums please have a look and a read here => http://www.orbxsystems.com/forum/topic/38447-how-to-post-a-screenshot-on-the-orbx-forums/ Thank you in advance Link to comment Share on other sites More sharing options...
Nick Cooper Posted August 9, 2013 Share Posted August 9, 2013 Hmm, how to post a screenshot of something that is not there. Perhaps you can offer some guidance On a more serious note, I believe that there is more autogen displayed by FTX Global than by default scenery. At least, it looks that way on my screen. I wonder what your autogen density setting is. From other fora, it seems that at the one extreme, setting autogen to none will prevent airport buildings from appearing and at the other, setting autogen to extremely dense may overload the ability of FSX to display all the requested objects, resulting again in missing airport buildings. If you haven't already, try setting autogen to the middle, normal and see if they re-appear. Regards, Nick Link to comment Share on other sites More sharing options...
lthendrix Posted August 9, 2013 Share Posted August 9, 2013 I am guilty of having autogen to zero on these flights as most of my time is spent high enough to not need it and I get a performance gain in my f1 mustang . I will do my due diligence on this one ............ and I flew into mexico city tonight and did not experience it... I have a feeling it does probly have to do with the autogen setting. Link to comment Share on other sites More sharing options...
Wolter van der Spoel Posted August 10, 2013 Share Posted August 10, 2013 test is very simple, go to airport KSEA, save the flight. set autogen slider to the right load saved flight, if you're not seeing any buildings then there is something wrong with your install see attached screenshot Link to comment Share on other sites More sharing options...
lthendrix Posted August 12, 2013 Share Posted August 12, 2013 Hi Wolter. I tested this and what I found is that with autogen off when panning inside the cockpit the buildings appear and then disappear when the view direction is changed and they should still be in the frame . However, when autogen is switched to sparse or above the building do not disappear. so there is my solution Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.