BernieFlyer Posted December 4, 2020 Share Posted December 4, 2020 I have reported this quite some time back but it is still happening. I tick the Enhanced APX in the Configure window and Save. Even if I come straight back to the Configure window it is no longer ticked. Bernie Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 4, 2020 Share Posted December 4, 2020 Hello, typically this is because there are both versions of a file that needs to be renamed present. I don't seem to have a control panel that looks like that at all. Link to comment Share on other sites More sharing options...
BernieFlyer Posted December 5, 2020 Author Share Posted December 5, 2020 Hi Nick, could you elaborate please. I don't know what file(s) you mean. Thanks Bernie Link to comment Share on other sites More sharing options...
BernieFlyer Posted December 5, 2020 Author Share Posted December 5, 2020 I tried uninstalling/re-installing the AI package and in Configure lost the Default AI option, Fly Tampa option and the Enhanced ATC option (with no scrolling available). You posted a download file last year which I placed in Orbx scripts (orbx_cpl_ftxauai) and that gets the full options showing and allows scrolling but none of the options stay ticked other than the Orbx on/off options which work correctly when I start Configure again. I have UTLive (which I have set to zero traffic when running in Australia and New Zealand and used only when flying outside ANZ) which only seems to work when I have Default AI ticked so not working and Fly Tampa Sydney which runs fine though I don't know if the Enhanced APX is working or not. I checked the Fly Tampa Sydney Scenery Folder and have the adex_yssy_gl_2020.bgl file but no ftx_ai_adex_yssy_gl_2015.bgl file. The "off" versions are not there. Thanks Bernie Link to comment Share on other sites More sharing options...
BernieFlyer Posted December 5, 2020 Author Share Posted December 5, 2020 Just a further to above. I checked Scenery\World\Scenery and the default traffic file is still disabled by Orbx even when I tick it to be active and the Orbx Intl traffic is correctly disabled. So these options outside of the Orbx options (which do not appear after the re-install of AI Traffic Australia and New Zealand) appear not to work at all. Bernie Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 5, 2020 Share Posted December 5, 2020 Hello, it may well be that this old control panel is now outdated. orbx_cpl_ftxauai.xml Link to comment Share on other sites More sharing options...
BernieFlyer Posted December 6, 2020 Author Share Posted December 6, 2020 I tried that file. No change. Still missing ftx_ai_adex_yssy_gl_2015.bgl and non of the options except turning on and off the Orbx AI work. Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 6, 2020 Share Posted December 6, 2020 Hello, you can try uninstalling the AI and reinstalling it. Otherwise, you can open the control panel file in Notepad and check each of the file versions. They must not be duplicated and there must be at least one present. If the Fly Tampa scenery has been updated, then the YSSY part may now be redundant, or it might need to be updated to match the updated product. Link to comment Share on other sites More sharing options...
BernieFlyer Posted December 7, 2020 Author Share Posted December 7, 2020 Thanks Nick. I do have V2 of YSSY so maybe the Enhanced APX no longer works as you say. I still have an issue with the Default AI option not appearing after a re-install or Verify Files. Only the Orbx AI Options show. While I can use the file you sent me last year to get all options to show the Non-Orbx ones do not seem to work. Regards Bernie Link to comment Share on other sites More sharing options...
BernieFlyer Posted December 7, 2020 Author Share Posted December 7, 2020 Further to the above, I have given in. No options outside of the Orbx ones when I uninstall/re-install Aus/NZ AI so I have just gone into scenery\world\scenery and turned on the default scenery (disabled by ANZ AI). That fixes my issues when wanting to enable the default AI - (say when I am flying in the UK) but is rather inelegant. I then have to turn it off again in Aus/NZ but so be it. As for Fly Tampa YSSYAPX I will just not worry. I have spent too many hours on this issue. Not the result I like but I guess it will do. I understand Orbx cannot get every system to work as it should but frustrating nonetheless. "Such is life". Thanks for your attempts Nick. Bernie Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 7, 2020 Share Posted December 7, 2020 Hello Bernie, there is a need for an update and Graham will be producing one for you all. Thanks for your patience so far. 1 Link to comment Share on other sites More sharing options...
BernieFlyer Posted December 8, 2020 Author Share Posted December 8, 2020 Thanks Nick, I appreciate your support!! Regards Bernie Link to comment Share on other sites More sharing options...
BernieFlyer Posted May 20, 2021 Author Share Posted May 20, 2021 Any update on a fix from Graeme if needed? Bernie Link to comment Share on other sites More sharing options...
Graham Eccleston Posted May 20, 2021 Share Posted May 20, 2021 Unfortunately, the Control Panel option for the YSSY APX swap will not work when the Traffic Pack is installed via the xml Add-on method. The best advice we can offer is to go to your FlyTampa/Sydney/Scenery folder and manually deactivate the base APX (ADEX_YSSY_GL_2020.bgl) and activate the FTX one (ADEX_YSSY_GL_FTX.bgl). Link to comment Share on other sites More sharing options...
BernieFlyer Posted May 27, 2021 Author Share Posted May 27, 2021 Ok, thanks Graham. That is what I have done. Link to comment Share on other sites More sharing options...
Recommended Posts