jeanbenedetti Posted September 8, 2019 Share Posted September 8, 2019 Hi I've installed and de-installed several times LOWI scenery on P3D v4 and I have no building at all. Here are screenshots FYI EGLC works fine Thanks for your help Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 8, 2019 Author Share Posted September 8, 2019 Hi Any admin see my question ? Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted September 8, 2019 Share Posted September 8, 2019 Hi Please try a "Verify Files" of LOWI, the Orbx Libraries, and Orbx Object flow. Then go to settings/help/sync simulator. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 8, 2019 Author Share Posted September 8, 2019 Ok thanks Doug, I'll try this next tuesday for the record, I'v already verified files of LOWI and sync simulator I didn't verify libraries and object flows...I'll try this Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 10, 2019 Author Share Posted September 10, 2019 Hi Doug I did everything you said. Problem not solved, LOWI is empy Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 10, 2019 Author Share Posted September 10, 2019 Any admin/Support staff : an idea ?? rather to deinstall and reinstall all orbx products ? Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted September 11, 2019 Share Posted September 11, 2019 Hi Are your scenery complexity settings turned up high enough? You could also please post a copy of your “scenery.cfg” file found at C:\ProgramData\Lockheed Martin\Prepar3D v4. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 Hi Yes scenery complexity is highest (see screenshot) here's my scenery.cfg thanks scenery.cfg Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 11, 2019 Share Posted September 11, 2019 Hello, you seem to have placed LOWI under your Open LC entries. This will not have any noticeable effect but it should be above them. More importantly, you have unticked the LOWI scenery library entry. It will not display unless it is ticked. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 Hi I don't understand, FTX_AA_LOWI is active... Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 FTX_AA_LOWI same level as EGLC it's ticked Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 11, 2019 Share Posted September 11, 2019 Please try moving the Vector AEC entry up one so that it is above the Default scenery entry in your scenery library. Also disable Dynamic 3D autogen vegetation. You will need to restart P3D to see the changes. However, I still cannot replicate your shot exactly unless I remove LOWI and set the scenery complexity to its minimum. Even then there is an airport building on the left that should be in your screen shot. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 There's definitly something wrong with the installer I've desinstalled all ORBX products Then I've re-installed in this order : - ORBX CENTRAL /BASE PACK + P3D reboot - OPEN LC EUROPE + P3D reboot - ORBX LIbraries + P3D reboot - ORBX Objectflow + P3D reboot - ORBX LOWI + P3D reboot then I realize that FTX_AA_LOWI is not registered in the scenery.cfg ! Of course, on LOWI airport, the scenery displayed is the default P3D LOWi scenery so I create an entry for FTX_AA_LOWI and restart P3D : and same problem than before, --> deseparetely empty scenery For the record, I'v tryed exactly the same installation on FSX SE, and it worked well I'm pretty sure you have an issue with your installer for P3D (P3D V4.5 on my side) Again..ORBX EGLC works fine Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 11, 2019 Share Posted September 11, 2019 Thanks and you may be right. I have already spent some time trying to replicate the problem. Can you check the contents of the ORBX\FTX_EU\FTX_AA_LOWI folder please? I have scenery 90 items and texture 2007 items. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 Sure scenery : 34 files/3,02Go texture : 1738 files/437Mo Link to comment Share on other sites More sharing options...
oldboy43 Posted September 11, 2019 Share Posted September 11, 2019 Jean, I'm sorry, but there must be 90 files in the scenery folder and 2007 files in the texture folder as Nick writes.Now I checked it on my PC. cheers Karoly Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 Ok so what can I do ? Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 @Nick, obviously the installer doesn't parse all the needed files How can I do to get a working LOWI airport ? Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 11, 2019 Share Posted September 11, 2019 Hello, I have just reinstalled this product and it is indeed short of files. I have enquired as to what is happening. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 11, 2019 Author Share Posted September 11, 2019 ok thanks Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 12, 2019 Author Share Posted September 12, 2019 Hi @Nick. I suppose I'll be notified when this issue is fixed ? Thanks Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 12, 2019 Share Posted September 12, 2019 Working on it with the developers as I type. The problem is found. A fix is promised very soon but I will test it here before I notify you. Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 12, 2019 Share Posted September 12, 2019 @jeanbenedetti Please try verify files now. I have done this to my broken installation and it is fixed. Yours should be too. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 12, 2019 Author Share Posted September 12, 2019 Gorgious, thanks Nick Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 12, 2019 Author Share Posted September 12, 2019 In fact...almost gorgious I have lots of black tiles remaining...maybe still some files missing ?? Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 12, 2019 Share Posted September 12, 2019 Hello, try the control panel, especially the last item which has probably removed those buildings. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 12, 2019 Author Share Posted September 12, 2019 Hi Sorry, I'm not sure to understand what I'm supposed to do ? Which control panel ? Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 12, 2019 Share Posted September 12, 2019 If you go to the LOWI page in Orbx Central, you will see "Configure". Click on that and you will see the control panel that allows a great many options. Selecting the last option should add the missing buildings. Do not forget to click on Save Changes. Link to comment Share on other sites More sharing options...
jeanbenedetti Posted September 12, 2019 Author Share Posted September 12, 2019 Ok, very clear thanks Nick Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.