paul123 Posted April 1, 2019 Share Posted April 1, 2019 Hi I have updated GB south but now I cannot see any buildings. I have added a screenshot of the dome at London. Can you help ? Can see nothing obviously wrong with the ini file. The dome is just flat. Link to comment Share on other sites More sharing options...
Nick Cooper Posted April 1, 2019 Share Posted April 1, 2019 Hello, London Landmarks must be present and also above TEGB in the ini file. Link to comment Share on other sites More sharing options...
paul123 Posted April 1, 2019 Author Share Posted April 1, 2019 Hello Nick . Thanks for your prompt reply. Sorry but landmarks have changed throughout the whole region. That was just an example. Here is my ini. file. Thanks 1000 Version SCENERY SCENERY_PACK Custom Scenery/EGHI_Southampton/ SCENERY_PACK Custom Scenery/Aerosoft - LFPO Paris Orly/ SCENERY_PACK Custom Scenery/X-Plane Landmarks - Dubai/ SCENERY_PACK Custom Scenery/LPFR Faro/ SCENERY_PACK Custom Scenery/Airport_LFPO - Paris Orly XP11/ SCENERY_PACK Custom Scenery/EGAA Belfast/ SCENERY_PACK Custom Scenery/Aerosoft - EBBR Brussels/ SCENERY_PACK Custom Scenery/Aerosoft - EDDF Frankfurt/ SCENERY_PACK Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/ SCENERY_PACK Custom Scenery/Aerosoft - EGLL Heathrow/ SCENERY_PACK Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/ SCENERY_PACK Custom Scenery/Aerosoft - LPFR Faro/ SCENERY_PACK Custom Scenery/Aerosoft - LSGG Genf/ SCENERY_PACK Custom Scenery/Airport Environment HD/ SCENERY_PACK Custom Scenery/BS2001 Object Library/ SCENERY_PACK Custom Scenery/CDB-Library/ SCENERY_PACK Custom Scenery/cemetery/ SCENERY_PACK Custom Scenery/EGBB-UKX/ SCENERY_PACK Custom Scenery/EGBE coventry/ SCENERY_PACK Custom Scenery/EGBM Tatenhill_Scenery_Pack/ SCENERY_PACK Custom Scenery/EGCC Manchester International_v2F/ SCENERY_PACK Custom Scenery/EGGD_Bristol/ SCENERY_PACK Custom Scenery/EGJA Aldernay/ SCENERY_PACK Custom Scenery/EGNM-Leeds tdg/ SCENERY_PACK Custom Scenery/EGNX - East Midlands/ SCENERY_PACK Custom Scenery/EGSH_Norwich/ SCENERY_PACK Custom Scenery/EGTE-Exeter/ SCENERY_PACK Custom Scenery/UK2000 Gatwick Xtreme/ SCENERY_PACK Custom Scenery/gbpro/ SCENERY_PACK Custom Scenery/Global Airports/ SCENERY_PACK Custom Scenery/Graz_LOWG/ SCENERY_PACK Custom Scenery/KSEA Demo Area/ SCENERY_PACK Custom Scenery/LEAL Alicante/ SCENERY_PACK Custom Scenery/LEIB Ibiza/ SCENERY_PACK Custom Scenery/LEPA Palma/ SCENERY_PACK Custom Scenery/LEVX Vigo Portugal/ SCENERY_PACK Custom Scenery/LOWI Demo Area/ SCENERY_PACK Custom Scenery/LOWI Innsbruck Kranebitten 2.0/ SCENERY_PACK Custom Scenery/LPPT Lisbon/ SCENERY_PACK Custom Scenery/LXGB-Gibraltar/ SCENERY_PACK Custom Scenery/OpenSceneryX/ SCENERY_PACK Custom Scenery/OpenSceneryX Installer/ SCENERY_PACK Custom Scenery/RealWeatherConnector/ SCENERY_PACK Custom Scenery/w2xp_Europe_mix/ SCENERY_PACK Custom Scenery/X-Plane Landmarks - Chicago/ SCENERY_PACK Custom Scenery/X-Plane Landmarks - Las Vegas/ SCENERY_PACK Custom Scenery/X-Plane Landmarks - London/ SCENERY_PACK Custom Scenery/Orbx_A_EGLH_Needles/ SCENERY_PACK Custom Scenery/Orbx_A_GB_South_TrueEarth_Custom/ SCENERY_PACK Custom Scenery/Orbx_B_GB_South_TrueEarth_Overlay/ SCENERY_PACK Custom Scenery/Orbx_C_GB_South_TrueEarth_Orthos/ SCENERY_PACK Custom Scenery/X-Plane Landmarks - Sydney/ SCENERY_PACK Custom Scenery/XAirportScenery/ SCENERY_PACK Custom Scenery/yOrtho4XP_Overlays/ SCENERY_PACK Custom Scenery/zOrtho4XP_+37-008/ SCENERY_PACK Custom Scenery/zOrtho4XP_+37-009/ SCENERY_PACK Custom Scenery/zOrtho4XP_+38+001/ SCENERY_PACK Custom Scenery/zOrtho4XP_+38-009/ SCENERY_PACK Custom Scenery/zOrtho4XP_+38-010/ SCENERY_PACK Custom Scenery/zOrtho4XP_+39+001/ SCENERY_PACK Custom Scenery/zOrtho4XP_+39-009/ SCENERY_PACK Custom Scenery/zOrtho4XP_+39-010/ SCENERY_PACK Custom Scenery/zOrtho4XP_+40-009/ SCENERY_PACK Custom Scenery/zOrtho4XP_+41-009/ SCENERY_PACK Custom Scenery/zOrtho4XP_+47+010/ SCENERY_PACK Custom Scenery/zOrtho4XP_+47+011/ SCENERY_PACK Custom Scenery/zOrtho4XP_+47+012/ SCENERY_PACK Custom Scenery/zOrtho4XP_+48+011/ SCENERY_PACK Custom Scenery/zOrtho4XP_+53-001/ SCENERY_PACK Custom Scenery/zOrtho4XP_+53-002/ SCENERY_PACK Custom Scenery/zOrtho4XP_+53-003/ SCENERY_PACK Custom Scenery/zOrtho4XP_+53-004/ SCENERY_PACK Custom Scenery/zOrtho4XP_+54-006/ SCENERY_PACK Custom Scenery/zzz_Treelines_Farms_Europe_v2/ SCENERY_PACK Custom Scenery/3D_people_library/ SCENERY_PACK Custom Scenery/Europe_RoadTraffic/ SCENERY_PACK Custom Scenery/European vehicles library uwespeed/ SCENERY_PACK Custom Scenery/european_vehicles_library/ SCENERY_PACK Custom Scenery/ruscenery/ SCENERY_PACK Custom Scenery/Sea_Life/ SCENERY_PACK Custom Scenery/Shoreline_Objects/ SCENERY_PACK Custom Scenery/SilverLining/ SCENERY_PACK Custom Scenery/THE-FAIB Aircraft Library/ SCENERY_PACK Custom Scenery/THE-FRUIT-STAND Aircraft Library/ SCENERY_PACK Custom Scenery/The_Handy_Objects_Library/ SCENERY_PACK Custom Scenery/Uninstaller/ SCENERY_PACK Custom Scenery/Vehicle Library Extension/ SCENERY_PACK Custom Scenery/ff_library/ SCENERY_PACK Custom Scenery/ff_library_extended_LOD/ SCENERY_PACK Custom Scenery/FJS_Scenery_Library/ SCENERY_PACK Custom Scenery/flags_of_the_world/ SCENERY_PACK Custom Scenery/x_Prefab_Europe/ SCENERY_PACK Custom Scenery/x_Prefab_Library/ SCENERY_PACK Custom Scenery/Flyby_Planes/ SCENERY_PACK Custom Scenery/gt_library/ SCENERY_PACK Custom Scenery/JB_Houses/ SCENERY_PACK Custom Scenery/JB_Library/ SCENERY_PACK Custom Scenery/JB_Objects/ SCENERY_PACK Custom Scenery/MisterX_Library/ SCENERY_PACK Custom Scenery/NAPS_library/ SCENERY_PACK Custom Scenery/People_LIB/ SCENERY_PACK Custom Scenery/Waves_Library/ SCENERY_PACK Custom Scenery/world-models/ SCENERY_PACK Custom Scenery/Wrecked_Vehicles/ SCENERY_PACK Custom Scenery/PPlibrary/ SCENERY_PACK Custom Scenery/R2_Library/ SCENERY_PACK Custom Scenery/RD_Library/ SCENERY_PACK Custom Scenery/RE_Library/ SCENERY_PACK Custom Scenery/zzz_hd_global_scenery4/ SCENERY_PACK Custom Scenery/Orbx_OrbxlibsXP/ Link to comment Share on other sites More sharing options...
Fizzelle Posted April 1, 2019 Share Posted April 1, 2019 Hi Paul, your scenery_packs.ini file is a bit messed up. Please attach it as a file to a reply and we can sort it for you. Link to comment Share on other sites More sharing options...
paul123 Posted April 1, 2019 Author Share Posted April 1, 2019 Please find attached. thanks !! scenery_packs.ini Link to comment Share on other sites More sharing options...
Fizzelle Posted April 1, 2019 Share Posted April 1, 2019 Hi Paul Attached is my suggestion - rename your old one first if you want to try mine. NB: You have 2 x Paris Orly and 2 x Faro - you'll need to delete the ones that don't exactly match your scenery filenames. Also you have 2 x OpenSceneryX entries (I'm not sure you need the Installer entry but I may be wrong). You could also try disabling GB Pro which could help if there's a conflict with the ORBX down south. Let us know how you get on? scenery_packs.ini Link to comment Share on other sites More sharing options...
paul123 Posted April 1, 2019 Author Share Posted April 1, 2019 Will do you have been most helpful. Thankyou . Link to comment Share on other sites More sharing options...
Fizzelle Posted April 1, 2019 Share Posted April 1, 2019 EDIT Missed it, but Ortho4XP Overlays should be directly above Global Airports. My bad. Link to comment Share on other sites More sharing options...
paul123 Posted April 1, 2019 Author Share Posted April 1, 2019 Ahhh will try that. Just uninstalled Orbx and doing a fresh download. Thanks again. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 1, 2019 Share Posted April 1, 2019 Don't forget you'll probably need to slightly re-order your scenery file if you use FTX Central to install it. Link to comment Share on other sites More sharing options...
paul123 Posted April 2, 2019 Author Share Posted April 2, 2019 Hi Yes it was the location of the ortho4xp overlays folder. Well spotted !! thanks so much for your help. Paul Link to comment Share on other sites More sharing options...
Fizzelle Posted April 2, 2019 Share Posted April 2, 2019 34 minutes ago, paul123 said: Hi Yes it was the location of the ortho4xp overlays folder. Well spotted !! thanks so much for your help. Paul Well let's have a new screenshot or two then as a reward for all my hard work!! Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Well I thought it was all sorted until I purchased Orbx Southampton. Now looking at the buildings from the runway on the left they look nothing like other orbx videos of southampton on youtube. I have attached my ini. file again.I have disabled gbpro as you said and ortho4xp overlays temporarily. Can you help ?? scenery_packs.ini Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 The airport must be above Global Airports. Your ini file is a bit off kilter again. When I have a minute later I'll redo it for you. Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 I have moved orbx southampton above global airports as you suggested but still got the same effect. Thanks. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 OK Paul, major probs with your ini and I'm working on it now. Should be back on here with it in 30 mins or so! Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 Try this scenery_packs.ini Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Thanks for your reply again. The problem is if I save this file will xplane over write it again on start up ? Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 1 minute ago, paul123 said: Thanks for your reply again. The problem is if I save this file will xplane over write it again on start up ? No it should replace the original one you have. Just make sure it's the only scenery ini file you have in the custom scenery folder Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Ok will give it a go and report back. Thankyou. Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Hi as I thought xplane creates a second ini.file automatically...so there are 2 now in custom scenery folder. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 It shouldn't, did you remove the one you attached above first before substituting mine? Do you have more than 1 Custom Scenery folder? Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Yes I deleted all ini.files and just installed yours. I do have another custom scenery folder but it is on another xplane installation on another separate drive as a spare copy. The 2 are not linked. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 All right! Don't worry, we'll get there... Firstly, just attach your new ini file that XPlane just created. Secondly, are you using a 3rd party organiser at all? Thirdly, can you confirm your XPLANE shortcut is actually pointing to the correct installation, within which my ini file has been copied. Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Really appreciate your help!! Ok I have deleted all orthoxp tlies and overlays for the area of GB south so hopefully eliminating that. No 3rd party organiser used. Yes the shortcut is linked to my current running copy of xplane. Its really weird. Looking at the photos of Southampton airport the static planes look fine, its just the buildings look like lego. But again orbx GBsouth does not look right again, flat buildings in parts but the darned thing was working fine again after your help last night... scenery_packs.ini Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 That looks like your original is back as if mine had never been installed. Xplane looks to me like it's reading in another copy from somewhere. Can you please post a screenshot of your custom scenery folder with the address bar at the top also visible. Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Here you go. Hope you can read it. I have 2 monitors. Thanks. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 2 monitors wow! I have a small screen powered by a couple of hamsters on a treadmill with a rabbit holding up placards telling me what's on the screen as it's too small! Hang on a minnit, what's in your 000_disabled folder? I have an idea! Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Nothing in folder. Photo of ORBX now. Bad autogen. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 I'm attaching a new file. The Ortho files are still in there but if you have removed them, then remove those entries for the ini as well. Delete the one in your custom folder first. Is your maximum objects slider to the right in your graphics settings? scenery_packs.ini Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Last night over London when working fine. No comparison. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 2 minutes ago, paul123 said: Last night over London when working fine. No comparison. Not sure if your post was before or after mine. In your screenshot you have overlapping scenery layers. Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Ok objects was on high not maximum. Reloading sim now. I still need ortho files for north of orbx GB south and parts of europe.. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 Yup that's fine and you'll need the overlays too - put that (yOrtho4xp_overlays) directly above Global Airports in my ini file when you reload them Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Well overlapping scenery layers would explain a lot. How do I go about changing that ?? Just changed slider to max for objects but still no difference. Trees and landscape on orbx are fine, its just some buildings are flat or look default. Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 Just now, paul123 said: Well overlapping scenery layers would explain a lot. How do I go about changing that ?? Just changed slider to max for objects but still no difference. Trees and landscape on orbx are fine, its just some buildings are flat or look default. My final thought for now and if it doesn't work I'll PM you. Download my revised file from 10 minutes ago and put in your custom scenery folder, delete your original first. Try that. Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Ok I have deleted the ini.file that xplane have created. I still have a ini.bak file. I am going to cut and paste your amended ini file into the custom scenery, checking ortho overlays is above global airports then restart xplane. Is that correct ? Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 Yes sir Link to comment Share on other sites More sharing options...
paul123 Posted April 4, 2019 Author Share Posted April 4, 2019 Ok trying again now. Are you one of the support team or just a really helpful member ?? Link to comment Share on other sites More sharing options...
Fizzelle Posted April 4, 2019 Share Posted April 4, 2019 I'm just a Guy, you know... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.