highlevel83 Posted January 23, 2018 Share Posted January 23, 2018 Dear Orbx/members, When I first installed KTVL it worked perfectly. I'm not sure what happened, and even since completely reinstalling P3Dv4, I have no buildings. I've run AEC, and I've tried different terrain mesh resolutions. I've only reinstalled Orbx scenery so far. Please see screenshot for the order. The other sceneries work fine (bar Skagit, separate post). Any suggestions are gratefully received. Thanks, Chris Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted January 23, 2018 Share Posted January 23, 2018 Hi Chris Please check from in game top of screen under Options/Add-ons that ObjectFlow2 is checked enabled. Please check that “Use ObjectFlow 2 in Prepar3D v4” in FTXC3 settings is checked enabled. Cheers Doug Link to comment Share on other sites More sharing options...
highlevel83 Posted January 24, 2018 Author Share Posted January 24, 2018 Doug... nailed it! Thank you so much. Didn't realise there was an Options/Add-on ObjectFlow2 bit. Not sure how it got disabled but lesson learned. Link to comment Share on other sites More sharing options...
deirpo Posted October 20, 2018 Share Posted October 20, 2018 On 1/22/2018 at 7:08 PM, Doug Sawatzky said: FTXC3 settings I am having this very problem ( no buildings or stationary objects) . I checked both ObjectFlow2 boxes are ticked. Any other suggestions? Thanks much Barry Link to comment Share on other sites More sharing options...
Stewart Hobson Posted October 20, 2018 Share Posted October 20, 2018 5 hours ago, deirpo said: I am having this very problem ( no buildings or stationary objects) . I checked both ObjectFlow2 boxes are ticked. Any other suggestions? Thanks much Barry Welcome to the forums. Have you installed the Orbx Libs? Link to comment Share on other sites More sharing options...
paradisca1 Posted October 24, 2018 Share Posted October 24, 2018 I have the same issue. Orbx libraries are installed and FTXC says up to date. Objectflow 2 is active. This is only in Prepar3dv4.3. The terminal buildings, ai aircraft and control tower all are there in FSX. All 6 other NCA Orbx airports are also fine in Prepar3dv4. Thanks for a great product. Steve P. Link to comment Share on other sites More sharing options...
paradisca1 Posted October 24, 2018 Share Posted October 24, 2018 I thought FTX Central notified that updates were available. I believed I had the latest version 3. This problem was fixed by downloading and running the installer found at https://orbxdirect.com/ftxcentral Steve P Link to comment Share on other sites More sharing options...
deirpo Posted November 10, 2018 Share Posted November 10, 2018 On 1/22/2018 at 7:08 PM, Doug Sawatzky said: FTXC3 settings I am having this very problem ( no buildings or stationary objects) . I checked both ObjectFlow2 boxes are ticked. Any other suggestions? Thanks much Barry Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.