Akbaris Posted September 26, 2017 Share Posted September 26, 2017 Hello Everyone, I have an issue with airport elevation with many of my North American airports I can't find these airports in the Auto correction in the FTX app. Is there any other way to fix this issue? Thank you, Shahin Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted September 26, 2017 Share Posted September 26, 2017 Hi Shahin, First, please review and apply the below procedure. Ensure the Orbx Libs are installed and up to date. (is there a blue notification above the settings button in FTXC3?) Ensure all of your 3rd party addons are at the top of your scenery library and above your FTX entries. Then in FTX Central 3 Insertion points, move "FTX entries should be inserted below" just below your last 3rd party addon. Then move the "openLC entries should be inserted below" just below your FTX entries. and click "Save". Then run the "Force Migration" option. Finally Click on the "Clear Temp" button. Then, if you have Vector installed, there is a Vector control panel access button at the bottom of the FTXC3 settings page. When you open it you can select the amount of road coverage etc, be sure to uncheck the "Frozen Surface (in winter only)"option, and check the Australia Add-Ons under the “Settings” tab, then go to the Airport Elevation Correction (AEC tool) tab and run the auto configuration process and be sure to click on "Appy" when it is done scanning. Cheers Doug Link to comment Share on other sites More sharing options...
Akbaris Posted September 26, 2017 Author Share Posted September 26, 2017 Hello, thanks for the response. I did all that but I am still having the same issue.... Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted September 26, 2017 Share Posted September 26, 2017 Ok, then we will need more specifics, such as screenshots with coordinates from the Shift+Z key please. Thanks Doug Link to comment Share on other sites More sharing options...
Akbaris Posted September 26, 2017 Author Share Posted September 26, 2017 screen shot of what exactly?? thanks Link to comment Share on other sites More sharing options...
Akbaris Posted September 26, 2017 Author Share Posted September 26, 2017 Hello, I have attached my Scenery Library. I hope that's what you meant by screenshots. I think there is something wrong with my Mesh, When I unclick North American mesh then elevation goes back to normal! But I guess the mesh is off then. Thanks Shahin Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted September 26, 2017 Share Posted September 26, 2017 Hi, Thanks for those as well, but we would like to see screenshots with coordinates from the Shift+Z key please, of the airports you are seeing the elevation issues at. Thanks Doug Link to comment Share on other sites More sharing options...
Akbaris Posted September 26, 2017 Author Share Posted September 26, 2017 Hello Thanks again, here are two examples of the airports, KVPS and 2AK4 Thank you, Doug Shahin Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted September 26, 2017 Share Posted September 26, 2017 What is your mesh resolution set at? It should be at 5m. Cheers Doug Link to comment Share on other sites More sharing options...
Akbaris Posted September 26, 2017 Author Share Posted September 26, 2017 It is set to 1m, I changed it to 5m. and it did not change anything! Link to comment Share on other sites More sharing options...
Akbaris Posted October 14, 2017 Author Share Posted October 14, 2017 Anyone has any other ideas..... thank you guys Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted October 14, 2017 Share Posted October 14, 2017 I actually see the same and have discovered that it's the FS Global Ultimate NG mesh product that is casing this, if I uncheck/deactivate it in my scenery library all is good for these locations, this mesh product does create this issue for many other locations as well. The PILOTS AFM2 tool works to correct some, but it did not correct 2AK4, but if you register your product at the below website, you will get free access to this tool if you don't already have. https://www.pilots.shop/Cms/Ui/Pages/Products/MainPage.aspx?id=d3fca479-6c4c-465b-bd75-97445878ae48 Cheers Doug Link to comment Share on other sites More sharing options...
Akbaris Posted December 1, 2017 Author Share Posted December 1, 2017 Thank you I have downloaded the AFM2 tool and it works for some of the airports in North America and it fixed the issue but not for all. Not for 2AK4. Thanks for your help. Shahin Link to comment Share on other sites More sharing options...
Lude2Envy Posted February 19, 2018 Share Posted February 19, 2018 On 10/14/2017 at 6:19 PM, Doug Sawatzky said: I actually see the same and have discovered that it's the FS Global Ultimate NG mesh product that is casing this, if I uncheck/deactivate it in my scenery library all is good for these locations, this mesh product does create this issue for many other locations as well. The PILOTS AFM2 tool works to correct some, but it did not correct 2AK4, but if you register your product at the below website, you will get free access to this tool if you don't already have. https://www.pilots.shop/Cms/Ui/Pages/Products/MainPage.aspx?id=d3fca479-6c4c-465b-bd75-97445878ae48 Cheers Doug I just did a clean install of P3D v4.2 and all of my ORBX products except for airports. I too am having elevation issues at KVPS. I've done all of the steps above but I do NOT have FS Global installed so why am I having elevation issues at KVPS? Thanks. Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted February 19, 2018 Share Posted February 19, 2018 Hi, Could you please post some screenshots and a copy of your scenery.cfg? Thanks Doug Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.