hanss Posted January 30, 2017 Share Posted January 30, 2017 All, After installing FSGU NG last week, I have seen a big improvement in sharpness of mountains and terrain elevation. However I came across one elevation issue at PACV picture attached, LAT: N60. 29,64 LON: W145.28,50. The airfield lies lower than the surrounding area. Before I installed FSGU NG there was no problem. I tried to use ORBX AEC to correct it, but PACV is not to be found in AEC. http://fsfiles.org/flightsimshotsv2/image/GCE2 Regards Hans Link to comment Share on other sites More sharing options...
flythebigjets Posted January 30, 2017 Share Posted January 30, 2017 Open FTX Global Click on FTX Global Range - select FTX Global Vector Configure this product... Control Panel Airport Elevation Corrections I always click "Run Auto-Configuration" but you can do things manually. Once this utility has finished running you will get a message saying something on the lines of it ran successfully - click OK - then click Apply ( if you do not click "Apply" your changes won't work). Hope this helps! Link to comment Share on other sites More sharing options...
hanss Posted January 31, 2017 Author Share Posted January 31, 2017 Thanks, but that is what I did, But PACV was not in the AEC. Hans Link to comment Share on other sites More sharing options...
Nick Cooper Posted January 31, 2017 Share Posted January 31, 2017 FSGU NG ? Is this an acronym for a mesh product? I wonder why you would see an anomaly if you have South Alaska active? Link to comment Share on other sites More sharing options...
Claude Troncy Posted January 31, 2017 Share Posted January 31, 2017 @hanss Bonjour, Just run AFM2 for PACV. It works for me. AFM2 is the new "aerodrome flattening mesh" for FSGU NG. ( @Nick CooperFSGU NG is for "FS Global ultimate new generation" the new mesh from Pilot's) Cheers Claude Link to comment Share on other sites More sharing options...
hanss Posted February 1, 2017 Author Share Posted February 1, 2017 Hello Claude, I have asked Stefan to get me the AFM2 tool. Thanks for the advice. Regards Hans Link to comment Share on other sites More sharing options...
Claude Troncy Posted February 1, 2017 Share Posted February 1, 2017 @hanss Hello, In fact you can download AFM2 from the pilot's site once you have register FSGU NG. It is in beta version, the only pb is that you have to enter your credential each time you run the program. Stefan told me it will be corrected in a future version. Cheers Claude Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.