PaulFWatts Posted November 29, 2016 Share Posted November 29, 2016 Hi, For some time I've had a problem with the Apron and Taxiway textures at YBBN & YSCH as per the screenshots. I've tried all the suggestions on the Avsim & Orbx forums but have never been able to solve this. I'm running the latest P3D V3.4 and FTX3 on a i7 6700 with a GTX 1080 card and 16Gb memory with 500Mb SSD. I've tried running "FSX Ground Poly" for YBBN but while it improves the Apron the Ramp area (as shown in Capture4) remains the same poor quality and the runway then looks blurry and poor quality texture. I'm having the same problem at YSCH. I have a lot of other ORBX airports plus running all the ORBX LC's, Vector, Regions, Base package, Libraries, etc with everything up to date. Don't have this problem with the other airports. Since I've had this problem for so long I'm not sure now if it started when I installed Rex4 or Rex WorldWide Airports HD or if it was a problem before that. Would appreciate someone posting a screenshot of what the Apron, Taxiways and Parking Area is supposed to look like at YBBN (for comparison purposes) and appreciate any help with solving this problem. Have literally spent a number of hours trying to solve it and given up a number of times. Kind regards Link to comment Share on other sites More sharing options...
teecee Posted November 29, 2016 Share Posted November 29, 2016 Might be coincidence, but both these airports have been "done" by either Ozx or by Ant (Ants Aussie airports).. and both used PR..you do not have any of their stuff installed do you? Teecee. Link to comment Share on other sites More sharing options...
PaulFWatts Posted November 29, 2016 Author Share Posted November 29, 2016 5 minutes ago, teecee said: Might be coincidence, but both these airports have been "done" by either Ozx or by Ant (Ants Aussie airports).. and both used PR..you do not have any of their stuff installed do you? Teecee. Thanks teehee for replying. The only non ORBX airport I have is Fly Tampa YSSY. Everything else is ORBX. Link to comment Share on other sites More sharing options...
Alex Goff Posted November 29, 2016 Share Posted November 29, 2016 Hi Paul, For YBBN, you have the ground polygons disabled which will display photoreal textures and your ground detail map which appears to be set to grass. Enable one of the ground polygons options at the top of the control panel to display the ground polygons instead. Regarding YSCH, it predates our use of ground polygons in airports and I believe is photoreal-only. Link to comment Share on other sites More sharing options...
PaulFWatts Posted November 29, 2016 Author Share Posted November 29, 2016 57 minutes ago, Alex Goff said: Hi Paul, For YBBN, you have the ground polygons disabled which will display photoreal textures and your ground detail map which appears to be set to grass. Enable one of the ground polygons options at the top of the control panel to display the ground polygons instead. Regarding YSCH, it predates our use of ground polygons in airports and I believe is photoreal-only. Hi Alex, I've tried the ground polygons at YBBN and it then makes the runway look terrible plus blurry markings. While it makes the Apron look better the parking area still looks the same strange grass hybrid. Re "Ground detail map set to grass" is there any way to change this? I have a similar problem at ORBX YPEC where the runway and taxiways looks like some sort of grass hybrid with markings on it. Link to comment Share on other sites More sharing options...
petfy Posted November 29, 2016 Share Posted November 29, 2016 That is REX WA grass texture you are seeing. Refer to the Compatibility forum to switch it off. Link to comment Share on other sites More sharing options...
PaulFWatts Posted November 30, 2016 Author Share Posted November 30, 2016 A very BIG thank you petfy. This is indeed the problem! Link to comment Share on other sites More sharing options...
petfy Posted November 30, 2016 Share Posted November 30, 2016 Very tongue in cheek I should refer to it as the REX WA noxious weed texture as it appears everywhere Link to comment Share on other sites More sharing options...
Enrique Gallegos Osorio Posted October 27, 2018 Share Posted October 27, 2018 How did you solve it? Link to comment Share on other sites More sharing options...
Nick Cooper Posted October 27, 2018 Share Posted October 27, 2018 Hello, the answer is in this topic. Link to comment Share on other sites More sharing options...
Enrique Gallegos Osorio Posted October 27, 2018 Share Posted October 27, 2018 Hi nick thanks again sorry for the double post but i cant seem to find a guide or a way to fix this..... can you point me to a guide or a download for that file you mentioned on the other post?. thanks. Link to comment Share on other sites More sharing options...
Nick Cooper Posted October 27, 2018 Share Posted October 27, 2018 Hello, the file is Scenery\World\texture\detail1.bmp. There are many versions available. You should be able to find some in ORBX\Scripts\Aero\Source Link to comment Share on other sites More sharing options...
petfy Posted October 28, 2018 Share Posted October 28, 2018 The problem was so bad that REX put a "disable grass texture" in the Worldwide Airports configuration page. Link to comment Share on other sites More sharing options...
Enrique Gallegos Osorio Posted October 28, 2018 Share Posted October 28, 2018 hey yeah, ive seen the disable grass textures but something is not right. ive changed for the cracked detail.bmp and it didnt show any diference if it did i coudnt even notice it. so i went ahead and uninstalled fully p3d. (registry deletes , folder and anything with lm on its name pretty much) installed p3d then loaded all orbx things from ftx central, i forced migration then opened ftx vector and ran the tool idk what it does but my brother told me to ran it every time an addon is installed. opened p3d and went to ybas now it looks like concrete covered in sand but still not concrete, this is driving me nuts ill leave a screenshot for you to see this is the stock only have orbx and p3d, no other addon whatsoever, i even went to veryfy files etc etc, anyone could have another idea?. ill put up my specs for you to see. Nick and others thanks again for your time and help. Link to comment Share on other sites More sharing options...
zulk Posted November 13, 2018 Share Posted November 13, 2018 Helo Nick I just install YBBN and having the similar problem look the thread I don't see how to fix the taxi way? If there is a thread on this topic could you please re post it . Thank you Zulk Link to comment Share on other sites More sharing options...
zulk Posted November 13, 2018 Share Posted November 13, 2018 Helo Nick I just install YBBN and having the similar problem look the thread I don't see how to fix the taxi way? If there is a thread on this topic could you please re post it . Thank you Zulk Link to comment Share on other sites More sharing options...
zulk Posted November 13, 2018 Share Posted November 13, 2018 Link to comment Share on other sites More sharing options...
zulk Posted November 13, 2018 Share Posted November 13, 2018 Helo how to fix this please advise thank you. Link to comment Share on other sites More sharing options...
Nick Cooper Posted November 13, 2018 Share Posted November 13, 2018 Hello, the airport uses photo real ground textures. If you prefer a ground polygon, please visit the product control panel and select your choice. Link to comment Share on other sites More sharing options...
zulk Posted November 14, 2018 Share Posted November 14, 2018 hi I receive email today advise to go to forum for the fix, is the a fix to this problem ? thanks. --------------------------------------------------------------------------------------------------------------------- Richard Lincoln (Orbx Simulation Systems) Nov 14, 8:18 AM AEDT Hi, YBBN has a Ground Poly, have you enabled it in the Control Panel? Please reeply with the link to the Forum Post created to have this issue fixed.https://orbxdirect.com/refunds Thanks Richard Link to comment Share on other sites More sharing options...
zulk Posted November 14, 2018 Share Posted November 14, 2018 is it possible to get the same quality ground texture like YMML? I believe they were released at the same time? Thanks Link to comment Share on other sites More sharing options...
Nick Cooper Posted November 14, 2018 Share Posted November 14, 2018 Hello, you can try this: Link to comment Share on other sites More sharing options...
zulk Posted November 14, 2018 Share Posted November 14, 2018 Helo Nick I select the second one but the apron is working perfect however the taxi way is different the texture? is this normal or need to reinstall again. I park at ramp 15 small plane as soon as taxi to out the texture is different. Is it possible a bug? please advise thank you Regards, Zulk Link to comment Share on other sites More sharing options...
zulk Posted November 15, 2018 Share Posted November 15, 2018 Helo Nick, It works thank you and appreciate your support :-) Regards, Zulk Link to comment Share on other sites More sharing options...
zulk Posted November 15, 2018 Share Posted November 15, 2018 Helo Nick, thanks Zulk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.