carlobiker Posted November 10, 2015 Share Posted November 10, 2015 Hello guys. I have water issue on LIMJ airport, could you please help me to resolve? P3DV3, ORBX GLOBAL, ORBX VECTOR, ORBX LCEUROPE, ASN, REX4 DIRECT TEXTURE. http://s4.postimg.org/hdkdalsml/Immagine1.pngFIRS PIC http://s16.postimg.org/3wx5und9h/Immagine.pngSECOND PIC Thanks in advance Link to comment Share on other sites More sharing options...
Voyager Posted November 10, 2015 Share Posted November 10, 2015 Hi CarloBiker, No worries. If no other addon interfering, what you need is to adjust the "Insertion Point", here's how: Then see if your Scenery-Library is how this figure: Make adjustments and give feedback. Cheers, Voyager Link to comment Share on other sites More sharing options...
carlobiker Posted November 10, 2015 Author Share Posted November 10, 2015 Thanks voyager. Someting strange happens when i go to scenary library. I set how you advise me, then i saved changes but when i open again SCENARY LIBRARY INSERTION POINTS my changes aren't saved. Maybe is a problem of FTX Central. Yesterday my ftx central icon disappear ( now is white ). I tryed to run again ftx central setup installer but arrived at the end i have an error: http://s9.postimg.org/ity202opb/Immassssssssssgine.png Link to comment Share on other sites More sharing options...
Voyager Posted November 10, 2015 Share Posted November 10, 2015 Hmm ... You need the FTX Central 2 support. Put that your information on the forum: http://www.orbxsystems.com/forum/forum/199-ftx-central-v2-support-forum/ Then, when resolved, re-do the above procedures. Cheers, Voyager Link to comment Share on other sites More sharing options...
carlobiker Posted November 10, 2015 Author Share Posted November 10, 2015 Do that. Thx for support. Finger crossed! Cheers Link to comment Share on other sites More sharing options...
carlobiker Posted November 10, 2015 Author Share Posted November 10, 2015 FTX still don't accept changes on LIBRARY INSERTION POINTS. I save but when i open it again, everything becomes like before...so frustrating. Link to comment Share on other sites More sharing options...
Voyager Posted November 10, 2015 Share Posted November 10, 2015 Did you ever recycled groups, i.e. selected FTX Global, applied and then select another group, for example, Europe, applied? If not, please do it. After could you try to set the insertion point again? Voyager Link to comment Share on other sites More sharing options...
Ed Correia Posted November 10, 2015 Share Posted November 10, 2015 You can set the coloured FTX and OLC entries. Also you can only move one at a time and save before moving the other.Moving the white entries has no effect. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.