Richard Lincoln Posted July 29, 2014 Share Posted July 29, 2014 Hi, I today installed UTX Europe, it was something I won in a comp long ago. I found my Fps sat around 10-15 which is terrible in my opinion, so Vector and OpenLc is looking very tempting and am thinking of purchasing both at the same time.Do these two products have a minimal drain on frames? I know each system is different but I usually achieve good frames with full fat regions. Link to comment Share on other sites More sharing options...
Bruce Hamilton Posted July 29, 2014 Share Posted July 29, 2014 Neither has any frame drain for me, but I've got a monster of a graphics card. If you get good frames in regions, you should be all set. Link to comment Share on other sites More sharing options...
John Lovell Posted July 29, 2014 Share Posted July 29, 2014 I use to use UTX a long time ago. I found the fps hoggers were the lights option that came with it. FTX users the new fps friendly lights, so you won't have any impact in fps Link to comment Share on other sites More sharing options...
gw6aa Posted July 29, 2014 Share Posted July 29, 2014 Don't forget Pilot's FS 2010 mesh to round out the package. I found that frame rates were amazingly good. Flying the F22 Raptor in Prepar3d v2.2 at 200' and 1000Kts the FPS were between 70 and 80. Link to comment Share on other sites More sharing options...
Richard Lincoln Posted July 29, 2014 Author Share Posted July 29, 2014 Thanks gents, I do use Pilots Global 2010 and thought I would try my old UTX, and I also had the lights de-activated and still had a major Fps drop. Logic would dictate to just by both and forget UTX especially since I want to install Open Lc Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.