Derek McAllan Posted July 22, 2010 Share Posted July 22, 2010 G'day guys, Just got PNW this week, installed it and the OZx addons as well. Loving it so far, but can you see something wrong in this picture? That's at Stuart Island 7WA5. I've noticed a few other similar issues at some airfields (sudden dropoffs, artifacts etc) in the area. Any idea what could be causing it? If you need any info, let me know Cheers, Derek Link to comment Share on other sites More sharing options...
Tim Harris Posted July 22, 2010 Share Posted July 22, 2010 Cycle FTXcentral to [Default] and back to [North America] and check that OZx is above any FTX entries in the scenery library Link to comment Share on other sites More sharing options...
Derek McAllan Posted July 22, 2010 Author Share Posted July 22, 2010 Thanks Tim!! Problem solved. Link to comment Share on other sites More sharing options...
Derek McAllan Posted July 22, 2010 Author Share Posted July 22, 2010 OK so I spoke too soon. I can no longer SEE the trench, but is still there. While taxiing down to the runway, I fell through the surface into the now invisible trench Link to comment Share on other sites More sharing options...
Neil Hill Posted July 22, 2010 Share Posted July 22, 2010 Hi Warpspider74, There is an altitude adjustment for 7WA5. Please look in your FSX Scenery/World/Scenery and make sure there is file "ADE_FTX_PNW_7WA5_elevation_adjustment_VicPlus.BGLl" and that the .BGL doesn't say ".OFF" instead. If it does change then the .OFF it to .BGL that should fix the issue but the question would be why, if you applied the North America area in FTX central, the elevation file was still OFF. Cheers, Neil Link to comment Share on other sites More sharing options...
alexf Posted July 23, 2010 Share Posted July 23, 2010 I had the same problem at 90WA and 7WA5. I asked in Ozx forum and it was already known. It was traced to having improperly removed remnants of Vancouver+ I deleted these files and that fixed the problem: - AFX_2WA3_elevation_adjustment_VicPlus.BGL - AFX_4WA4_elevation_adjustment_VicPlus.BGL - AFX_7WA5_elevation_adjustment_VicPlus.BGL - AFX_CAM3_elevation_adjustment_VicPlus.BGL - AFX_S31_elevation_adjustment_VicPlus.BGL - AFX_WA09_elevation_adjustment_VicPlus.BGL - AFX_WA35_elevation_adjustment_VicPlus.BGL - AFX_WN07_elevation_adjustment_VicPlus.BGL Maybe this helps you. Link to comment Share on other sites More sharing options...
Derek McAllan Posted July 23, 2010 Author Share Posted July 23, 2010 Thanks for the input fellas, I'll check it out when I get home tonight. Cheers, Derek Link to comment Share on other sites More sharing options...
alexf Posted July 23, 2010 Share Posted July 23, 2010 Sorry, I meant Victoria+ in my message above. Link to comment Share on other sites More sharing options...
ilya1502 Posted July 23, 2010 Share Posted July 23, 2010 I'm not sure about 7WA5, but I have a trench in 90WA. I'll take a look for the files, but I never had Victoria+ installed. Link to comment Share on other sites More sharing options...
Derek McAllan Posted July 23, 2010 Author Share Posted July 23, 2010 Gonna have to wait to find out what was wrong... my Vista install died tonight Link to comment Share on other sites More sharing options...
Patrick Scharnowski Posted July 23, 2010 Share Posted July 23, 2010 I also read that the OZx airfields are optimized for 10m mesh resolution, so maybe the trenches result from different mesh settings? Link to comment Share on other sites More sharing options...
rosariomanzo Posted July 23, 2010 Share Posted July 23, 2010 I have set my mesh resolution at 10m, still a trench in 7WA5. Will try this weekend with 2m settings. Link to comment Share on other sites More sharing options...
florian455 Posted July 24, 2010 Share Posted July 24, 2010 i'm having the same problem. never had Victoria+, mesh sizes only change how wide the trench is. i'm guessing its a flatten issue on the centerline on the runway. and tried all solutions provide here and on ozx forum... think we have to wait for an update Link to comment Share on other sites More sharing options...
Ed Correia Posted August 13, 2010 Share Posted August 13, 2010 Seems that some are still having problems. Could those having an issue with "potholes" on the runway at 7WA5 please try this out: http://aussiex.org/forum/index.php?showtopic=5913&view=findpost&p=43723 If you could post back any findings at OZx, that would be appreciated. Ed Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.