col1948 Posted February 25, 2019 Share Posted February 25, 2019 I have mentioned this before, I have an AI flight plan for an aircraft to leave EGHI Southampton, most times it is placed on a vacant parking spot, but other times it is placed on a spot that is taken up by a static. On installing the scenery I unchecked the 'Static aircraft' box plus the 'People' box on all of the Orbx scenery and then validate, but they still show up, so am I doing something wrong when installing or are these statics and people unmovable? Col. Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 25, 2019 Share Posted February 25, 2019 Hello, there is nothing wrong with the control panel. You would need to untick the top four boxes and close it to make the change: If your control panel does not save the settings, uninstall the product and then reinstall it. Link to comment Share on other sites More sharing options...
col1948 Posted February 25, 2019 Author Share Posted February 25, 2019 I did that Nick, don't know why it didn't work, it says when you exit your changes will be saved but for some reason they weren't. Also I was going to ask this in the support forum but there is that many sections I wasn't sure which one, sorry mate. I went back in the control pane and they are all un checked, I took a screen shot. Col. Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 25, 2019 Share Posted February 25, 2019 Hello, did you miss this? Quote If your control panel does not save the settings, uninstall the product and then reinstall it. Link to comment Share on other sites More sharing options...
col1948 Posted February 25, 2019 Author Share Posted February 25, 2019 OK Nick thanks, it takes a long time to install again but if that's the case well so be it. Having said that the control panel should save the settings rather than having to uninstall and install again, don't you agree? Col. Link to comment Share on other sites More sharing options...
Nick Cooper Posted February 25, 2019 Share Posted February 25, 2019 Typically, Orbx control panels do not work if either both versions of the files that it maniplates are present or neither. Both is more common and in normal use, duplicates are not created. If you would rather not reinstall, then by all means open the control panel xml file, go through all the files and delete all that have a BGL.OFF suffix. Below is the content of the xml file for you to use as a reference. Given the large number of files to check, I thought you might find it easier to use a few clicks of a mouse and then leave FTX Central to complete the task while you do something else. These are your solutions, the choice is yours. Quote <?xml version="1.0" encoding="UTF-8"?> <configuration> <windowTitle>ORBX EGHI Control Panel</windowTitle> <root>\</root> <headingText> Manage Southampton Airport Complexity Settings</headingText> <optiongroup> <name>StaticFlow (Static Aircraft)</name> <options> <option> <name>Static Airliner</name> <description>Use this option to enable the FlyBe commercial airliners, including the associated objects surrounding them (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Static_Aircraft.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Static_Aircraft.BGL.OFF</offPath> </file> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ADE_FTX_ENG_EGHI_Statics.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ADE_FTX_ENG_EGHI_Statics.BGL.OFF</offPath> </file> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ADE_FTX_ENG_EGHI.BGL.OFF</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ADE_FTX_ENG_EGHI.BGL</offPath> </file> </files> </option> <option> <name>Airliner Associated People Flow</name> <description>Use this option to enable the airliner's associated People Flow (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_StatAC.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_StatAC.BGL.OFF</offPath> </file> </files> </option> <option> <name>Static GA Aircraft</name> <description>Use this option to enable the general aviation aircrafts, including the associated objects surrounding them (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Static_GA_Aircraft.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Static_GA_Aircraft.BGL.OFF</offPath> </file> </files> </option> <option> <name>GA Aircraft Associated People Flow</name> <description>Use this option to enable the GA aircraft's associated People Flow (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_StatGAAC.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_StatGAAC.BGL.OFF</offPath> </file> </files> </option> </options> </optiongroup> <optiongroup> <name>VehicleFlow (Animated Cars)</name> <options> <option> <name>Animated Cars Level 1</name> <description>Use this option to enable level 1 animated cars (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Cars_LVL1.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Cars_LVL1.BGL.OFF</offPath> </file> </files> </option> <option> <name>Animated Cars Level 2</name> <description>Use this option to enable level 2 animated cars (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Cars_LVL2.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Cars_LVL2.BGL.OFF</offPath> </file> </files> </option> </options> </optiongroup> <optiongroup> <name>VehicleFlow (Animated Trains)</name> <type>Toggle</type> <options> <option> <name>Animated Trains Level 1</name> <description>Use this option to enable level 1 animated trains (Default = Disabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Trains_LVL1.bgl</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Trains_LVL1.bgl.OFF</offPath> </file> </files> </option> <option> <name>Animated Trains Level 2 [Default]</name> <description>Use this option to enable level 2 animated trains (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Trains_LVL2.bgl</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Trains_LVL2.bgl.OFF</offPath> </file> </files> </option> <option> <name>Animated Trains Level 3</name> <description>Use this option to enable both levels of animated trains and a steam locomotive (Default = Disabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Trains_LVL3.bgl</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_Anim_Trains_LVL3.bgl.OFF</offPath> </file> </files> </option> </options> </optiongroup> <optiongroup> <name>NatureFlow (Vegetation)</name> <options> <option> <name>3D Grass Level 1 (Normal Grass Patches)</name> <description>Use this option to enable the low grass setting (Default = Disabled) Disabling can increase peformance on lower end PCs. It is recommended to disable 3D Grass Level 1 if Level 2 is enabled.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Grass_LVL1_ObjectFlow.xml</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Grass_LVL1_ObjectFlow.xml.OFF</offPath> </file> </files> </option> <option> <name>3D Grass Level 2 (Dense Grass Patches)</name> <description>Use this option to enable the medium grass setting (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Grass_LVL2_ObjectFlow.xml</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Grass_LVL2_ObjectFlow.xml.OFF</offPath> </file> </files> </option> <option> <name>3D Grass Level 3 (Grass Clumps)</name> <description>Use this option to enable the high grass setting (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Grass_LVL3_ObjectFlow.xml</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Grass_LVL3_ObjectFlow.xml.OFF</offPath> </file> </files> </option> </options> </optiongroup> <optiongroup> <name>PeopleFlow (Static and Animated People)</name> <options> <option> <name>PeopleFlow Airside Level 1</name> <description>Use this option to enable level 1 static and animated people on the apron (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_LVL1.bgl</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_LVL1.bgl.OFF</offPath> </file> </files> </option> <option> <name>PeopleFlow Airside Level 2</name> <description>Use this option to enable level 2 static and animated people on the apron (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_LVL2.bgl</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_LVL2.bgl.OFF</offPath> </file> </files> </option> <option> <name>PeopleFlow Non-Airside</name> <description>Use this option to enable non-airside static and animated people (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_NonAirside.bgl</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_PF2_NonAirside.bgl.OFF</offPath> </file> </files> </option> </options> </optiongroup> <optiongroup> <name>Static Cars</name> <options> <option> <name>Static Cars Level 1</name> <description>Use this option to enable normal density static cars on the parking areas around the airport (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Cars_LVL1.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Cars_LVL1.BGL.OFF</offPath> </file> </files> </option> <option> <name>Static Cars Level 2</name> <description>Use this option to enable high density static cars on the parking areas around the airport (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Cars_LVL2.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Cars_LVL2.BGL.OFF</offPath> </file> </files> </option> </options> </optiongroup> <optiongroup> <name>Miscellaneous</name> <options> <option> <name>Car Park Lights</name> <description>Use this option to enable car park lights around the airport (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Streetlights.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_Streetlights.BGL.OFF</offPath> </file> </files> </option> <option> <name>Ground Services Equipment</name> <description>Use this option to enable the placement of ground service equipment on the airside (Default = Enabled) Disabling can increase peformance on lower end PCs.</description> <files> <file> <onPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_GSE_Items.BGL</onPath> <offPath>ORBX\FTX_EU\FTX_AA_EGHI\Scenery\ORBX_EGHI_PLC_GSE_Items.BGL.OFF</offPath> </file> </files> </option> </options> </optiongroup> </configuration> Link to comment Share on other sites More sharing options...
col1948 Posted February 25, 2019 Author Share Posted February 25, 2019 Thanks again Nick, I came back to tell you this time it worked, don't know why it didn't before. I like to have a lot of AI aircraft and seeing them double parked is a bit annoying, that's why I always un-check the option. I'll know what to do next time it happens, cheers mate. col. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.