caleb1 Posted April 4, 2018 Share Posted April 4, 2018 Any ideas as to how I can fix this elevation issue at KPIT in P3D v4.2? FTX Global Base, Vector, OLC NA. Thanks Link to comment Share on other sites More sharing options...
ScottGridley Posted April 4, 2018 Share Posted April 4, 2018 That's not an easy elevation issue to fix due to the sharp terrain elevation changes at the end of runway 32. That highway is in a trench, and the sim has a hard time resolving the two altitudes. The airport flatten could be trimmed a bit on the right there to make it less of a sharp right angle, but that's about it without going to modelling a sloped poly (payware options). EDIT - liked your screenies in the other thread too! Link to comment Share on other sites More sharing options...
caleb1 Posted April 4, 2018 Author Share Posted April 4, 2018 Ok. Thanks. Glad you like my screenshots! Link to comment Share on other sites More sharing options...
Scott Harmes Posted April 8, 2018 Share Posted April 8, 2018 Hi Caleb, Have you tried running the Vector "Airport Elevations Tool"? Run the Auto configuration and it should fix it up. I just checked mine in the Vector control panel, and KPIT is in the "Enabled" column, so it has an elevation correction applied. I checked in the sim too, and mine looks OK. Also make sure you have your mesh set at 5m. Cheers, Link to comment Share on other sites More sharing options...
caleb1 Posted April 8, 2018 Author Share Posted April 8, 2018 Okay will do thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.