GrantS Posted December 13, 2017 Share Posted December 13, 2017 I purchased LEBB and LDDU yesterday, I have several other sceneries which have no issues but I have seen this issue posted on the forum before where my aircraft is sunk approximately 1/2 way into the ground along with AI aircraft. I have looked at the previous fix but it does not seem to be the same for myself. I have attached the scenery.cfg file Many thanks scenery.cfg Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted December 13, 2017 Share Posted December 13, 2017 Hi Grant First please review and apply the below procedure. Ensure all of your 3rd party addons are at the top of your scenery library and above your FTX entries. Then in FTX Central 3 Insertion points, move "FTX entries should be inserted below" just below your last 3rd party addon. Then move the "openLC entries should be inserted below" just below your FTX entries. and click "Save". Then run the "Force Migration" option. Finally Click on the "Clear Temp" button. Then, if you have Vector installed, there is a Vector control panel access button at the bottom of the FTXC3 settings page. When you open it you can select the amount of road coverage etc, be sure to uncheck the "Frozen Surface (in winter only)"option, and check the Australia Add-Ons under the “Settings” tab, then go to the Airport Elevation Correction (AEC tool) tab and run the auto configuration process and be sure to click on "Appy" when it is done scanning. Cheers Doug Link to comment Share on other sites More sharing options...
GrantS Posted December 13, 2017 Author Share Posted December 13, 2017 Hi Doug, Followed your suggestion, unfortunately, I still have the same issue. Any other suggestions I could try? Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted December 13, 2017 Share Posted December 13, 2017 Hi Could you please post some Screenshots? Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted December 14, 2017 Share Posted December 14, 2017 Also, please have a look at the below topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.