clorgaa Posted June 8, 2017 Share Posted June 8, 2017 Thanks for the sale I have now installed the British Isles but not all is well. My first flight over Scotland showed some desert textures in unusual places see these images http://imgur.com/GCHKmpZ http://imgur.com/n1UNQlk http://imgur.com/aKADJQH http://imgur.com/C9OEKIV I have re-migrated and done the terrain.cfg restore but these anomalies still occur. There is also a problem with Wales particularly with refineries see these http://imgur.com/51q1y8I I am not expecting accuracy but these problems do take away from the enjoyment of flying somewhat Any help will be appreciated Glenn Link to comment Share on other sites More sharing options...
Guest Posted June 8, 2017 Share Posted June 8, 2017 Hi Glenn,Migration is uneffective is you forgot to install ORBXlibs Link to comment Share on other sites More sharing options...
clorgaa Posted June 8, 2017 Author Share Posted June 8, 2017 Sorry but ORBXlibs are up to date and my migration troubleshooter shows all files migrated correctly so it is not that. Also because I use FTX central and run it regularly I can see that it says everything is installed and up to date Link to comment Share on other sites More sharing options...
Guest Posted June 8, 2017 Share Posted June 8, 2017 You have to provide more information about your sim and any third party used. Something is wrong and make your terrain.cfg faulty even if the migration is fine Link to comment Share on other sites More sharing options...
clorgaa Posted June 8, 2017 Author Share Posted June 8, 2017 OK Richard all I have is FSX and ORBX England, Wales, Scotland, Ireland and Northern Island and some ORBX UK airports. I have no other sw for the sim. Anything else you want to know? If you let me know I will see if I can supply it Thanks Glenn Link to comment Share on other sites More sharing options...
Richard Lincoln Posted June 9, 2017 Share Posted June 9, 2017 Hi Glenn, Is Fsx in a fresh state? Have you had any other Landclass software installed in these regions before? To me, it does appear to be texture Morphing but you have tried the Terrain cfg. ? Could you please take another swipe at it? It will not hurt! Link to comment Share on other sites More sharing options...
Mike R Posted June 9, 2017 Share Posted June 9, 2017 Gentlemen. I did wonder if this thread might be relevent here If so, it may help if it were known how it was solved, as it is down as 'resolved'. Mike P.S. I'm suffering from a very similar issue but would describe it as 'scrub substituted for forest', rather than desert. Link to comment Share on other sites More sharing options...
clorgaa Posted June 12, 2017 Author Share Posted June 12, 2017 First thanks for the help offered unfortunately after reinstalling Scotland and refreshing the terrain.cfg, 3 times, including downloading the file from this forum, and doing the re-migration the problem still exists. http://imgur.com/a/fH4Wb] Richard; I only have Wales, England, Scotland, Ireland and Northern Ireland with ORBX libs (current relaease) ORBX Trees, Cardiff, Welshpool and Sunburgh airports and no other ORBX sw There is a slight problem with Wales as shown in my original post. Cheers Glenn Link to comment Share on other sites More sharing options...
Guest Posted June 12, 2017 Share Posted June 12, 2017 Which version of FSX do you have? Was it previously installed into another location ? FTX is certainly doing the job right but in the wrong place Link to comment Share on other sites More sharing options...
clorgaa Posted June 12, 2017 Author Share Posted June 12, 2017 Hi Richard I have got the Gold Edition dvd with the Acceleration Pack. It is installed on a SSD drive of its own. I moved it a about a year ago from a hd and am sure I followed some posted instructions regarding the re-install and at that time did not have Scotland, Ireland, England or Northern Ireland as I only purchased them in the last sale. Also FTX Central 3 has been installed since the move of FSX Hope this helps Cheers Glenn Link to comment Share on other sites More sharing options...
clorgaa Posted June 12, 2017 Author Share Posted June 12, 2017 One thing that I have noticed is when I run the migration tool in FTX Central v3.2.0.3 it always seems to be indicate that it is doing a re-migration of unified Iclookup. Is this right? Link to comment Share on other sites More sharing options...
Guest Posted June 13, 2017 Share Posted June 13, 2017 Hi, Your FTX install seems keeping using the former path after your move of drive. Please delete the 2 directories below: - C:\Users\{votre compte}\AppData\Local\Orbx - C:\Users\{votre compte}\AppData\Local\Temp\Orbx Then Reinstall FTX Central, check install is up to date and Force migration again Link to comment Share on other sites More sharing options...
clorgaa Posted June 13, 2017 Author Share Posted June 13, 2017 Thanks Richard I will try that and maybe try regedit to see if anything points to the C: glenn Link to comment Share on other sites More sharing options...
clorgaa Posted June 13, 2017 Author Share Posted June 13, 2017 Hi Richard OK I have done what you asked but the problem is still there with large parts of Scotland as desert (scrub) Link to comment Share on other sites More sharing options...
Guest Posted June 13, 2017 Share Posted June 13, 2017 I suggest you uninstall and reinstall SCO to make it clean Link to comment Share on other sites More sharing options...
clorgaa Posted June 13, 2017 Author Share Posted June 13, 2017 I have deleted SCO already but I only deleted the .txt file and allowed FTX Central to reinstall. Should I delete all the files and start again? Cheers Glenn Link to comment Share on other sites More sharing options...
Guest Posted June 14, 2017 Share Posted June 14, 2017 21 hours ago, clorgaa said: I have deleted SCO already but I only deleted the .txt file and allowed FTX Central to reinstall. Should I delete all the files and start again? Cheers Glenn That should be enough but the 2 AppData directories too to be sure Link to comment Share on other sites More sharing options...
clorgaa Posted June 15, 2017 Author Share Posted June 15, 2017 Thanks Richard that has cured the issue. I wonder what went wrong originally but now its back to flying just needed to reinstall SCO and FTX Central should have done that at first would have saved a lot of time but I thought it was an issue with SCO. This can now be marked as resolved Cheers Glenn Link to comment Share on other sites More sharing options...
Mike R Posted June 15, 2017 Share Posted June 15, 2017 Hi Glenn. Sorry to chip in on your thread but as you seem to have a similar problem to myself and have resolved it could I ask. 1. I used the uninstall then the install options in 'Central' it seems you didn't? 2. Which .TXT file did you delete? 3. The 'App data directories' referred to above. Where can they be found? Sorry to be a pain but, as you seem to have a resolve on this I just wondered what had been the difference between what you did and what I've done that made the difference? Thanks. Mike. Link to comment Share on other sites More sharing options...
clorgaa Posted June 15, 2017 Author Share Posted June 15, 2017 Hi Mike First thing I did was to delete Scotland using FTX Central by clicking on Scotland in the Europe section and selecting Uninstall and this removed the folders from the FSX\Orbx\FTX_EU folder. Next in C:\Users\"your user name"\AppData\Local\ delete the Orbx folder and in C:\Users\"your user name"\AppData\Local\Temp delete the Orbx folder there. Next I downloaded and installed FTX Central and ran it. Make sure you have not got Only show products I have installed checked in settings and that when you run it shows version 3.2.0.3. Go to Europe and Scotland will show as not installed. Click on it and run install this will download all the files again. Finally run the migration tool in FTX Central settings and hopefully all will be well Hope this works for you Glenn Link to comment Share on other sites More sharing options...
Mike R Posted June 15, 2017 Share Posted June 15, 2017 Thanks Glenn. Top man! I'll give it a go later. Mike (Keeping my fingers crossed). Link to comment Share on other sites More sharing options...
Mike R Posted June 15, 2017 Share Posted June 15, 2017 Hi Glenn. I'm afraid it didn't work for me. There's something strange here but I'm at a loss as to what it is! Thanks for your time with the previous reply. It was much appreciated. all the best. Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.