Vesku-K Posted May 3, 2017 Share Posted May 3, 2017 I do not know if this was the right place but I have Global Vector, Basepack, LC Europe, LC North America, North Carolina Rockies and .... I'll give you pictures of what that airport looks like. What I did wrong, I use P3D. V3.4.22.19868 Link to comment Share on other sites More sharing options...
Vesku-K Posted May 3, 2017 Author Share Posted May 3, 2017 This is pic best regards:Vesku-K Link to comment Share on other sites More sharing options...
wedge1047 Posted May 3, 2017 Share Posted May 3, 2017 Hi Vesku-K, Looks like you need to run the Vector configurator, see below link for info. cheers Reg Link to comment Share on other sites More sharing options...
Rolfspan Posted May 3, 2017 Share Posted May 3, 2017 Hi Vesku-K I have had similar problems. If the problem still exists after Vector the Fix you may try another option. First, do you have a payware addon for CYQM (Simaddon comes to mind)? If so Orbx freeware airports may be affecting your payware and causing this problem. The fix for that might be as follows: Go to - Lockheed Martin\Prepar3D v3\ORBX\FTX_GLOBAL\FTX_FTXG_AIRPORTS\Scenery look for cyqm and rename the bgl to bak or what ever you choose. This should avoid the duplication and leave you with your payware airport. You will need to check for more CYQM entries. I hope this works for you. Rolf Link to comment Share on other sites More sharing options...
larryisenor Posted May 3, 2017 Share Posted May 3, 2017 AEC should definitely be disabled so do it manually or run AEC configurator. Larry Link to comment Share on other sites More sharing options...
Vesku-K Posted May 4, 2017 Author Share Posted May 4, 2017 Hey.I found 3 pieces of CYQM bgl. file. What am I naming again?ADE_FTX_FTXG_CYQM.bglADE_FTX_FTXG_CYQM_CVX.bglADE_FTX_FTXG_CYQM_GB.bglOr is it easier to remove NA Airport pack? And is there possibly more of these compatibility issues with this freeware Airport pack? Vesku-K Link to comment Share on other sites More sharing options...
Vesku-K Posted May 4, 2017 Author Share Posted May 4, 2017 I'll go now Global Vector auto-configuration running through it, and soon I can see if it works. Vesku-K Edit: Now works fine, thank you for all the advice. Best regards:Vesku-K Link to comment Share on other sites More sharing options...
Rolfspan Posted May 4, 2017 Share Posted May 4, 2017 Great news Rolf Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.