Jack Sawyer Posted June 13, 2016 Share Posted June 13, 2016 I just installed England into my fresh install of P3D v 3.2 and took a short flight from EGLC to EGLL. My remaining VAS from such a short flight was a very low 991MB. I don't think FSX was even this low. I have the same add-on and settings, UT2, ASN SP5, Track IR, and EZCA. I wonder if I'll have to lower autogen or other settings? Can someone tell what would be good slider settings in P3D? Hardware: Jetline Hellfire GT2 PC Win 7 Pro 64 ASRock Fatal1ty Z97 Pro, Intel LGA 1150 mobo i7 4790 Quad Core 4.66 GHz Corsair Hydro H80i Liquid Cooling 8 GB Trident X DDR3 SDRAM 2133 MHz 500 GB Samsung 840 EVO SSD 500 GB Samsung 840 EVO SSD 500 GB Samsung 850 EVO SSD 4 GB Nvidia GeForce GTX 980 - Driver 368.22 NV Inspector version - 1.9.6.5) Creative Sound Blaster Z SBX Integrated High Speed Network 10/100/1000 750 Watt Corsair RM Power Supply Creative A250 3-Piece Speaker System P3D v 3.2 Saitek PZ44 Yoke & throttle - Yoke driver Saitek PZ35 Pro Flight Rudder Pedals Samsung S27A550H Monitor Buttkicker Gamer 2 Link to comment Share on other sites More sharing options...
farman Posted June 13, 2016 Share Posted June 13, 2016 Hi, I'm afraid that's something wrong with your systems or installations. Since I installed P3D v3.2, flying with the same planes (PMDG, MilViz etc.) and in the same places (I've installed all the full FTX regions), I forgot what it is an OOM. More, I can land in airports I even couldn't dream of in my FSX times (FSDT, FlyTampa, Aerosoft etc.). Please, take a look at my settings. Regards, Fulvio Link to comment Share on other sites More sharing options...
keino333 Posted June 13, 2016 Share Posted June 13, 2016 992 mb is pretty high almost a full GB Link to comment Share on other sites More sharing options...
Jack Sawyer Posted June 13, 2016 Author Share Posted June 13, 2016 Mine look about the same. Hmm, I have to go physical therapy for my knee surgery, be back later. I printed this out and will compare it to mine. That's what I read and what I went with P3D, supposedly no more OOM's. Thank you kind sir. Link to comment Share on other sites More sharing options...
Jack Sawyer Posted June 13, 2016 Author Share Posted June 13, 2016 I'm not good at all figuring these things out at all. I have seen a lot of errors I don't understand in the FSUIPC log, things like explorer failure, other failures can I post or PM my FSUIPC log? its small and I need help bad as this is very discouraging to me Jack Link to comment Share on other sites More sharing options...
farman Posted June 13, 2016 Share Posted June 13, 2016 35 minutes ago, JS07 said: I'm not good at all figuring these things out at all. I have seen a lot of errors I don't understand in the FSUIPC log, things like explorer failure, other failures can I post or PM my FSUIPC log? its small and I need help bad as this is very discouraging to me Jack Hi, suppose you installed FSUIPC last version, 4.9.5.4 Link to comment Share on other sites More sharing options...
Jack Sawyer Posted June 13, 2016 Author Share Posted June 13, 2016 Yes the very latest as of last week Link to comment Share on other sites More sharing options...
Jack Sawyer Posted June 13, 2016 Author Share Posted June 13, 2016 ********* FSUIPC4, Version 4.955 (1st June 2016) by Pete Dowson ********* Prepar3D.exe version = 3.2.3.16769 Reading options from "G:\P3D\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 7 Module base=59B30000 User Name="Paul Higginbotham" User Addr="paulhiggvette@att.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 15 System time = 13/06/2016 15:23:10 15 FLT path = "C:\Users\Jetline\Documents\Prepar3D v3 Files\" 15 ------ Module Version Check ------ 15 acontain.dll: 3.2.3.16769 15 api.dll: 3.2.3.16769 15 controls.dll: 3.2.3.16769 15 fs-traffic.dll: 3.2.3.16769 15 G3D.dll: 3.2.3.16769 15 language.dll: 3.2.3.16769 15 sim1.dll: 3.2.3.16769 15 visualfx.dll: 3.2.3.16769 15 weather.dll: 3.2.3.16769 15 window.dll: 3.2.3.16769 15 ---------------------------------- 15 Trying G:\P3D\Modules\SimConnectP3D3.dll 15 Found it: trying to connect 15 FS path = "G:\P3D\" 124 ---------------------- Joystick Device Scan ----------------------- 124 Product= Saitek Pro Flight Rudder Pedals 124 Manufacturer= Saitek 124 Vendor=06A3, Product=0763 (Version 1.1) 124 Serial Number= 124 Product= Pro Flight TPM System 124 Manufacturer= Mad Catz 124 Vendor=06A3, Product=0B4D (Version 1.98) 140 Serial Number= G0007131 140 Product= Saitek Pro Flight Yoke 140 Manufacturer= Saitek 140 Vendor=06A3, Product=0BAC (Version 3.4) 140 Serial Number= 140 ------------------------------------------------------------------- 140 LogOptions=00000000 00000011 140 ------------------------------------------------------------------- 140 ------ Setting the hooks and direct calls into the simulator ------ 140 --- CONTROLS timer memory location obtained ok 140 --- SIM1 Frictions access gained 140 --- FS Controls Table located ok 140 --- Installed Mouse Macro hooks ok. 140 --- Wind smoothing fix is installed 140 --- All links okay (except older global weather setting method) 140 ------------------------------------------------------------------- 140 SimConnect_Open succeeded: waiting to check version okay 140 Trying to use SimConnect Prepar3D 5038 Running in "Lockheed MartinÆ Prepar3DÆ v3", Version: 3.2.3.2 (SimConnect: 3.2.0.0) 5038 Initialising SimConnect data requests now 5038 FSUIPC Menu entry added 5054 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 5054 C:\Users\Jetline\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml 5054 G:\P3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 5148 Deactivated for PID=3920, "EZCA.exe" 5163 Memory in use: 802Mb, Avail=3294Mb 24258 G:\P3D\SimObjects\Airplanes\A2A_Piper_PA24_250_Comanche\PA24_250.air 61370 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 61651 System time = 13/06/2016 15:24:12, Simulator time = 15:23:16 (15:23Z) 61651 Aircraft="Piper Piper PA-24 Comanche (A2A)" 65380 Memory in use: 2438Mb, Avail=1658Mb 66971 Starting everything now ... 66971 Note: "G:\P3D\Modules\PFCFSX.DLL", Error 126 (The specified module could not be found. ) 66971 Note: "G:\P3D\Modules\EPICINFO5.DLL", Error 126 (The specified module could not be found. ) 66971 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 67080 ASN active function link set 67080 Ready for ASN WX radar 70481 Advanced Weather Interface Enabled 74755 Deactivated for PID=2396, "explorer.exe" 74755 Lost focus to PID=2396, "explorer.exe" 79529 Deactivated for PID=2396, "explorer.exe" 79529 Lost focus to PID=2396, "explorer.exe" 114224 Deactivated: culprit unknown 114224 Focus lost: culprit unknown 125549 Memory in use: 2711Mb, Avail=1385Mb 144675 Deactivated for PID=2396, "explorer.exe" 144675 Lost focus to PID=2396, "explorer.exe" 185812 Memory in use: 2762Mb, Avail=1334Mb 201912 Deactivated: culprit unknown 201912 Focus lost: culprit unknown 223705 Weather Mode now = Theme 246044 Memory in use: 2842Mb, Avail=1254Mb 306261 Memory in use: 2856Mb, Avail=1240Mb 366430 Memory in use: 2968Mb, Avail=1128Mb 426616 Memory in use: 2995Mb, Avail=1101Mb 486832 Memory in use: 2994Mb, Avail=1102Mb 546970 Memory in use: 3001Mb, Avail=1095Mb 607249 Memory in use: 3020Mb, Avail=1075Mb 667465 Memory in use: 3071Mb, Avail=1025Mb 727666 Memory in use: 3076Mb, Avail=1020Mb 787820 Memory in use: 3097Mb, Avail=999Mb 848037 Memory in use: 3105Mb, Avail=991Mb 908269 Memory in use: 3105Mb, Avail=991Mb 947659 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 947659 Sim stopped: average frame rate for last 886 secs = 35.7 fps 947659 Max AI traffic was 93 aircraft 953228 Deactivated: culprit unknown 953228 Lost focus to PID=4876, "ASNext.exe" 967175 === NOTE: not calling SimConnect_Close ... 968173 System time = 13/06/2016 15:39:19, Simulator time = 15:38:00 (15:38Z) 968173 *** FSUIPC log file being closed Minimum frame rate was 25.0 fps, Maximum was 60.4 fps Minimum available memory recorded was 955Mb Average frame rate for running time of 886 secs = 35.7 fps Maximum AI traffic for session was 93 aircraft Memory managed: 361 Allocs, 361 Freed ********* FSUIPC Log file closed *********** Link to comment Share on other sites More sharing options...
Jack Sawyer Posted June 13, 2016 Author Share Posted June 13, 2016 Also, I use NVI Link to comment Share on other sites More sharing options...
Jack Sawyer Posted June 13, 2016 Author Share Posted June 13, 2016 I changed my Special Effects to be like yours. FSUIPC Version 4.955 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.