Razor33 Posted January 2, 2019 Share Posted January 2, 2019 Good day, I tried to search for it but I didn’t found my exact problem. When I leave an airport ( add-on) and I‘m looking back at the field it is all black. After 10-20 seconds the airfield reloads again. Also when I fly pattern. Everything else is pretty fine no problems at all. I have installed Global, Vector, Europe, Trees, GES, GEN, LOWI, Library. Appreciate your help. Best regards Adrian Link to comment Share on other sites More sharing options...
John Dow Posted January 2, 2019 Share Posted January 2, 2019 Hi that's pretty normal but not for as long as you say it's happening. What are your system specs, and which airport is causing you the problem? Link to comment Share on other sites More sharing options...
Razor33 Posted January 2, 2019 Author Share Posted January 2, 2019 I had the troubles on GAP EDDF and GAP EDNY Professional. I think the phenomenon is the same on all other airports. My specs are: i7 8700k 1080Ti 1TB SSD Mainboard something like 370X Okay, but I think it is quite too Long because even on the pattern. short look away from the airfield and it is nearly complete black. Thanks for the help! Link to comment Share on other sites More sharing options...
John Dow Posted January 4, 2019 Share Posted January 4, 2019 Depending on the airport I get between 1-2 and up to 3-4 seconds of black textures sometimes when I look away and back again. You can adjust the graphics settings in the NVidia Control panel and within P3D/FSX to try and lessen the effect. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.