David_MC Posted November 4, 2017 Share Posted November 4, 2017 I've come across an odd glitch and it seems to be confined to California as far as I can tell. There are random bodies of water where there should not be any. I have attached a screenshot and I currently use FTX Global Base + Vectors + OpenLC NA. Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted November 4, 2017 Share Posted November 4, 2017 Hi David Please apply the below procedure, Ensure the Orbx Libs are installed and up to date. (is there a blue notification above the settings button in FTXC3?) Ensure all of your 3rd party addons are at the top of your scenery library and above your FTX entries. Then in FTX Central 3 Insertion points, move "FTX entries should be inserted below" just below your last 3rd party addon. Then move the "openLC entries should be inserted below" just below your FTX entries. and click "Save". Then run the "Force Migration" option. Finally Click on the "Clear Temp" button. Then, if you have Vector installed, there is a Vector control panel access button at the bottom of the FTXC3 settings page. When you open it you can select the amount of road coverage etc, be sure to uncheck the "Frozen Surface (in winter only)"option, and check the Australia Add-Ons under the “Settings” tab, then go to the Airport Elevation Correction (AEC tool) tab and run the auto configuration process and be sure to click on "Appy" when it is done scanning. Cheers Doug Link to comment Share on other sites More sharing options...
David_MC Posted November 6, 2017 Author Share Posted November 6, 2017 I have done everything you suggested in your post and the problem still persists. I also notice on occasion that the ground textures will flicker between 2 or 3 different textures. Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted November 6, 2017 Share Posted November 6, 2017 Ok, then please do the corrupt terrain.cfg fix in the below post. Cheers Doug Link to comment Share on other sites More sharing options...
David_MC Posted November 7, 2017 Author Share Posted November 7, 2017 I performed the fix but the issue is still present. Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted November 8, 2017 Share Posted November 8, 2017 Ok, then please post more screenshots with coordinates so we can have a closer look. Link to comment Share on other sites More sharing options...
David_MC Posted November 8, 2017 Author Share Posted November 8, 2017 Oceano, California 1st image) N35° 5.75' W120° 35.33' 2nd image) N35° 7.58' W120° 37.64' 3rd image) N35° 6.46' W120° 37.49' Link to comment Share on other sites More sharing options...
David_MC Posted November 8, 2017 Author Share Posted November 8, 2017 San Diego, California 1st image) N32° 46.55' W117° 8.89' 2nd image) N32° 44.82' W117° 6.24' 3rd image) N32° 34.55' W116° 58.40' Link to comment Share on other sites More sharing options...
David_MC Posted November 8, 2017 Author Share Posted November 8, 2017 Near Mt. Shasta, California 1st image) N41° 27.50' W122° 18.53' 2nd image) N41° 21.13' W122° 17.64' 3rd image) N41° 21.10' W122° 17.58' Link to comment Share on other sites More sharing options...
Doug Sawatzky Posted November 9, 2017 Share Posted November 9, 2017 Ok, try this, Please go to your FSX\ORBX\User Documents\Versions folder and delete both "FTX_OLC_NA.txt" and "FTX_OLC_NA1.txt", then reinstall OpenLCNA from FTXC3. Cheers Doug Link to comment Share on other sites More sharing options...
David_MC Posted November 10, 2017 Author Share Posted November 10, 2017 That seems to have fixed it. Thank you for your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.