Ghroznak Posted September 7, 2015 Share Posted September 7, 2015 As the topic says... something is messed up with the Vernonia Muni airfield. When trying to take off in my Twin Otter it crashed... into a huge hole in the runway! With full flaps I was able on second attempt to "bounce" over the hole and take off successfully. Is this 'sink hole' or something supposed to be there? I have Orbx NA Alaska/Canada openLC + Vector + ORBx region Pacific Northwest + 05S Vernonia Muni... See image here, where my Fairchild is almost completely hidden in the hole on the runway... o.O Link to comment Share on other sites More sharing options...
TymK Posted September 7, 2015 Share Posted September 7, 2015 Hi, The first thing to check is your mesh resolution (should be 5 meters or lower). This is usually the cause of issues like that. HTH, Tym Link to comment Share on other sites More sharing options...
Ghroznak Posted September 7, 2015 Author Share Posted September 7, 2015 Thanks. Will try to reduce the mesh and see if that sorts it out. The mesh was set to 5m... so I set it to 2m... but that created even more holes in the runway!! So I set it to 10m and that seems to have fixed it... *edit* Yep, setting mesh to 10m instead of 5m fixed it. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.