Catalina 3D Shockwave light setup

[Tim Harris]

Just in case anyone did not notice (I cant find any reference to this anywhere, of course I have not read the manual yet..)

I have been kinda looking for a setup but not really inclined to hunt too hard....it was only when I thought I may have a bash at adding them when I found out:

the 3D Shockwave light configs come pre-added to the aircraft.cfg, they just need to be made active

[VH-WCE]

awesome! will do that now! I was looking too and didnt realise they were there... until now

cheers,

[tennyson]

Is this correct?

You change the original:

[LIGHTS]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit

light.0 =  3, 3.70, -50.06, 0.56, fx_navred

light.1 =  3, 3.45, 50.06, 0.60, fx_navgre

light.2 =  2, 3.70, -50.36, 0.66, fx_strobe

light.3 =  2, 3.45, 50.36, 0.70, fx_strobe

light.4 =  2, -33.0,0.23, -6.1, fx_strobe

light.5 =  4, 12.2, 0.95, -3.6,  fx_Aerosoft_PBY_vclight,

light.6 =  4, 12.2, -0.95, -3.6,  fx_Aerosoft_PBY_vclight,

light.7 =  9, 5.0, 2.0, -8.5, fx_Aerosoft_PBY_vclight,

// light.0 =  3, 3.70, -50.06, 0.56, Fx_shockwave_navred

// light.1 =  3, 3.45, 50.06, 0.60, Fx_shockwave_navgre 

// light.2 =  2, 3.70, -50.36, 0.66, Fx_shockwave_strobe_nl

// light.3 =  2, 3.45, 50.36, 0.70, Fx_shockwave_strobe_2_nl

// light.4 =  2, -33.0,0.23, -6.1, Fx_shockwave_strobe_3_nl

// light.5 =  3, -41.4, -0.46, 4.02, Fx_shockwave_navwhi_l_old //On Rudder

// light.6 =  1, -41.4, -0.46, 4.02, Fx_shockwave_beaconh_nl//On Rudder

// light.7 =  4, 12.2, 0.95, -3.6,  fx_Aerosoft_PBY_vclight,

// light.8 =  4, 12.2, -0.95, -3.6,  fx_Aerosoft_PBY_vclight,

// light.9 =  9, 5.0, 2.0, -8.5, fx_Aerosoft_PBY_vclight,

// light.10=  5, 4.80,  15.70, 0.00, Fx_shockwave_landing_light_narrow_old

// light.11=  5, 4.80, -15.10, 0.00, Fx_shockwave_landing_light_narrow_old 

To this:

[LIGHTS]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit

// light.0 =  3, 3.70, -50.06, 0.56, fx_navred

// light.1 =  3, 3.45, 50.06, 0.60, fx_navgre

// light.2 =  2, 3.70, -50.36, 0.66, fx_strobe

// light.3 =  2, 3.45, 50.36, 0.70, fx_strobe

// light.4 =  2, -33.0,0.23, -6.1, fx_strobe

// light.5 =  4, 12.2, 0.95, -3.6,  fx_Aerosoft_PBY_vclight,

// light.6 =  4, 12.2, -0.95, -3.6,  fx_Aerosoft_PBY_vclight,

// light.7 =  9, 5.0, 2.0, -8.5, fx_Aerosoft_PBY_vclight,

light.0 =  3, 3.70, -50.06, 0.56, Fx_shockwave_navred

light.1 =  3, 3.45, 50.06, 0.60, Fx_shockwave_navgre 

light.2 =  2, 3.70, -50.36, 0.66, Fx_shockwave_strobe_nl

light.3 =  2, 3.45, 50.36, 0.70, Fx_shockwave_strobe_2_nl

light.4 =  2, -33.0,0.23, -6.1, Fx_shockwave_strobe_3_nl

light.5 =  3, -41.4, -0.46, 4.02, Fx_shockwave_navwhi_l_old //On Rudder

light.6 =  1, -41.4, -0.46, 4.02, Fx_shockwave_beaconh_nl//On Rudder

light.7 =  4, 12.2, 0.95, -3.6,  fx_Aerosoft_PBY_vclight,

light.8 =  4, 12.2, -0.95, -3.6,  fx_Aerosoft_PBY_vclight,

light.9 =  9, 5.0, 2.0, -8.5, fx_Aerosoft_PBY_vclight,

light.10=  5, 4.80,  15.70, 0.00, Fx_shockwave_landing_light_narrow_old

light.11=  5, 4.80, -15.10, 0.00, Fx_shockwave_landing_light_narrow_old 

THanx for that, I would never have known,

Frank

[Tim Harris]

yes that's correct

I also changed the landing lights from

Fx_shockwave_landing_light_narrow_old

to

Fx_shockwave_landing_light

more light, yeah yeah