TomAce
-
Posts
70 -
Joined
-
Last visited
Posts posted by TomAce
-
-
Hi, after last update (1.33.8.0) there is a conflict between default Burj al Arab tower and Orbx version of Burj al Arab after downloading the Bulls Eye Challenge. Please remove your version of the Burj al Arab so we don't have two Burj al Arab in the game.
Thomas.
-
Hi, I live nearby ENAL Ålesund airport and have taken some photos a few days ago from the parking spot near the DHL building (almost standing on the apron).
In the pictures you can see SAS A320 lining up on rwy 24. As you can see there is need for an update to this airport as there is too many trees near the runway, and also some problems with the elevation.
When comparing the pictures you can see the trees should be removed completely and just one small bush remain. The old farm house near the runway should be seen with no problems.
When the A320 is cleared for take off we should see the plane in clear sight. The landing gear should be visible from the apron near the DHL building. I think the runways should be raise a little bit near the threshold of rwy 24.
I have also taken a screenshot from a bit higher in-game so you can see that the A320 actually is standing cleared for take-off.
I hope ENAL will eventually get an update.
Best regards,
Thomas
- 1
-
Can Orbx have a look at ENTO so we can get the statics removed, please? The statics is of low resolution as well. Not a very pretty sight on this airport...
- 1
-
I finally found the fix. In my Community folder there was a folder with the 1.1.0 version and the 2.1.0 version. When I deleted the folder/livery pack it was the 2.1.0 folder that was deleted everytime, and the Orbx Central detected the 1.1.0 folder which was there all the time. Must have been a bug from Orbx/IMS when the 2.1.0 update came last week which did not overwrite the old 1.1.0 folder.
- 1
-
14 hours ago, Nick Cooper said:
Hello,
that is not the case here.
After I installed the product yesterday in response to your topic,
it shows like this:
Please try this:
Go to the location given at Orbx Central\Settings\Downloader\Temporary files and delete the Orbx folder.
Uninstall Orbx Central using the Windows control panel.
Delete
C:\Users\your user name\AppData\Local\Orbx-central-updater and
C:\Users\your user name\AppData\Roaming\Orbx\Central
That will completely remove Orbx Central, then reinstall it from this link
https://orbxdirect.com/central
and see what happens.
Thanks.
I followed every step to the point, but I have still the same issue with this livery pack.
-
I have even disabled auto updates on this product via Orbx Central, but it is still appearing as a possible update in the top right corner. Been like this since last weekend.
-
1 hour ago, Nick Cooper said:
Hello,
what version shows as installed please?
Orbx Central is 4.1.43 and liveries pack shows 2.1.0
-
Everytime I open the Orbx Central app I get a message that there is an update in queue for the Impulse Simulations A32NX Liveries pack. I update, but next time I open the app I get the same message. I have tried to uninstall the liveries pack as well, but I get the same update message every time. I have also tried to log out and in the app and also deleted from Community folder manually.
If I have the Orbx Central app open it will "update" every two-three minutes as well.
Please fix this bug as there is not possible to make this message disappear.
-
On 11/4/2021 at 5:54 AM, Finni Hansen said:
@TomAce I expected the cause to be that the CRJ is in-fact a smaller aircraft than the A320. It was not available when testing happened, so I need to add some entries in the service file for smaller jets!
@John Burgess You are correct sir! Considering the amount of custom GSE's I added, and the clunky behaviour of the in-sim GSE, I opted to only include pushback and fuel truck to avoid clipping into my GSE statics..
-- Finn
Believe you are correct @Finni Hansen. Landed again at Torp with in-game ATC and he sent me to GA apron with my CRJ 900. Would love to get this fixed.
-
9 hours ago, Finni Hansen said:
Hi TomAce!
Does calling a fuel truck and pushback work?
Also, would you mind trying this in the default A320 as well?-- Finn
Pushback works, but not sure about the fuel truck. Can check this next time. I actually don’t fly A320. I fly the CRJ (Aerosoft) only when it comes to airliners.
-
2 hours ago, John Burgess said:
Hi there.
I can confirm what you are seeing.
I know that in testing some were getting atis, some not and suspect that was never resolved.
Since then I think we've found that the name of the atis in the 'afcad' file has to be the same as the airport designator (ENTO) so maybe that's the problem there.
Not sure what's happening with GSE. As far as I know the gates are designated as Ramp GA Large which usually allows the full array of Ground services to be available.
I tried in the airbus and can confirm that they aren't. I seem to remember that during testing they were there but my memory ain't what it used to be!
I'm not using any mods.
All the best,
John
Thanks for taking your time to check this. I’ve been really busy lately so haven’t had time to make a ticket for this one. Will you forward this problem to developer or is a ticket needed to address the issues?
-
2 minutes ago, EasternT3 said:
Sorry, I'm not sure then, last time I flew to ENTO it was all fine although that was pre-SU6, so whether that has changed anything
Found the ATIS is not working either. Would appreciate if someone from Orbx can check this one as well.
-
1 hour ago, EasternT3 said:
Interesting because I get all the services through the mod
Nah, still not getting ground service at gate 1. Can see a ground crew walking around the plane though
-
47 minutes ago, EasternT3 said:
Interesting because I get all the services through the mod
I'm about to start a flight from ENTO - EGKK. Will have another go in a few minutes.
-
10 hours ago, EasternT3 said:
Are you trying to get the services through the ATC menu? I get all the services but then I get them a different way
ATC and also through the Pushback mod.
-
-
When will EGLC be updated to todays correct apron and taxiways?
https://airport-world.com/amp/london-city-airport-completes-major-airfield-expansion-projects/
- 2
-
1 hour ago, John Burgess said:
Thanks for confirming that.
I have an idea as to what might be happening.
When testing we've come across situations in which different people see different things.
For some reason MSFS will sometimes use default ILS's or comms rather than those in the scenery.
A rebuild of the content.xml file usually solved this but maybe ASOBO have finally fixed it in the latest update.
I know that when testing ENTO Finn (the developer of that and ENAL) was getting ATIS whilst I wasn't.
My suspicion is that up until now you have actually been receiving the default atis.
For some reason, possibly to do with the update, this has 'corrected' itself and you are now relying on the atis from the scenery which isn't working.
I suspect I've finally figured out why it isn't working so hopefully Finn can get it fixed.
All the best,
John
Thank you for your quick replies. I have also reported double windsocks on this airport earlier this summer, but no update there.
-
7 hours ago, John Burgess said:
Hi there,
I can confirm but suspect there never was.
I remember mentioning it during testing but can't remember the outcome so I may be wrong!
All the best,
John
This is my home airport and have departed from ENAL hundreds of times so I am 110% sure there has been ATIS before WU6. Can Orbx confirm this is on their tracking list for an ENAL update?
-
There is no ATIS at ENAL anymore. Can someone confirm that this is a bug? Messed up by WU6?
-
This airport is missing the yellow star in the World Map. Can this be corrected in next update?
-
Can also confirm that the problem exists with an empty Community folder (except Orbx ENAL installed of course)
-
Which addon caused the problem? Because I have the same issue for several airports incl ENAL and ENOV.
-
Maybe @Finni Hansen can have a look?
Burj al Arab conflict
in Microsoft Flight Simulator
Posted
...Or at least make that building an option in the Orbx Central for the one who wants to remove that building. This could for example be done by making an "remove" option in the Manage menu.