spud Posted May 29, 2015 Share Posted May 29, 2015 I have read through and even copied the 'MV9_Objectflow.xml' file from the previous posting on the problem of floating terrain at Monument Valley I still have the problem with my recent purchase of the scenery. The included screen shots show some of the problem. The first shows one of the main Buttes floating and the second is from just a bit closer when the floating large Butte becomes normal. this is the only Butte to become normal when approached more closely. There are some other mountains to the right of the screen shots that exhibit the same anomaly but remain floating all the time. Additionally I noticed that almost all signage on posts and not on storefronts in the 'built up' areas of the scenery the text is reversed. Any solution for this problem. http://fsfiles.org/flightsimshotsv2/images/2015/05/29/GCS_120.jpg http://fsfiles.org/flightsimshotsv2/images/2015/05/29/GCS_121.jpg Link to comment Share on other sites More sharing options...
rtphillips370 Posted November 2, 2015 Share Posted November 2, 2015 *Bump* I am also experiencing this issue, I am curious if anyone ever found a fix, any response or direction to a resolution will be greatly appreciated! Link to comment Share on other sites More sharing options...
Guest Posted November 3, 2015 Share Posted November 3, 2015 Hi gents, You should tell us more about your settings if you wish an effective help. Link to comment Share on other sites More sharing options...
spud Posted November 3, 2015 Author Share Posted November 3, 2015 rt, first question is: do you also have the Utah Complete Scenery by Fly Away Simulations installed? If you do open the Scenery sub-folder in that scenery and find the file named: cvxLAKEPOWELL.BGL Add .OFF to the file name (cvxLAKEPOWELL.BGL.OFF) that will eliminate the floating buttes in the Monument Valley scenery. Answer was from another post on the subject that fixed my problem, link is: http://www.orbxsystems.com/forum/topic/100633-old-topic-monument-valley-terrain-errors-asking-again/?hl=%2Bmonument+%2Bvalley Post #7 by Nigel in the above. Link to comment Share on other sites More sharing options...
rtphillips370 Posted November 3, 2015 Share Posted November 3, 2015 I apologize for the lack of detail… First off the only professional large area scenery packages I have installed and activated are those listed below from ORBX, the rest are no where near the area and are isolated homemade scenery packs for airports/airbases and some handmade photo real ranges no other professional packages: Order Number: FSS0416007 Global BASE Global VECTOR Global openLC North America Alaska Canada NA Monument Valley Trees HD I am also running the following settings under the following FSX display tabs: [GRAPHICS] 1. Frames locked to 30fps 2. Screen resolution: 1920x1080x32 3. Filtering: Anisotropic with anti-aliasing 4. Global Texture Resolution: MAX 5. I have LENS FLARE and ADVANCED ANIMATIONS checked, I do not use directx 10 due to problems with some of my aircraft textures not working. [AIRCRAFT] 1. Global Settings: Medium High 2. I also checked aircraft cast shadows on ground and landing lights illuminate ground [sCENERY] 1. All sliders with exception of WATER EFFECTS are set to maximum, Water Effects is set to Low 2.x 2. Lastly for this segment, I DO NOT have GROUND SCENERY SHADOWS checked. [WEATHER] 1. Cloud draw distance set to 90MI with natural thermal visualization. 2. Cloud details set to detailed and slider set to maximum detail. [TRAFFIC] 1. NO airborne / aircraft traffic. 2. Airport vehicle density set to Medium. 3. Land and Sea traffic set from left to right 14% 12% 12% respective… In regards to my problem with the monument valley scenery, I have generate and linked a series of images of that I am seeing. I do not appear to have a problem with the ground scenery such as cars, roads buildings etc, just the monument mountains floating or not coming to shape properly…. i.e. just blurred… The links as follows: 1. Image of my scenery library setup as it pertains to ORBX packages: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-2-005_zpsftbut5zj.jpg 2. Image of floating mountain from Monument Valley Airport: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-3-001_zpsc8jdg9xr.jpg 3. Broader image of the valley with problem: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-3-002_zpsoowv21um.jpg 4. Image of the ill shaped mountain monument I also get: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-3-003_zpst9m4qof2.jpg I hope this information helps describe the problem I am having, system info and order number are in my signature block below… Link to comment Share on other sites More sharing options...
Guest Posted November 5, 2015 Share Posted November 5, 2015 I apologize for the lack of detail… First off the only professional large area scenery packages I have installed and activated are those listed below from ORBX, the rest are no where near the area and are isolated homemade scenery packs for airports/airbases and some handmade photo real ranges no other professional packages: Order Number: FSS0416007 Global BASE Global VECTOR Global openLC North America Alaska Canada NA Monument Valley Trees HD I am also running the following settings under the following FSX display tabs: [GRAPHICS] 1. Frames locked to 30fps 2. Screen resolution: 1920x1080x32 3. Filtering: Anisotropic with anti-aliasing 4. Global Texture Resolution: MAX 5. I have LENS FLARE and ADVANCED ANIMATIONS checked, I do not use directx 10 due to problems with some of my aircraft textures not working. [AIRCRAFT] 1. Global Settings: Medium High 2. I also checked aircraft cast shadows on ground and landing lights illuminate ground [sCENERY] 1. All sliders with exception of WATER EFFECTS are set to maximum, Water Effects is set to Low 2.x 2. Lastly for this segment, I DO NOT have GROUND SCENERY SHADOWS checked. [WEATHER] 1. Cloud draw distance set to 90MI with natural thermal visualization. 2. Cloud details set to detailed and slider set to maximum detail. [TRAFFIC] 1. NO airborne / aircraft traffic. 2. Airport vehicle density set to Medium. 3. Land and Sea traffic set from left to right 14% 12% 12% respective… In regards to my problem with the monument valley scenery, I have generate and linked a series of images of that I am seeing. I do not appear to have a problem with the ground scenery such as cars, roads buildings etc, just the monument mountains floating or not coming to shape properly…. i.e. just blurred… The links as follows: 1. Image of my scenery library setup as it pertains to ORBX packages: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-2-005_zpsftbut5zj.jpg 2. Image of floating mountain from Monument Valley Airport: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-3-001_zpsc8jdg9xr.jpg 3. Broader image of the valley with problem: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-3-002_zpsoowv21um.jpg 4. Image of the ill shaped mountain monument I also get: http://i731.photobucket.com/albums/ww313/lpd4005/ORBX%20Info/RTP370-1-2015-nov-3-003_zpst9m4qof2.jpg I hope this information helps describe the problem I am having, system info and order number are in my signature block below… Thank you for those information. Did you read Spud's topic where the issue is resolved ? Next time, open your own one to make it easier. Anyway, some points to check: 1 - did you download and install USMC patch 1.10 ? 2 - did you also install latest ORBXlibs ? 3 - as you have Vector, did you run autoconfiguration into the Configuration tool ? UT25 should be displayed into the disabled airports list for Vector ("AEC is disabled for") like below: 4 - into FTX Central V2, go to Settings/Tools/Library Insertion Point and set the FTX entry (orange) over OLC (bleu) as follow: Doing that, you will have all your FTX entries above OpenLanclass' ones Last point: mesh for ORBX products should be set to 5m Link to comment Share on other sites More sharing options...
rtphillips370 Posted November 5, 2015 Share Posted November 5, 2015 Sorry for posting on this thread, I didn’t readily see the other thread from Spud so I thought for sake of future customers it would be prudent to keep my problem with someone that had the same, I apologize. I reviewed and double checked response here and I also visited the other thread you indicated, long story short for everyone here and for your staff, I found the below listed file that was mentioned in the other Spud thread and when I disabled it, that cured my problem. I happened to found the below file in a Hill AFB freeware scenery pack I have been using for sometime... I thank all of you for your patience and time in helping me resolve this problem, I am impressed with not only your product but also your staff, this subject may be closed at your discretion... File: cvxLAKEPOWELL.BGL Link to comment Share on other sites More sharing options...
Guest Posted November 5, 2015 Share Posted November 5, 2015 That's nice. Enjoy your flights and feel free to post nice screenshots Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.