rogera Posted April 5, 2014 Share Posted April 5, 2014 I notice that many of the Australian airports have been updated to Dx10/P3Dv2 but so far nothing about Alice. There are several issues and I have a screen shot of one of them below. The runway flashes in spot view after take-off with light grey showing through the darker runway texture. Also at night the apron is like glass with adjacent lighting reflecting very strongly from the surface. Here's a screen shot of the runway flashing: Link to comment Share on other sites More sharing options...
jrrbolkin Posted April 5, 2014 Share Posted April 5, 2014 Are you using Steve's DX10 Fixer? Link to comment Share on other sites More sharing options...
rogera Posted April 5, 2014 Author Share Posted April 5, 2014 Oh yes, v 2.1 (latest version). Link to comment Share on other sites More sharing options...
Ian Routley Posted April 6, 2014 Share Posted April 6, 2014 I suspect the runway flashing in Spot view is not related to DX10, but more related to limitations of FSX native ground surfaces in FSX. Have you tested the same scenario under DX9. I don't believe it is a DZ10 problem, and I don't believe it can be easily addressed. P3Dv2 conversion has little in common with DX10 conversion, so that is a separate isdue Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.