maxter Posted July 26, 2009 Share Posted July 26, 2009 Hi all, Just wondering if anyone has a config for the Beech Duke by RealAir? It would be very much appreciated if someone could post it. Cheers and thanks, Link to comment Share on other sites More sharing options...
Maurice_King Posted July 26, 2009 Share Posted July 26, 2009 All you need to do is replace the stock lights with the shockwave ones they are in the same place. Link to comment Share on other sites More sharing options...
maxter Posted July 26, 2009 Author Share Posted July 26, 2009 Thanks Maurice, me not being particularly bright, have come up with a problem... The RAS LIGHT config is as follows... light.0 = 3, -6.40, -19.70, 1.01, RASDuke_NavRed light.1 = 3, -6.40, 19.70, 1.01, RASDuke_NavGreen light.2 = 3, -26.50, 0.00, 2.20, RASDuke_NavWh light.3 = 2, -6.20, -19.66, 1.01, RASDuke_strobe light.4 = 2, -6.20, 19.66, 1.01, RASDuke_strobe light.5 = 1, -27.68, -0.01, 8.70, RASDuke_beacon light.6 = 7, -7.42, 1.944, -1.69, RASDuke_Recogn light.7 = 10, -7.80, 0.00, 1.50, RASDuke_vclight light.8 = 8, -6.20, -13.20, 1.03, RASDuke_wing //de-icing Boots left wing light.9 = 8, -6.20, 13.20, 1.03, RASDuke_wing //de-icing boots right wing I can't see any entry for a landing light or taxy lights so was wondering which shockwave light entries I use where. I'm just confused which happens easily these days Cheers, Link to comment Share on other sites More sharing options...
Tweaker Posted July 26, 2009 Share Posted July 26, 2009 Over at the A2A Forums they have a few threads with a lot of aircraft in them. That might help you for this one and others you have. I couldn't see the Duke when I had a quick look but it is probably there somewhere. Hope that helps. You can find the forums http://shockwaveproductions.com/forum/viewforum.php?f=32&sid=0966030f7ea38002396494c14da2fd03. Link to comment Share on other sites More sharing options...
maxter Posted July 26, 2009 Author Share Posted July 26, 2009 Thanks Tweaker, but sadly they don't have the Duke in there. Never mind, I will try again. Cheers and all the best, Link to comment Share on other sites More sharing options...
mozzy_06 Posted July 26, 2009 Share Posted July 26, 2009 Try this one. http://a2asimulations.com/forum/viewtopic.php?f=32&t=14620&start=0&hilit=Duke Works a treat. Just remember that, because the landing lights are on the landing gear, to make sure you don't try and turn them on before lowering the wheels. Sometimes it screws up the switch sequence. On another note, if someone can get the taxi lights to light the taxiway I'd be forever grateful. Link to comment Share on other sites More sharing options...
maxter Posted July 26, 2009 Author Share Posted July 26, 2009 Thanks a million Mitchell, very much appreciated indeed. I must have missed it on the A2A forums. Cheers, Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.