Jump to content

Small silly question about SkyVector charts


neucoas

Recommended Posts

 

 

Not the highest of terrain peak, it's the height of the highest feature ...

 

Wiki info :

Maximum elevation figure or MEF is a type of VFR altitude which indicates the height of the highest feature within a quadrangle area. It is of interest to pilots, who want to be aware of the highest mountain peaks and tall towers nearby, so that they can fly above them to avoid controlled flight into terrain. ("Features" includes terrain, trees, towers, and other obstacles.) In a VFR context, this altitude is commonly referred to as a "quadrantal altitude" (not to be confused with an IFR minimum sector altitude or "quadrantal" altitude.)

Unlike the Minimum safe altitude used for IFR flight, the MEF does not include any margin for aircraft clearance above the terrain nor for altimeter error.[1]

In the US, the Federal Aviation Administration issues sectional charts. Each rectangular area covering one degree of latitude and one degree of longitude is divided into four smaller areas called quadrangles (in accordance with the Georef system), each spanning half a degree of latitude and half a degree of longitude. Each quadrangle has its MEF printed in it in thousands and hundreds of feet above mean sea level. For example, 105, means that the highest elevation is 10,500 feet within that quadrangle.

MEFs are determined by taking the point of highest elevation within a quadrangle, adding 100 feet for vertical error, then adding the height of the highest obstacle in the quadrangle or 200 feet, whichever is higher, then rounding up to the next hundred feet

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...