BillW Posted December 8, 2014 Share Posted December 8, 2014 I am using FSGenesis mesh. The Siletz runways are in holes. I do have PNW installed and have had no other problems with ORBX sceneries. Any help is appreciated. Thanks! Link to comment Share on other sites More sharing options...
Alex Goff Posted December 8, 2014 Share Posted December 8, 2014 Hi Bill, Welcome to the forums, for support please add your order number to your signature: http://www.orbxsystems.com/forum/topic/1157-important-notice-please-add-your-order-to-your-sig-for-support/ Cheers, Alex Link to comment Share on other sites More sharing options...
BillW Posted June 18, 2015 Author Share Posted June 18, 2015 Sorry its been so long since I got back to you. I found the file you mentioned. how can I tell if it is turned off? sorry for the ignorance....I'm learning by hard knocks. The runways are at a different elevation from the rest of the area and about mid way down the runway there is a textural change. I'll try to load a picture later. (another new task for me) Thank you for your patience. Link to comment Share on other sites More sharing options...
jabble Posted June 18, 2015 Share Posted June 18, 2015 Hiya, a few things that might help: 1) Download and install the latest Orbxlibs here. 2) Run FTX Central 2, go to Settings->Tools and run the Vector Configuration Tool. Choose Airport Elevation Corrections, run Auto Configuration, and hit apply. 3) In the flight sim, make sure your mesh is set to 5 metres. Link to comment Share on other sites More sharing options...
BillW Posted June 18, 2015 Author Share Posted June 18, 2015 I went through all the normal checks and guess what: I was missing an update of PNW. Thanks for your help! Bill W. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.