Herb J. Villers Posted July 6, 2020 Share Posted July 6, 2020 Hi I have extended the P3D non compatible list posted by Carlos ( see x ) and hope we will soon get the 100 % any time line ? EUROPE EDBJ Jena Schoengleina Airport EGHA Compton Abbas Airfield EGLC London City Airport EGPB Sumburgh Airport EGTH Old Warden Aerodrome ENHF Hammerfest Airport ENSD Sandane Airport ENSG Sogndal Haukåsen Airport CityScene Barcelona x LIDA NORTH AMERICA 2WA1 Diamond Point Airstrip 65S Bonners Ferry Airport 74S Anacortes Airport 77S Creswell (Hobby Field) CNK4 Parry Sound Airport KBLU Blue Canyon-Nyack Airport KIDA Idaho Falls Regional Airport KRDD Redding Municipal Airport KSTS Sonoma County Regional Airport KTEX Telluride Regional Airport W28 Sequim Valley Airport WA79 Walter Sutton's Private Strip CityScene Charleston CityScene Orlando OCEANIA TAP Tapini Airport x YBSU FREEWARE Global Airport Pack EO49 Laufenselden Airfield LIDA Asiago Airport AI Traffic North America General Aviation CAC8 Nanaimo Water Aerodrome CAE3 Campbell River Water Aerodrome CAG8 Pender Harbour Seaplane Base x TASMANIA DEMO x ISLAND DEMO OTHER x //42 747 Immersion x //42 Q400 Immersion x //42 Immersion installer x //42 Precipit FX x AI Traffic Austr NZ x AU Holgermesh Australia x Global Airport pack x AU Holgermesh Australia This loooooooooooooooooooong list shows this way up to today July 6th 2020 regard Herb Link to comment Share on other sites More sharing options...
jotaedo Posted July 6, 2020 Share Posted July 6, 2020 Hello, is there any plan to move those sceneries to the v5 platform or the shall remain on v4 forever? some of those are holding me back to make the jump to v5, but really want to know if I have to hold my breath about them ar just accept that they are gone forever EGLC , for example, its a pretty new product so its a short lived airport, sad thing since Orbx quality is top notch on every product, so its a product that i don't really want to left behind in the jump to v5 regard Link to comment Share on other sites More sharing options...
carlosqr Posted July 6, 2020 Share Posted July 6, 2020 Hi Jotaedo Orbx had said they will be working on the updates though it takes a bit of time We'll get them in time, be sure Regards Carlos Link to comment Share on other sites More sharing options...
Jack Sawyer Posted July 7, 2020 Share Posted July 7, 2020 Wait, what? I just installed almost all of these. I haven’t had a chance to go there but are you saying these cause CTD’s? I’m using V5, the very latest, in fact a 100% new fresh install yesterday. Link to comment Share on other sites More sharing options...
carlosqr Posted July 7, 2020 Share Posted July 7, 2020 1 minute ago, Jack Sawyer said: Wait, what? I just installed almost all of these. I haven’t had a chance to go there but are you saying these cause CTD’s? I’m using V5, the very latest, in fact a 100% new fresh install yesterday. Not sure if they CTD but all the above are not yet compatible with V5 Cheers Carlos Link to comment Share on other sites More sharing options...
Jack Sawyer Posted July 7, 2020 Share Posted July 7, 2020 14 minutes ago, carlosqr said: Not sure if they CTD but all the above are not yet compatible with V5 Cheers Carlos But I just today installed some of them in V5 with Central. Link to comment Share on other sites More sharing options...
carlosqr Posted July 7, 2020 Share Posted July 7, 2020 6 minutes ago, Jack Sawyer said: But I just today installed some of them in V5 with Central. You would have to fly them and test if all is OK Looking forward for the feedback Link to comment Share on other sites More sharing options...
Jack Sawyer Posted July 7, 2020 Share Posted July 7, 2020 Just went to 11S and I got nothing, just dirt and no buildings. The GTN shows 11S, P3D’s menu shows 11S, but not a thing there. Link to comment Share on other sites More sharing options...
tom Posted July 7, 2020 Share Posted July 7, 2020 I didn't think Orbx sceneries became available on Central UNTIL they were compatible Link to comment Share on other sites More sharing options...
SGunard Posted July 7, 2020 Share Posted July 7, 2020 2 hours ago, tom said: I didn't think Orbx sceneries became available on Central UNTIL they were compatible Me too! How could anyone install these in to v5?! They shouldn't be showing in Central! Should they?! Link to comment Share on other sites More sharing options...
Nick Cooper Posted July 7, 2020 Share Posted July 7, 2020 Hello, they do not show in Orbx Central for P3D v5. Link to comment Share on other sites More sharing options...
Jack Sawyer Posted July 7, 2020 Share Posted July 7, 2020 2 hours ago, Nick Cooper said: Hello, they do not show in Orbx Central for P3D v5. My bust Nick, I had been installing so many yesterday I thought I saw some of them, I didn't. Link to comment Share on other sites More sharing options...
Herb J. Villers Posted July 7, 2020 Author Share Posted July 7, 2020 yes GLOBALs all there ( I have ) REGIONS nearly CITIES Honolulu / Portland are there Rest missing AIRPORTS some are there ( at least for me 27 out of 38 ) OTHER IMERSIONS .. completly missing but not all Orbx problems since eg PMDG 777 not in V5 , Q400 not in V5 ( but working in V5 ) PMDG 747 is in V5 .. so why no immersion ? And indeed, installing Orbx scenery via add scenery is not having nice results :-( Link to comment Share on other sites More sharing options...
Jack the Swede in Spain Posted July 7, 2020 Share Posted July 7, 2020 "Q400 not in V5 but working in V5", WRONG there is a version for V5, just download it from you account. Jack Link to comment Share on other sites More sharing options...
reecemj Posted July 7, 2020 Share Posted July 7, 2020 20 hours ago, Jack Sawyer said: Just went to 11S and I got nothing, just dirt and no buildings. The GTN shows 11S, P3D’s menu shows 11S, but not a thing there. 11s is working great in my v5 Jack! Link to comment Share on other sites More sharing options...
Jack Sawyer Posted July 7, 2020 Share Posted July 7, 2020 2 minutes ago, reecemj said: 11s is working great in my v5 Jack! Thanks, it is in mine now too after I did a Verify Files. Link to comment Share on other sites More sharing options...
Herb J. Villers Posted July 8, 2020 Author Share Posted July 8, 2020 On 6/27/2020 at 7:24 PM, Christopher Low said: Are you aware that you can set an insertion point for all Orbx scenery packages, Herb? They do not automatically need to be placed at the top of your Scenery Library. 19 hours ago, Jack the Swede in Spain said: "Q400 not in V5 but working in V5", WRONG there is a version for V5, just download it from you account. Jack Hi Jack , Q400 for P3Dv5 is still not officialy supported by MAJESTIC ( see their forum ) but nevertheless it is working in P3Dv5 ( with some small issues ) Link to comment Share on other sites More sharing options...
Herb J. Villers Posted July 8, 2020 Author Share Posted July 8, 2020 13 minutes ago, Herb J. Villers said: Hi Jack , Q400 for P3Dv5 is still not officialy supported by MAJESTIC ( see their forum ) but nevertheless it is working in P3Dv5 ( with some small issues ) Sorry you are right ..just downloaded the new installer Thankx Link to comment Share on other sites More sharing options...
Robert Apon Posted July 24, 2020 Share Posted July 24, 2020 Checking in with Orbx Central nearly every day to see if these P3d v4 sceneries are released in v5. I hope our loyalties to the Orbx ecosystem continue to be rewarded with upgrades to the v5 platform and keep our substantial investments secure for another flight sim generation. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.