Adam Sutton Posted June 9, 2020 Share Posted June 9, 2020 Hi team, I have installed vector in P5D and this same issue is occurring at VTBS. Can only assume vector hasn't catered for the new airport? Cheers 1 Link to comment Share on other sites More sharing options...
Nick Cooper Posted June 9, 2020 Share Posted June 9, 2020 Hello, the problem is most likely not the same at all, there is a default VTBS in P3D v5. Link to comment Share on other sites More sharing options...
Adam Sutton Posted June 9, 2020 Author Share Posted June 9, 2020 Yes. Is there a way to remove the trees from the taxiways? The problem appears when vector was installed and has disappeared now that I removed it. Have you seen anything on your end? Link to comment Share on other sites More sharing options...
Nick Cooper Posted June 9, 2020 Share Posted June 9, 2020 Hello, are we discussing the addon version of VTBS, as in the topic I split this from, or the now default airport in P3D v5? Link to comment Share on other sites More sharing options...
Adam Sutton Posted June 9, 2020 Author Share Posted June 9, 2020 I am referring to the now default airport in P3Dv5. Without vector it is normal. With vector trees and houses appear throughout the field. No addon was added for the airport (apologies for not being clear). 1 Link to comment Share on other sites More sharing options...
Nick Cooper Posted June 9, 2020 Share Posted June 9, 2020 Thanks, I see the same and I will ask Vector disabled Link to comment Share on other sites More sharing options...
mtn1794 Posted June 9, 2020 Share Posted June 9, 2020 I saw the same, and at RPLL as well. 1 Link to comment Share on other sites More sharing options...
Skyways1142 Posted June 11, 2020 Share Posted June 11, 2020 Same trees issue at EGCC but also with floating/misaligned jetways...UTLive AI aircraft buried in the terminal buildings... Uninstalling Vector clears the issues! Ken Link to comment Share on other sites More sharing options...
Nick Cooper Posted June 11, 2020 Share Posted June 11, 2020 Hello, are you sure that you are not using the P3D v4 version of Vector there. The problem that you illustrate is nothing like the missing airport background at VTBS. Link to comment Share on other sites More sharing options...
PFS Posted June 11, 2020 Share Posted June 11, 2020 I'm running P3Dv5, tons of Orbx products, including Vector for P3Dv5, and I'm seeing the same anomalies (trees on taxiways at VTBS, wandering jetways at EGCC). 1 Link to comment Share on other sites More sharing options...
Nick Cooper Posted June 11, 2020 Share Posted June 11, 2020 Thanks. 1 Link to comment Share on other sites More sharing options...
Hoffie 3000 Posted June 27, 2020 Share Posted June 27, 2020 I installed V5 HF2 as a first installation and found that Vector makes the basic sceneries look very strange. With active Vector for V5 there are trees everywhere and the sceneries look as if Vector is the top layer over the sceneries. Turning it off will improve it, but this is certainly not the intention. Unfortunately, some Orbx entries in the scenery library are above all other entries, although I use the same ones as in V4.5. No matter which Insertion Points I use (just for testing) the entries remain on top of the scenery library. Are there any hints how I could change this? Wolfgang Vector for V5 active: Without Vector for V5: Orbx Entries above all other Scenerie entries Link to comment Share on other sites More sharing options...
Nick Cooper Posted June 27, 2020 Share Posted June 27, 2020 Hello, you have two problems. The first is that you are trying to use Vector for P3D v4 in P3D v5. You will need to stop doing that and use the P3D v5 version of Vector instead. Secondly, Orbx Central places the Vector scenery libraries under Africa and you will need to let it do that. As they are, at the top, they are causing the anomalies. Link to comment Share on other sites More sharing options...
Hoffie 3000 Posted June 28, 2020 Share Posted June 28, 2020 Nick, thank you for your hints, I have checked them and could find the error. 19 hours ago, Nick Cooper said: The first is that you are trying to use Vector for P3D v4 in P3D v5. You will need to stop doing that and use the P3D v5 version of Vector instead. If you select the V5 option in Central, you will of course only see the things that are suitable for V5. Vector for V5 can be recognized easy by the missing height module in the configuration tool. 19 hours ago, Nick Cooper said: Secondly, Orbx Central places the Vector scenery libraries under Africa and you will need to let it do that. As they are, at the top, they are causing the anomalies. My mistake was that I installed the Base Pack first, but then the open LCs, HD Buildings, Trees and finally Vector. But exactly this led to the display problems with entries at wrong places in the scenery library. So I uninstalled everything except Base, then install again Vector and so on. Meanwhile I have installed and checked all my Orbx stuff - everything looks normal. Wolfgang 1 Link to comment Share on other sites More sharing options...
niksan29 Posted June 28, 2020 Share Posted June 28, 2020 (edited) 6 hours ago, Hoffie 3000 said: So I uninstalled everything except Base, then install again Vector and so on and what does your scenary library look like now? and could you check Victoria Falls, maybe there is a problem too?: Edited June 28, 2020 by niksan29 Link to comment Share on other sites More sharing options...
Hoffie 3000 Posted June 28, 2020 Share Posted June 28, 2020 Victoria Falls looks nice. Nick told some weeks ago AfricaLC was just released that with LC you don´t get a better view. So far it is ok for me. I don´t use the Africa Mesh and Photoreal Option for Africa. The Scenery Bibliothek looks now similar to the Bibliothek in P3Dv4.5. Wolfgang Link to comment Share on other sites More sharing options...
niksan29 Posted June 29, 2020 Share Posted June 29, 2020 17 hours ago, Hoffie 3000 said: Victoria Falls looks nice. Yes, it looks better, I probably have a problem because of the mesh ... 17 hours ago, Hoffie 3000 said: in P3Dv4.5. hmm, but this topic for discussion of P5 only Link to comment Share on other sites More sharing options...
Juanjo Posted July 6, 2020 Share Posted July 6, 2020 I have the same problem at RPLL with Global Vector for P3Dv5 installed as can be seen. Now I have uninstalled it in order to fly from this airport Link to comment Share on other sites More sharing options...
Lee H Posted July 10, 2020 Share Posted July 10, 2020 I have the same problem as above at VTSP (Phuket), trees in taxiways. With Vector disabled the problem goes away. I use nothing in Asia except Orbx Global base and vector and only V5 versions. I have checked insertion points, all is correct. Lee Link to comment Share on other sites More sharing options...
Rob4810 Posted September 10, 2020 Share Posted September 10, 2020 I'm having the same issue! I've tried uninstalling and reinstalling loads of times but still I have trees and buildings all over default airports. P3D V5 Vectors Base EU England Rob Link to comment Share on other sites More sharing options...
Calum WE Posted October 23, 2020 Share Posted October 23, 2020 I have this issue too. Has a solution been found for this or should we uninstall vector? Link to comment Share on other sites More sharing options...
Kurtb123 Posted November 26, 2020 Share Posted November 26, 2020 Has a solution been found for this ?? Link to comment Share on other sites More sharing options...
Nick Cooper Posted November 26, 2020 Share Posted November 26, 2020 Hello, I took a look at VTSP and indeed, it is covered in trees. I had previously looked at VTBS and it is also covered in trees. I looked at EGCC and it looked perfectly fine. However, I took a look at a couple of other randomly chosen default airports and they look exactly how they should. I cannot answer "I have this issue too", or "I'm having the same issue!" when there are numerous problems being reported. Link to comment Share on other sites More sharing options...
Rob4810 Posted December 29, 2020 Share Posted December 29, 2020 Hi, did anythings come from this as I have the same issue with trees on default airports within a few ariports around Asia. P3d V5 Vectors Thanks Rob Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 29, 2020 Share Posted December 29, 2020 Hello, as I wrote: Quote I cannot answer "I have this issue too", or "I'm having the same issue!" when there are numerous problems being reported. Can you be specific please? Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 29, 2020 Share Posted December 29, 2020 Hello, on the specific subject of VTSP, indeed the default version is covered in trees when Orbx Vector is added. It may be hard to accept that some of the default airports may not be perfect, so to test the theory, I downloaded an FSX freeware addon and recompiled it for P3D v5. This is how it looks, Orbx Vector still active. No trees and the airport background is working. Link to comment Share on other sites More sharing options...
Rob4810 Posted December 29, 2020 Share Posted December 29, 2020 My apologies. I have tried to fly out of VTBS, VVTS and just looked at VTSP which all of those have trees, buildings and Orbx terrain as using Global base as well. There isn't an airport boarder or permeter, it looks like the airport tarmac area has just been placed on top of terrain. I've tired using the OC to organise my scenery library also tried the classic uninstall then reinstall. I hope that helps. Many thanks, Rob Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 29, 2020 Share Posted December 29, 2020 Hello, probably the airports all need the attention that I gave to VTSP and posted above your post. They would not be the first default airports no not follow their own SDK. Link to comment Share on other sites More sharing options...
Rob4810 Posted December 29, 2020 Share Posted December 29, 2020 Thanks for your quick replies. I'm not that savvy with that stuff, is it quite simple to recompile a FSX file for P3D? Also when Orbx Asia comes next year will that resolve this issue? Many thanks, Rob Link to comment Share on other sites More sharing options...
Nick Cooper Posted December 29, 2020 Share Posted December 29, 2020 Hello, the mention of FSX was just a red herring. The problem with the airports seems to be that whoever made them did not compile them correctly. Here is the default VTBS, once again Vector is active. Here is the same airport but after using the Airport Design Editor to add an airport background, a flatten to exclude autogen and an exclude to remove the default airport. Vector remains active. You can have the files for that one, they are originals made by me. It looks like most of the VTxx airports are the same. VTBS_ADEP5_ADE.bgl VTBS_ADEP5_ADE_CVX.bgl Link to comment Share on other sites More sharing options...
Rob4810 Posted December 29, 2020 Share Posted December 29, 2020 That's great. Thank you for the files I'll give them ago and appreciate the help. Many thanks, Rob Link to comment Share on other sites More sharing options...
HondaJet Posted August 5, 2021 Share Posted August 5, 2021 Nick, I want to try out your files for VTBS but I can not find the bgl files in my P3Dv5.2 folders so I don't know where to put your files. Where do I put these two files you created so I can see if that solves my tree & building problem at this airport? Thanks Link to comment Share on other sites More sharing options...
Nick Cooper Posted August 5, 2021 Share Posted August 5, 2021 Hello, you can either put the files into a scenery folder and create a scenery library entry, or add them to something that is always active and is above the default scenery. The Orbx Libraries scenery folder would fit that bill. Link to comment Share on other sites More sharing options...
rain Posted August 11, 2021 Share Posted August 11, 2021 ".....after using the Airport Design Editor to add an airport background, a flatten to exclude autogen and an exclude to remove the default airport. Vector remains active......" Hi Nick , the files work perfectly, thank you so i tried to make the same for another airport..(there are a lot in s-e asia) but i was not successful. Could you please tell me the correct steps , how to do this in ADE? best regards Rainer Link to comment Share on other sites More sharing options...
SidStarz Posted December 10, 2021 Share Posted December 10, 2021 Trying different airports to fly in and out of across the globe This is VVTS and I'm sure there will be others. Reading the above entries really did not clarify how to fix the issue(s). Am I overlooking anything and is there a fix for this? Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts