Graham Eccleston Posted April 17, 2020 Share Posted April 17, 2020 Lockheed Martin updated many airports to their current ICAO code in P3D V5. We did request a list of these airports but they were unable to provide that information. We are aware of a few but without going through all 24,000 or so default airports, the task of identifying them all was a little beyond us in the short term. We will therefore be updating any of these changed ICAO codes as they are discovered and would request your help in this regard. Could you please post any code changes you identify to this thread and we will track them from here. I will make it a sticky. I'll start the list with a few we are aware of and have updated: YPEC - YLMQ Lake Macquarie Airport YSCH - YCFS Coffs Harbour Airport YMUI - YMAE Murray Island Airport 61B - KBVU Boulder City Municipal Airport Link to comment Share on other sites More sharing options...
vrdubin6 Posted April 17, 2020 Share Posted April 17, 2020 S67 - KMAN Nampa Municipal Airport S80 - KGIC Idaho County Airport U59 - KDIJ Driggs–Reed Memorial Airport This should cover all of Idaho's updated ICAOs for v5. Link to comment Share on other sites More sharing options...
Sabretooth78 Posted April 17, 2020 Share Posted April 17, 2020 (edited) KGPI is former KFCA. I believe there is a setting to change ICAO of that airport to KFCA in Orbx Central in order to enable AI traffic. Edited April 17, 2020 by Sabretooth78 Link to comment Share on other sites More sharing options...
Neptune6 Posted April 17, 2020 Share Posted April 17, 2020 Hi for a new database of ICAO but the same IATA we have SEQU to SEQM MMPS also and more Link to comment Share on other sites More sharing options...
Nick Cooper Posted April 17, 2020 Share Posted April 17, 2020 Hello Patrick, can you be specific please? Link to comment Share on other sites More sharing options...
Hoffie 3000 Posted April 17, 2020 Share Posted April 17, 2020 Lima /Peru Old: SPIM to New: SPJC (Jorge Chavez International Airport) Wolfgang Link to comment Share on other sites More sharing options...
ozboater Posted April 17, 2020 Share Posted April 17, 2020 10 hours ago, Sabretooth78 said: >... I believe there is a setting to change ICAO of that airport to KFCA in Orbx Central in order to enable AI traffic. I learn more and more. When I upgraded to P3Dv5, I noticed that there was no YSCH - the old Orbx ICAO for Coffs Harbour - but it did have the current and correct ICAO of YCFS. FWIW, I moved all my Orbx files from the \p3dv4 folder that Central created in my off sim Library folder, to the new \p3dv5 folder created by Central for (obviously) P3Dv5. Only the products that show up in Central are those currently updated to be v5 compatible and that happily is most of Orbx products. Even though the YSCH folder was copied over verbatim to \p3dv5 and doesn't show up in Central while awaiting update, when I set the sim to take off from YCFS, there, to my pleasure was all my beautiful Orbx YSCH Coffs scenery to fly in. I'm not complaining, I am enjoying. And I know it will be properly updated in due course. I notice Central adding new products to My Products as they are updated. Only a few have needed a small online update for v5 compatibilty. This is very impressive software development. and has been the fastest, simplest and most enjoyable sim change-over I've ever 'endured'. Kudos Orbx Central Team. Sorry for the semi relevant side-track. I just wanted to share this most enjoyable 'quirk'. Cheers Link to comment Share on other sites More sharing options...
chucko62 Posted April 17, 2020 Share Posted April 17, 2020 ETEJ has changes since years to EDQA. Now LM has changed it also to EDQA. RWY03 - 21, before it was 04 - 22. There is now an altitude problem with GES. I hope you can fix it. Bamberg Breitenau is my hometown airport. Best regards Gerhard Jajo Link to comment Share on other sites More sharing options...
Graham Eccleston Posted April 17, 2020 Author Share Posted April 17, 2020 8 hours ago, ozboater said: FWIW, I moved all my Orbx files from the \p3dv4 folder that Central created in my off sim Library folder, to the new \p3dv5 folder created by Central for (obviously) P3Dv5. Only the products that show up in Central are those currently updated to be v5 compatible and that happily is most of Orbx products. Even though the YSCH folder was copied over verbatim to \p3dv5 and doesn't show up in Central while awaiting update, when I set the sim to take off from YCFS, there, to my pleasure was all my beautiful Orbx YSCH Coffs scenery to fly in. I'm not complaining, I am enjoying. And I know it will be properly updated in due course. You will need to remove the files you have copied over from V4.5 for YSCH Coffs Harbour, YPEC Aeropelican and YMUI Murray Island otherwise you will have everything duplicated at those airports with the default airport files now and then when you update those airports with the new Orbx version. New file sets have been created using the new ACIO code for each of these airports. The older file sets are not usable in P3D V5. When you select YSCH or YCFS at the moment you will actually see two airports on top of one another, the Orbx YSCH and the default YCFS. Best to remove Orbx airports from V5 until they are listed as compatible. Link to comment Share on other sites More sharing options...
Dan Pergau Posted April 18, 2020 Share Posted April 18, 2020 I don't know off hand if there is Orbx freeware for this airport but I'll list it anyways.. Lake Simcoe Regional Airport: CNB9 to CYLS As per the Dec 17th, 2009 edition of the CFS Changed name from "Lake Simcoe Regional Airport" to "Barrie-Orillia (Lake Simcoe Regional Airport)" Changed gps_code from "CNB9" to "CYLS" Changed local_code from "CNB9" to "CYLS" Thanks, Dan Link to comment Share on other sites More sharing options...
scubaboy Posted April 20, 2020 Share Posted April 20, 2020 O31 - KHES Healdsburg Municipal Airport - in the Northern California Region. Link to comment Share on other sites More sharing options...
scubaboy Posted April 20, 2020 Share Posted April 20, 2020 (edited) On 4/17/2020 at 4:18 AM, Nick Cooper said: Hello Patrick, can you be specific please? I can tell you about SEQU to SEQM. SEQM: Old Mariscal Sucre Intl. AP in Quito, Ecuador, IATA code: UIO. Now closed, and replaced by a park. In P3Dv5, it is not in the ICAO database, but is still shown on the P3Dv5 map view labeled as SEQM, and they have a park correctly replacing it in the scenery. SEQU: New Mariscal Sucre Intl. AP in Quito, Ecuador, same IATA code: UIO, but is 11 miles away from the old SEQM, and now a new airport in the scenery for v5. Edited April 20, 2020 by scubaboy 1 Link to comment Share on other sites More sharing options...
masterhawk Posted April 21, 2020 Share Posted April 21, 2020 May I suggest the following: 1. run on a vanilla P3Dv5 Installation "simple airport scanner" or similar tool. 2. run on a P3Dv5 Installation with all Orbx stuff the tool again. The difference of both results should be the airports you have to check. Link to comment Share on other sites More sharing options...
mischung Posted April 21, 2020 Share Posted April 21, 2020 2 hours ago, masterhawk said: May I suggest the following: 1. run on a vanilla P3Dv5 Installation "simple airport scanner" or similar tool. 2. run on a P3Dv5 Installation with all Orbx stuff the tool again. The difference of both results should be the airports you have to check. Unfortunately Simple Airport Scanner is not yet compatible with P3DV5...otherwise the ideas is great Link to comment Share on other sites More sharing options...
Popular Post mischung Posted April 23, 2020 Popular Post Share Posted April 23, 2020 Out of interest I tried to check the differences in ICAO-codes between P3D V4 and V5. For this purpose I used the tool makeRunways from Pete and John Dowson on a vanilla install of V4 and V5. Then I eliminated airports with unchanged ICAO and afterwards I checked the airport coordinates to match the remaining airports with different ICAOs and here is a list with all differences I could find. There are 496 changed ICAO-codes and I also included this list as CSV. Hopefully this is helpful DiffP3DV4_V5.csv 6 5 Link to comment Share on other sites More sharing options...
Graham Eccleston Posted April 23, 2020 Author Share Posted April 23, 2020 Great work, definitely most helpful. thank you very much. Link to comment Share on other sites More sharing options...
vrdubin6 Posted April 29, 2020 Share Posted April 29, 2020 I searched the Excel document and wasn't able to find Joseph State Airport. Was 4S3 and is now KJSY. Link to comment Share on other sites More sharing options...
mischung Posted April 30, 2020 Share Posted April 30, 2020 20 hours ago, vrdubin6 said: I searched the Excel document and wasn't able to find Joseph State Airport. Was 4S3 and is now KJSY. Hi, unfortunately my search "algorithm" was not good enough Not all airports with changed ICAOs are included in my list! I tried a different approach with calculating the distance between airports, finding the closest match of an old V4 to a new V5 airport. Now I have a really big list and tried to compile a new "Changed ICAO list", but there are many circumstances to consider: The ICAO code and the airport position did not change -> The easiest part The ICAO code is no longer in use (in V5), but an airport with a new ICAO is at the exact same position -> Also easy, this is a replaced ICAO of course. The ICAO code is no longer in use (in V5), but there is no airport at the exact same position?!? -> Is this an ICAO-change? Is it a corrected airport location and an ICAO change? Is the old airport simply closed and there is a new one? The ICAO is still in use in V5, but the airport position changed. -> Maybe the ICAO has been re-used and the V4-airport is decomissoned? Or an old airport has been closed and is now located elsewhere with the same ICAO? That was the point where I lost my motivation and stopped working on this... I think I will give it another try and compile a list with different categories, so anyone can look into it and look up specific airports. Some of them have to be manually checked, because some changes cannot be detected automatically... Marc 2 Link to comment Share on other sites More sharing options...
Megadyptes Posted May 2, 2020 Share Posted May 2, 2020 Dunno if you want completely removed airfields as well but EGTG Filton Airfield which was shut down in 2012 has been finally removed in v5. rip. Link to comment Share on other sites More sharing options...
Lawrence Hickerson Posted May 4, 2020 Share Posted May 4, 2020 I have an issue with KGPI and the old Kalispell KFCA. Both exist with KFCA about 25 feet lower. Not an issue until you try to go down the runway and drop into the other world. Link to comment Share on other sites More sharing options...
mischung Posted May 10, 2020 Share Posted May 10, 2020 Ok, I'm back with another updated comparison of the airports in P3DV4 and V5. I compiled three different lists and also included a readme-file with the description of what is included and what it means. With this data it should be easy to check for any discrepancy between the V4 and V5-database using Excel or other programs of course: The csv-files are attached P3DV4V5_ICAO_Matches_and_is_closest.csv P3DV4V5_ICAO_Matches_but_is_not_closest.csv P3DV4V5_ICAO_NoMatch_decommissioned_or_changed.csv Cheers, Marc Here is the content of the Readme-file: This is a comparison of all airports in P3D V4HF2 with the updated airports in P3D V5HF1. I checked all V4 ICAO-codes against all airports available in V5 and calculated the distance between them. Then I filtered for the V5-airports which are closest to the old V4-airports, but also checked for a matching ICAO-code, even if this is not the closest airport in V5. --- Three lists are included for further evaluation --- They contain the following data: ICAO - The ICAO code of the airport in V4 Name - The name of the airport in V4 City - The city of the airport in V4 Lat - The latitude of the airport in V4 Lon - The longitude of the airport in V4 Alt - The altitude of the airport in V4 Rwy1 - The 1st Rwy of the airport in V4 Rwy2 - The 2nd Rwy of the airport in V4 Rwy3 - The 3rd Rwy of the airport in V4 Rwy4 - The 4th Rwy of the airport in V4 MinDist - The distance to the closest airport found in V5 (in km) ICAO_MinDist - The ICAO code of the closest airport in V5 Name_MinDist - The name of the closest airport in V5 City_MinDist - The city of the closest airport in V5 Lat_MinDist - The latitude of the closest airport in V5 Lon_MinDist - The longitude of the closest airport in V5 Alt_MinDist - The altitude of the closest airport in V5 Rwy1 MinDist - The 1st Rwy of the closest airport in V5 Rwy2 MinDist - The 2nd Rwy of the closest airport in V5 Rwy3 MinDist - The 3rd Rwy of the closest airport in V5 Rwy4 MinDist - The 4th Rwy of the closest airport in V5 ICAO_V4andV5 - Just a "Yes" or "No" if the ICAO is used in V4 and V5 ICAO_Match - The ICAO code of the ICAO-match in V5 Name_Match - The name of the ICAO-match in V5 City_Match - The city of the ICAO-match in V5 Lat_Match - The latitude of the ICAO-match in V5 Lon_Match - The longitude of the ICAO-match in V5 Alt_Match - The altitude of the ICAO-match in V5 Rwy1 Match - The 1st Rwy of the ICAO-match in V5 Rwy2 Match - The 2nd Rwy of the ICAO-match in V5 Rwy3 Match - The 3rd Rwy of the ICAO-match in V5 Rwy4 Match - The 4th Rwy of the ICAO-match in V5 1) P3DV4V5_ICAO_Matches_and_is_closest.csv Explanation: The ICAO-code is available in V4 and V5. The airport with the matching ICAO-code is also the closest airport. What does it mean: - The airport was not changed. - The airport was slightly corrected in position. - The airport was closed and a new airport was opened close by with the same ICAO. 2) P3DV4V5_ICAO_Matches_but_is_not_closest.csv Explanation: The ICAO-code is available in V4 and V5. But the matching ICAO-airport is not the closest airport! What does it mean: - The airport has been re-located using the same ICAO, but another airport in V5 is now closer to the old airport-position in V4. (maybe a small airfield) - The ICAO has been reused for a different airport, so the old V4-airport has been decommissioned. 3) P3DV4V5_ICAO_NoMatch_decommissioned_or_changed.csv Explanation: The V4 ICAO-code is not available in V5. What does it mean: - The V4-airport has been decommissioned - closest airport found should be checked for consistency! - The V4 ICAO was changed - the closest match with the given distance should be checked! Readme.txt 1 3 Link to comment Share on other sites More sharing options...
Graham Eccleston Posted May 11, 2020 Author Share Posted May 11, 2020 Very nice work. Thank you very much for the time and effort you have put into this, it is most helpful and greatly appreciated. Link to comment Share on other sites More sharing options...
PhilK Posted May 11, 2020 Share Posted May 11, 2020 (edited) On a vanilla P3Dv5 Installation: Changed: P3D4 KL2 -> P3D5 CKL2 P3D4 KV4 -> P3D5 CKV4 New (added): CAS2 - Moose Lake (Lodge) Airport - in real world, close to CBE8, Moose Lake (Lodge) Water Aerodrome CJK2 - Gunisao Lake Airport - in real world, close to CJW8, Gunisao Lake Water Aerodrome Still under old ICAO: P3D4 MXA4 - Estacion Aeronaval, Tulum - still in P3D5, although ICAO was changed to MMTU, now Tulum Airport in Skyvector Edited May 11, 2020 by PhilK Link to comment Share on other sites More sharing options...
Dusterman Posted May 11, 2020 Share Posted May 11, 2020 KCVH, Hollister Municipal Airport, California, used to be 3O7. Hope this new P3D version updates the airport info automatically, as X=Plane does. Link to comment Share on other sites More sharing options...
Joel A Posted May 16, 2020 Share Posted May 16, 2020 Landed at Tillamook in Oregon and had all kinds of weird problems. Now I know why! It's on the list. Great work. On 5/10/2020 at 1:27 AM, mischung said: Ok, I'm back with another updated comparison of the airports in P3DV4 and V5. I compiled three different lists and also included a readme-file with the description of what is included and what it means. With this data it should be easy to check for any discrepancy between the V4 and V5-database using Excel or other programs of course: The csv-files are attached P3DV4V5_ICAO_Matches_and_is_closest.csv 4.03 MB · 5 downloads P3DV4V5_ICAO_Matches_but_is_not_closest.csv 32.73 kB · 6 downloads P3DV4V5_ICAO_NoMatch_decommissioned_or_changed.csv 254.19 kB · 7 downloads Cheers, Marc Here is the content of the Readme-file: This is a comparison of all airports in P3D V4HF2 with the updated airports in P3D V5HF1. I checked all V4 ICAO-codes against all airports available in V5 and calculated the distance between them. Then I filtered for the V5-airports which are closest to the old V4-airports, but also checked for a matching ICAO-code, even if this is not the closest airport in V5. --- Three lists are included for further evaluation --- They contain the following data: ICAO - The ICAO code of the airport in V4 Name - The name of the airport in V4 City - The city of the airport in V4 Lat - The latitude of the airport in V4 Lon - The longitude of the airport in V4 Alt - The altitude of the airport in V4 Rwy1 - The 1st Rwy of the airport in V4 Rwy2 - The 2nd Rwy of the airport in V4 Rwy3 - The 3rd Rwy of the airport in V4 Rwy4 - The 4th Rwy of the airport in V4 MinDist - The distance to the closest airport found in V5 (in km) ICAO_MinDist - The ICAO code of the closest airport in V5 Name_MinDist - The name of the closest airport in V5 City_MinDist - The city of the closest airport in V5 Lat_MinDist - The latitude of the closest airport in V5 Lon_MinDist - The longitude of the closest airport in V5 Alt_MinDist - The altitude of the closest airport in V5 Rwy1 MinDist - The 1st Rwy of the closest airport in V5 Rwy2 MinDist - The 2nd Rwy of the closest airport in V5 Rwy3 MinDist - The 3rd Rwy of the closest airport in V5 Rwy4 MinDist - The 4th Rwy of the closest airport in V5 ICAO_V4andV5 - Just a "Yes" or "No" if the ICAO is used in V4 and V5 ICAO_Match - The ICAO code of the ICAO-match in V5 Name_Match - The name of the ICAO-match in V5 City_Match - The city of the ICAO-match in V5 Lat_Match - The latitude of the ICAO-match in V5 Lon_Match - The longitude of the ICAO-match in V5 Alt_Match - The altitude of the ICAO-match in V5 Rwy1 Match - The 1st Rwy of the ICAO-match in V5 Rwy2 Match - The 2nd Rwy of the ICAO-match in V5 Rwy3 Match - The 3rd Rwy of the ICAO-match in V5 Rwy4 Match - The 4th Rwy of the ICAO-match in V5 1) P3DV4V5_ICAO_Matches_and_is_closest.csv Explanation: The ICAO-code is available in V4 and V5. The airport with the matching ICAO-code is also the closest airport. What does it mean: - The airport was not changed. - The airport was slightly corrected in position. - The airport was closed and a new airport was opened close by with the same ICAO. 2) P3DV4V5_ICAO_Matches_but_is_not_closest.csv Explanation: The ICAO-code is available in V4 and V5. But the matching ICAO-airport is not the closest airport! What does it mean: - The airport has been re-located using the same ICAO, but another airport in V5 is now closer to the old airport-position in V4. (maybe a small airfield) - The ICAO has been reused for a different airport, so the old V4-airport has been decommissioned. 3) P3DV4V5_ICAO_NoMatch_decommissioned_or_changed.csv Explanation: The V4 ICAO-code is not available in V5. What does it mean: - The V4-airport has been decommissioned - closest airport found should be checked for consistency! - The V4 ICAO was changed - the closest match with the given distance should be checked! Readme.txt 3.42 kB · 6 downloads Link to comment Share on other sites More sharing options...
DonH Posted May 24, 2020 Share Posted May 24, 2020 APEX Airpark WA05, Altitude 502' - 8W5, Altitude 525' one on top of the other in True Earth Washington, P3Dv5. PNW Region is installed. Link to comment Share on other sites More sharing options...
Gasman5 Posted July 5, 2020 Share Posted July 5, 2020 FADN closed down and no longer exists. Link to comment Share on other sites More sharing options...
kopolla Posted July 28, 2020 Share Posted July 28, 2020 Not sure if it had been mentioned before, but EU80 turned into EDJG Link to comment Share on other sites More sharing options...
Recommended Posts