kingpin911221 Posted September 10, 2018 Share Posted September 10, 2018 I have Blurries at LDPL and also LDDU (Orbx Airports) Surrounding seems to be good P3dV4.3 cfg untouched (only TextureMaxEXP=9) FPS locked (30) doesnt help too!! My PC: IntelI7 770K 4.8 Ghz 32GB DDR4 GeforceGTX1080 Anybody an idea ?? Link to comment Share on other sites More sharing options...
Scott Harmes Posted September 14, 2018 Share Posted September 14, 2018 Hi, A couple of settings changes for you to try: FXAA = Off VSync = Off Triple Buffering = Unchecked Target Frame Rate = 30 Level of Detail Radius = Ultra Also make sure to check the control panel and try out different options. Options such as seasonal vegetation and seasonal grass will have a negative effect on performance. Be sure to adjust the Vector settings to reflect if you have Vector installed or not. It may be a requirement to reduce the airport settings if flying in to the area in a complex airliner and/or at speed. Give this a try and let us know if it improves. Cheers, Link to comment Share on other sites More sharing options...
rockliffe Posted September 14, 2018 Share Posted September 14, 2018 I suspect it's the fact that you are running unlimited frames. Locking the framerate will allow more resources for scenery loading. I have encountered similar issues when arriving at a location with no autogen! Your settings seem perfectly OK with the hardware you have. Has it happened more than once? If not, it could also be a Windows update that kicked in at that point during the flight. Link to comment Share on other sites More sharing options...
kingpin911221 Posted September 15, 2018 Author Share Posted September 15, 2018 Thx for suggestions! I will give it a try and let you know if it helped. Yes it happend always, so i guess it isnt a Win Update. Best regards Steven Link to comment Share on other sites More sharing options...
kingpin911221 Posted September 29, 2018 Author Share Posted September 29, 2018 Hello! i changed settings, and locked the Frames in P3D, no change I bought a new Graphics Card (GTX 1080 TI) and TEXT EXP 10 is not possible to set because of stutters, so i left EXP = 9, now i have Mountains Bumping too (They are sharp but Changing Form !) I dont know what to do :( Regards to everybody Link to comment Share on other sites More sharing options...
Nick Cooper Posted September 29, 2018 Share Posted September 29, 2018 Hello, you might try a new Prepar3D.cfg file without any "tweaks". Wriggling mountains are a mesh problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.