Search the Community
Showing results for tags 'scenery'.
-
I'm a new comer to Orbx. I have several friend who have bought and who love your products I want to slowly get north America updated as I tend to fly there most often. I have the vector and global bundle in my cart, (this is the 4 item bundle that seems to be recommended to start my journey with you guys.) so after all of that, what do I need to get all airports and runways and gates updated all at once in north America only? the product page is a bit confusing. I have the following in my cart. My friend said that I only need these 4 to update my airports' runways, gates, etc? Somehow I don't think so. I am on a tight budget right now so I want to start out with something. Global Buildings HD Global VECTOR Global BASE Pack Global TerraFlora v2 thanks. -
Dear Orbx, After I have installed the scenery, everything seems fine except for one problem I have with the jetways at the international terminal. They for some reason aligned improperly. Can you please help me with this? I have attached a picture to show you how it looks like. Many thanks. Sincerely, Nico -
Hello, Can anyone advise why this airport is not in the MSFC scenery, in other words I am unable to find the airport in the world map menu? -
I've had Washington TE, Oregon TE and Darrington 1S2 installed for a few weeks now with no problems. But recently XP began CTD's and in troubleshooting, I moved groups of Custom Scenery content in and out of XP while trying to isolate the problem. I've narrowed the cause away from scenery to X-Camera and some other factor but in shuffling all my scenery around, Darrington no longer loads. I've placed 1S2 at the top of the Scenery Pack.ini, deleted the ini and let XP rebuild it, removed and reinstalled the scenery through Orbx Central. At this point I'm running only the TE sceneries and Darrington, let XP decide the scenery priority, and the attached files are the result. Having made this mess, can I correct it? Thanks for any help. scenery_packs.ini
-
Hey guys which is the best load order in the scenery libary for germany north and south my other scenerys by Orbx are openlc and base and airports. All other scenerys are by other devs. Thank you very much -
Was on a night flight from KDEN to KDFW - closing up on waypoint VKTRY (start of STAR VKTRY2 into KDFW runway 18L) I saw this strange pattern of light dots (either vertical or horizontal - hard to tell). Anybody experienced a similar issues? I have Orbx Global Base pack, Global Trees HD, Global Vector and Global OpenLCNorthAmerica installed. And it is P3D V5 HF2, FSDreamTeam KDFW and latest FSL A320 v5.0.1.105. Windows 10 64Bit 2004. Søren -
I am unable to see lakes and rivers in a numer of sceneries including Europe & California true earth. I fly over the water, the water shows on the map but out of the window there is normal land scenery. The adjacent mountains and airports appear correct. Example is around LSMI Interlaken, none of the surrounding water shows. add-ons-cfg No lakes.txt scenery-cfg No lakes.txt
-
Just upgraded to latest Orbx Central. All existing scenery updated as part of installation. Only problem was with YBAS - installed with1 file failing to extract. Tried the verify option, no luck. Uninstalled and reinstalled YBAS. Error still apparent - 1 file failed to extract. Any suggestions? -
Hello, I recently purchased ESMS Malmo and ESGG Lemverder -Gothenburg I am intending to upgrade my system installing an additional SSD and increase RAM, will the new SSD "see"" the operating system simulator IE P3DV4.5 and will I be able to add scenery from Orbx to my system utilising the new drive. My second question is when downloading new scenery I note you get a choice of where to locate the the new scenery ie with thin P3D or another external scenery library it always says if unsire put it in the P3D location scenery library what are the pros and cons of scenery location library's when installing new scenery packages. I ask this as my C Drive SSD (1TB) is up to 50% capacity and I am hoping if I chose i can still obtain any additional scenery I may want and use with P3D v4.5
-
In P3D V4.5, I am seeing small scenery blocks of black/orange scattered in my overall scenery. I have Orbx Global Base Pack and NA Southern California installed. Might this be an Orbx issue? See images below Thanks Bob Lopez golfacce@aol.com
-
Hello, Few weeks ago I bought the LOWI airport scenery, but there are many issues. The transaction ID / receipt number is 5964f880cf7b2. First thing that I don't like is that the airplane can't be placed next to the Gates nor on parking. The only possible start position - is a runway, however, the airport itself has abilities, parking places, entire infrastructure for normal boarding process. It's not realistic to start a flight on a passenger jet directly from runway. ((((( The localiser is broken, it shows wrong direction to the runway when landing, making it impossible to capture glideslow and runway direction automatically, everything has to be done manually. When installing the scenery I didn't have any errors or other problems, everything was smoothly until I started flying to that airport. Should I try to download and install the latest version?
-
Hello, I have a question about the freeware library from Orbx: Can I use it in my custom scenery and then upload to Xplane.org? I love the quality of the objects so I would like to use them in my custom sceneries. Obviously I will clarify that I have used the library and leave the link to download it Thanks for reading. -
Hi All, I was just wondering how long it takes to get airport scenery upgraded as YBBN in Australia has opened a new runway which is not reflected in the current airport scenery on Orbx but the new Airac 2006 reflects the changes. As of now I can't fly into YBBN with the new airac 2006 as the airport does not match the airac.
-
Hello, Can you assist /rectify error with scenery at LOWS Please, screen shot attached, I tried Verify Files and Auto Config in Global Vector Menu Building (castle) in mid air out of context. Win 10 64 bit P3D v4.5 with Hot Fix 3 installed
-
Hi, I am not too sure for how long I have had this problem as the areas I have generally been flying seemed ok to me. A friend has been trying to pull me to XP 11 and show me his sceneries and that made me wonder. My conclusion is that I have a problem with my sceneries and I need help. Needless to say, I'm staying with FSX:SE and waiting for MSFS 2020. Flying over Southern California it appears to be ok, but a section of the ocean is black while the rest is ocean/water colour. Flying over the UK is definitely much better, lush green and detail but yet again with some black patches. The worse of all is in Michigan lake in the Canadian side where the tiling is very severe and water and land share the same space. Please refer to the pdf below with some images of what I described above. I am running FSX:SE in W10 (latest update) more RAM than needed, i7 8th Gen. nVidia 1080, two HHD and one SSD. Complete Saitek gear managed by SpadneXt. Three monitors plus a tablet. Add-ons are only A2A, RealAir Duke Turbo v2, Q400 Pro, Orbx, REX, Track IR, F1 GTN750. The computer is very much dedicated to FS. Orbx scenery problem.pdf -
So I've recently bought the GB south scenery and I've downloaded it. When I open up x-plane it only seems to be loading part of it. I've tried redownloading it once.
-
We have just moved our training base to Oxford Kidlington airport (EGTK). On entering the main apron from the south there is a group of three people, two male, one female, standing on the taxiway about 7 ft on the east side of the centre-line. Why? By making EGTK files active/non-active I have managed to narrow the file in which these folk reside as FTX_ENG_EGTK_objects.bgl which you will know resides in FTX_EU_ENG_05_SCENERY. Is there any way I can edit this file to remove these figures? If not, could they be edited out in a future update. Sounds like a small thing, but when teaching it stops the immersion factor for the student. Cheers, rr
-
Hi can anyone help. Sorry if this should be posted somewhere else. I had p3d v4 installed on my D: drive, something went wrong and I ended up uninstalling off this drive. On the reinstall it ended up on C: drive, reinstalled Orbx BASE Pack VECTOR open LC Europe,Mesh South America, North America Regions England Scotland Iceland Demo Pacific Northwest Demo The Pics show what I'm seeing. Something somewhere has become corrupt in the install, I think. Any advise will be welcomed
-
Just loaded AUS 3 scenery intpPD3 ver 4.5 and getting lakes and black textures around Ymml airport. See attached photo. How can I remove lakes and black textures ? -
Hi I'm a big Australia fan and I like to fly in Australia. My biggest wish is to have Perth Intl.and Darwin Intl. Airport. Are there any plans for those two Airports in the future? I'm realy looking forward to that
-
Does anybody know how to unlock the ORBX FTX_EU files in the scenery library of P3Dv4? At this moment I could not move up some Dutch airports above the trueEarth Netherlands scenery area. Because of this the global ORBX scenery is overwriting the detailed airports and some buildings disappears since I could not give them an higher prioriry. I tried to delete some notes in the add-on.xml but the enable square stays grey. Thanks in advance.
-
Hello, I need some help about BIKF. I use P3Dv4.5 on Windows 10 and have installed the products of ORBX: Base Pack, VECTOR, Open LC Europe, Open LC North America, Open LC South America, England and Norway (Regions) and EGLC, EGPH, ESGG, ESSA, LDDU, LEAS, LIEO and LOWI. Orbx Object Flow, SODE, TFDi (RealLight), TFDi (TrueGlass) and XMLT. Other, may be important, is Pilot´s FSG -FS Global Ultimate NEXT GENERATION FTX. The screenshot shows a view of BIKF after the altitud of BIKF are modified on GSX: the jetways are on ground but they are not in the (correct) place. It is a minor problem, but, for me, may be a symptom of a wrong priority settings. All the pieces of software are up to date and situated in the correct place in scenery and no other definition of BIKF I have active, but seems to me the problem is another definition of BIKF interfere. Can you suggest me a way for correct the problem?. I read carefully all the information in the forum about correction of altitude, but I have not encountered information about misplaced jetways. Thank you in advance. Emilio Casalduero Madrid (Spain)
-
Hello, I have weird scenery at above airport runway surrounded by mountains , cannot see run way, same on parking stand. Have been in to vector to disable elevation correction - no change also been looking for BGL file to BGL.OFF cannot find for KSNC. Any Help much appreciated Charlie McEwan
-
Recently purchased the scenery on the Orbx website and have tried to activate the scenery in game but couldn't get much further. Everything still stays at the default scenery provided by FSX. Not sure what to do. Cheers. -
active Default Scenery Still Showing! (Sometimes)
OllieT posted a topic in PREPAR3D® V4.x Support Forum
Hello I am having some slight issue's with my ORBX Europe LC + FTX Global I am running P3D 4.5 as it stands So the problem is when flying over Europe in general, some of the tiles are still showing as default scenery and the rest are orbx I am guessing it is a scenery library issue and to do with the order of them potentially. Any suggestions!? Thanks
