Jon Clarke

You could group them into one new post as it is not actually a technical support topic but place the new post in this XP support forum. Be aware that Tony spends limited time on the forum due to workload, so maybe if I relayed your questions to him it may be simpler

I need to talk with Tony the Dev via email so I will get back to you as soon as I have made contact and he responds. Probably not for a day or so due to weekend.

I will test my end and respond

@Tony Wroblewskifor comment please. @manidep271 Please ask Tony your questions here.

@manidep271Which airport is the pic of please

Please expand what you mean. You unzip the file and use it to replace the existing Orbx_A_EU_Spain_South_TE_Airports

Unfortunately no. I can only suggest going out of Orbx Central completely, rebooting PC and then trying again

Best wishes @Richard Lincoln. Same to you @Capt Pugwash

Nice and simple to use addon if you are not looking for absolute perfection. It enhances immersion compared to the default fake plane textures. Well a worth a few bucks to enhance the sim

I apologise. I failed to read that the issue concerned Orbx Central and P3D. I am XP11.

Check if anything relating to TEGB North appears in your Custom Scenery folder. If it does then just delete it. Reboot PC. Open Orbx Central. If it starts to try and download again, Open up the download icon at the top of the page which i have circled in red The following pics show the process: Now click on Pause: Now click on the X. It will then show it is cancelling and state there is nothing more in the queue After that is all done I suggest you then go to Orbx central/settings/downloader and click on Clear Temp folder

You're welcome

Thanks Tony for the clarifications.

Here is what I see at EPKT: With Statics and photoscenery: Without statics: Please post what you see

Orbx Central has an update for SAM to c=version 3.0.10. Please check if tat option is available n your Orbx Central:

I can only refer you to the screenshots displayed on te product page at Orbx Direct regarding the quality but can confirm it is HD. Regarding whether you can still use your ortho4xp tile I would have to refer that question to the Dev @Tony Wroblewski. A general statement though is that Orbx does not make addons designed to be compatible with ortho4xp but makes them compatible with default Laminar scenery and Orbx TE regional scenery.

Thanks for the feedback. The test you did show nothing is wrong with the addon, but does indicate that there is a problem with other addons which causes a memory issue. I can only suggest looking through your addons and seeing if there are any that you really don't use much or you can disable some when flying in Australia near YMEN

A while back the Dev of X-Organiser was in discussion with our True Earth dev regarding the way that X-Organiser misplaced TE addon scenery in the scenery_packs especially after being disabled and then enabled again. TE addons should always be directly under Global Airports and the 3 files of Custom, Overlay and orthos should not be separated. My understanding was that after the talks there was a newer version of the Organiser issued that assisted in resolving the issue. You may wish to check that out.

@Nick Cooper please oblige and move this to Volanta support

@Nick Cooper Please move this to the Support forum as I don't believe it is a BUG but a different issue. @KQ707 I have rearranged the scenery_packs to see if that makes any difference so please try and report back. If that doesn't resolve your issue we need to test other options to determine the cause. The first and easiest is to choose the Verify Files option for YMEN in Orbx Central. This will show if there are any missing files for YMEN (I seriously doubt there will be) The second and best by far is to rename your Custom Scenery folder to Custom Scenery.bak Drag and drop YMEN, Global Airports and OrbxLibsXP from your Custom Scenery.bak folder into the new Custom Scenery folder. Make sure that YMEN sits above Global Airports in the new scenery_packs.ini. OrbxLibsXP can be anywhere for this test. Now try a flight which leaves and returns to YMEN. Looking at your log file at the point of your CTD the log is stating you are very low on Memory and to turn down your rendering settings etc. Here is the extract from your log file: 0:50:49.971 E/SYS: MACIBM_alert: X-Plane is running very low on memory. 0:50:49.971 E/SYS: MACIBM_alert: Scenery loading is now disabled. 0:50:49.971 E/SYS: MACIBM_alert: To avoid a crash, please turn down your settings and restart the sim as soon as possible. 0:50:49.971 E/SYS: MACIBM_alert: http://lookup.x-plane.com/_lookup_11_/lo_mem.html 0:50:49.971 E/SYS: MACIBM_alert: C:\jenkins\design-triggered\source_code\core\memory\UTL_memory.cpp:1097 0:50:54.573 E/SYS: THREAD FATAL ASSERT: X-Plane is totally out of memory. 0:50:54.573 E/SYS: THREAD FATAL ASSERT: Next time, turn down your rendering settings or remove add-ons to avoid this problem. 0:50:54.573 E/SYS: THREAD FATAL ASSERT: If you cannot restart X-Plane you may have to delete your preferences, found in the Output folder. 0:50:54.573 E/SYS: THREAD FATAL ASSERT: 0:50:54.573 E/SYS: THREAD FATAL ASSERT: C:\jenkins\design-triggered\source_code\core\memory\UTL_memory.cpp:1119 0:50:54.573 E/SYS: +------------------------------------------------------------------------------- 0:50:54.573 E/SYS: | X-Plane is running very low on memory. 0:50:54.573 E/SYS: | Scenery loading is now disabled. 0:50:54.573 E/SYS: | To avoid a crash, please turn down your settings and restart the sim as soon as possible. 0:50:54.573 E/SYS: | http://lookup.x-plane.com/_lookup_11_/lo_mem.html 0:50:54.573 E/SYS: | (UTL_memory.cpp:1097) 0:50:54.573 E/SYS: +------------------------------------------------------------------------------- --=={This application has crashed!}==-- The test I suggest above will only have YMEN and OrbxLibsXP and Global Airports in the Custom Scenery folder so there are no other scenery demands which could affect the demands on Memory. Report back please especially on the results of the new Custom Scenery and limited addons test. Place this revised scenery_packs.ini into your current Custom Scenery folder to replace your existing one. scenery_packs.ini

@Nick Cooper Please move this to Volanta support

I have rearranged the scenery_packs.ini to optimise it. Regarding FPS I cannot comment as the fps rate will vary considerably dependent on hardware, and location within TEGB. London fps will be hugely different to flying over the Highlands of Scotland for example as you well know. so to quote seeing 50-70 fps previously would only have been in a fairly sparse autogen/ buildings area I would guess. I have a 1080Ti and will get 28-32 fps around EGLC heading into central London and Heathrow. Again it also depends heavily on your XP settings which you have not mentioned nor whether you use Vulkan or Metal (are you on Windows or Mac?) Hope this helps: scenery_packs.ini

Apologies. I just found it.

I will get back to you but I don't see Global Airports in your scenery_packs. Is it in Custom Scenery folder?

You are welcome and again apologies for your unresolved issues.